;-------------------------------------------------------------------
;
; OEMSETUP.INF
; NIC Installation Script for Windows NT 4.0
;
; Product: IBM Token-Ring PCI Family Adapters
; Copyright (C) 1996-1998 IBM Corporation. All rights reserved.
;
; Version: 2.7 (9/25/98 17:41:32)
; MfC-NT4.0-NoMSS
;
;-------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[LanguagesSupported]
ENG
[Options]
TRP
[OptionsTextENG]
TRP = "IBM Token-Ring PCI Family Adapter"
[GeneralConstants]
from = ""
to = ""
KeyNull = ""
AdapterList = {}
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
TRUE = 1
FALSE = 0
NoTitle = 0
OldVersionExisted = $(FALSE)
[FileConstants]
; These should be left alone.
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
SubroutineInf = "SUBROUTN.INF"
SoftwareType = "driver"
NetRuleSoftwareUse = $(SoftwareType)
; Event logging message files
NetEventDLL = "%SystemRoot%\System32\NETEVENT.DLL;%SystemRoot%\System32\IBMSGNET.DLL"
; These constants vary depending on Software, Manufacturer, etc.
Manufacturer = "IBM"
ProductMajorVersion = "3"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
; Dialog box parameters
InstallDLL = $(!STF_WINDOWSSYSPATH)"\TokStp2.Dll"
; PnP Information
IBM_VENDOR_ID = 4116 ; 0x1014 in decimal
PIT_DEVICE_ID = 62 ; 0x003E in decimal
PIT_ADAPTER_ID = 269746238 ; 0x1014003E in decimal
; Hardware binding information.
ProductHardwareName = "IBMTRP"
NetRuleHardwareType = "IBMTRP IBMTRPAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"IBMTRPAdapter basic"}
; Software binding information.
ProductSoftwareName = "IBMTRP"
NetRuleSoftwareType = "IBMTRPSys ndisDriver IBMTRPDriver"
NetRuleSoftwareBindForm = """IBMTRPSys"" yes no container"
NetRuleSoftwareClass = {"IBMTRP basic"}
NetRuleSoftwareBindable = {"IBMTRPDriver IBMTRPAdapter non exclusive 100"}
ProductSoftwareImagePath = "%SystemRoot%\system32\drivers\IBMTRP.SYS"
; Various places in the registry we use
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
; We used to keep our ProductKeyName in the Microsoft sub-tree... oops.
; This is used in both RemoveAdapter and UpgradeSoftware portion of the INF.
OldProductKeyName = $(!NTN_SoftwareBase)"\Microsoft\"$(ProductSoftwareName)"\CurrentVersion"
OldManufacturer = "Microsoft"
; NDIS Level Strings (default is NDIS4_Level; changed later if Windows NT 3.5x detected)
NDIS4_Level = "NDIS 4.0"
NDIS3_Level = "NDIS 3.1"
NDIS_Level = $(NDIS4_Level)
; Uncomment the appropriate lines below if you want to install
; a certain NDIS level driver REGARDLESS of the INF's detection
; of the Operating System. This can be useful if you want to
; mandate use of the NDIS 3.1 miniport.
; ForceNDIS = "NO" ; the default, comment out if forcing
; ForceNDIS = $(NDIS3_Level) ; force use of NDIS 3.1
ForceNDIS = $(NDIS4_Level) ; force use of NDIS 4.0
; No CSD applied string
NO_CSD = "NO_CSD"
; Driver location after installation
DriverFile = "IBMTRP.SYS"
; No secondary adapter
RNIC_Not = "XXXXXX"
[FileConstantsENG]
; Contains localized strings for the appropriate version of the adapter.
FunctionTitle = "IBM Token Ring PCI Family NIC Miniport Setup"
ProductSoftwareDescription = "IBM Token-Ring PCI Family Adapter Miniport"
ProductHardwareDescription = "IBM Token-Ring PCI Family Adapter"
ProductSoftwareTitle = "IBM Token-Ring PCI Family Adapter Miniport"
ProductHardwareTitle = "IBM Token-Ring PCI Family Adapter " ; Leave in trailing space
CANNOT_FIND_ANY_CARD = "The adapter you selected is not present in the system."
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "OEMSETUP.INF Shell Code Error!"
DiskName = "Token Ring PCI Device Drivers: Windows 95/98/NT (CD-ROM or diskette)"
TRP_TITLE = "IBM Token-Ring PCI Family Adapter"
; These lines are to fix a bug in gauge.c line 209 in WinNT 4.x checked build.
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
;-------------------------------------------------------------------
; SECTION NAME: Identify
;
; DESCRIPTION: This required section verifies that this
; script supports the option currently selected.
;
; INPUT: None.
;
; OUTPUT: $($R0) Status
; $($R1) Option Type
; $($R2) Diskette Description
;-------------------------------------------------------------------
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
return $(Status) $(OptionType) $(Media)
;-------------------------------------------------------------------
; SECTION NAME: ReturnOptions
;
; DESCRIPTION: This required section returns the list of
; options supported by this script and the
; text list representing the options.
;
;
; INPUT: $($0) Language code
;
; OUTPUT: $($R0) Status
; $($R1) Option List
; $($R2) Option Text List
;-------------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
ifcontains(i) $($0) not-in $(LanguageList)
set Status = STATUS_NOLANGUAGE
goto End_ReturnOptions
endif
ifstr(i) $($1) == ""
goto OK_ReturnOptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto OK_ReturnOptions
else
set Status = STATUS_NOTSUPPORTED
goto End_ReturnOptions
endif
OK_ReturnOptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
; ** Hack for upgrading older IBMTRP full MAC driver --sgp
ifstr(i) $(!NTN_InstallMode) == Update
Set OptionList = {"IBMTRP", "TRP" }
endif
set Status = STATUS_SUCCESSFUL
End_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;-----------------------------------------------------------------
;
; SECTION NAME: Source Media Description
;
; DESCRIPTION: This is a required DETECT section
;
;------------------------------------------------------------------
[Source Media Descriptions]
1 = $(DiskName)
;-------------------------------------------------------------------
; SECTION NAME: InstallOption
;
; DESCRIPTION: Main entry point. Shelled to by main
; installation processing or by NCPASHEL.INF
; during reconfiguration, removal, update,
; etc. It performs three main functions:
;
; 1. Copies files representing options
; 2. Configures the installed option
; 3. Updates the registry for the installed
; option.
;
; INPUT: $($0) Language to use
; $($1) OptionID to install
; $($2) SourceDirectory
; $($3) AddCopy (YES | NO)
; $($4) DoCopy (YES | NO)
; $($5) DoConfig (YES | NO)
;
; OUTPUT: $($R0) Status
;
;-------------------------------------------------------------------
[InstallOption]
; Uncomment the line below to enable debugging
; set !G:DebugOutputControl = 1
StartWait
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms OptionsText$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
; Optional features
set hasMSS = "NO"
set hasRNIC = "YES"
; This code detects the Windows NT Version from the registry
set CurrentVersionValue = ""
set CurrentCSDVersionValue = {}
Debug-Output "Getting version information from registry..."
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT
ifstr(i) $(KeyWinNT) != ""
GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue
set m_WinNTVersion = *($(CurrentVersionValue),4)
Debug-Output "** Current Windows NT Version is "$(m_WinNTVersion)
ifstr(i) $(m_WinNTVersion) == "4.0"
GetRegValue $(KeyWinNT) "CSDVersion" CurrentCSDVersionValue
ifstr(i) *($(CurrentCSDVersionValue),4) == ""
; Key doesn't exist, so no Service Pack applied!
set m_CSDVersion = $(NO_CSD)
Debug-Output "** Running NT 4.0: No service pack applied!"
else
set m_CSDVersion = *($(CurrentCSDVersionValue),4)
Debug-Output "** Running NT 4.0: Current Service Pack Level is "$(m_CSDVersion)
endif
endif
CloseRegKey $(KeyWinNT)
else
Debug-Output "No version information availiable."
endif
; Set the version information up for the proper version (NDIS3/NDIS4)
; we are installing. The default is to use the NDIS4 version.
set NDIS_Level = $(NDIS4_Level)
ifstr(i) $(m_WinNTVersion) == "3.51"
; Using WinNT 3.51 and NDIS 3.1 miniport!
set NDIS_Level = $(NDIS3_Level)
else-ifstr(i) $(m_WinNTVersion) == "3.50"
; Uh-oh... NT 3.50... abort!
set Error = "This driver release only supports Microsoft Windows NT versions 3.51 and 4.0."
set to = fatal
set from = fatal
goto fatal
endif
Debug-Output "Current Product Version we're installing is "$(ProductVersion)
; If NDIS4: this code detects whether the machine has more than one processor.
; Default is to set hasSMP to NO.
set hasSMP = "NO"
ifstr(i) $(NDIS_Level) == $(NDIS4_Level)
set Processor = ""
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DESCRIPTION\System\CentralProcessor\1" $(!REG_KEY_READ) KeyProc1
ifstr(i) $(KeyProc1) != ""
; Machine has at least two processors
set hasSMP = "YES"
CloseRegKey $(KeyProc1)
Debug-Output "(NDIS 4) Detected SMP Machine; setting hasSMP to YES"
endif
endif
; On older INFs, we used "Microsoft" for the manufacturer.
; Newer installs such as this one uses "IBM" (correctly!).
; This code detects where our software is located in the
; HKEY_LOCAL_MACHINE\Software tree so that the upgrade
; and removal functions work properly.
set KeyProduct = ""
set CurrentManufacturer = ""
set CurrentProductKeyName = ""
OpenRegKey $(!REG_H_LOCAL) "" $(OldProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr(i) $(KeyProduct) != $(KeyNull)
Debug-Output "Fixing setup for wrong manufacturer."
set CurrentManufacturer = $(OldManufacturer)
set CurrentProductKeyName = $(OldProductKeyName)
CloseRegKey $(KeyProduct)
else
set CurrentManufacturer = $(Manufacturer)
set CurrentProductKeyName = $(ProductKeyName)
endif
; The old Full MAC version of this driver used the option "IBMTRP".
; Correct it here so that, once we upgrade the component, it will still
; work.
ifstr(i) $(Option) == "IBMTRP"
set Option = "TRP"
endif
; Code to correct some unattended installations that don't set
; SrcDir correctly...
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Debug-Output "Doing unattended installation..."
ifstr(i) $(!OEMNetOption) == "YES"
ifstr(i) $(!OEMNetDrive) != ""
Debug-Output "Correcting SrcDir to point to !OEMNetDrive"
set SrcDir = $(!OEMNetDrive)
endif
endif
endif
; If ForceNDIS is set, check it fpr a NDIS version. Default to
; use the automatically detected version of NDIS 4.0.
ifstr(i) $(ForceNDIS) == $(NDIS3_Level)
set NDIS_Level = $(NDIS3_Level)
Debug-Output "NDIS 3.1 forced"
else-ifstr(i) $(ForceNDIS) == $(NDIS4_Level)
Debug-Output "NDIS 4.0 forced"
set NDIS_Level = $(NDIS4_Level)
else
Debug-Output "Using Automatically Detected NDIS Level"
endif
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
; -----------------------------------------------------------------
; Begin - Determine what option we are being called with
; -----------------------------------------------------------------
Begin = +
ifstr(i) $(!NTN_InstallMode) == DeInstall
set from = fatal
set to = fatal
goto RemoveAdapter
else-ifstr(i) $(!NTN_InstallMode) == Update
set from = fatal
set to = fatal
goto UpgradeSoftware
else-ifstr(i) $(!NTN_InstallMode) == Bind
set from = fatal
set to = fatal
goto BindingAdapter
else-ifstr(i) $(!NTN_InstallMode) == Configure
set CommonStatus = STATUS_REBOOT
Debug-Output "$(ProductKeyName) = "$(CurrentProductKeyName)
Debug-Output "$(!NTN_RegBase) = "$(!NTN_RegBase)
ifstr(i) $(CurrentProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
Debug-Output "Going to NonFatalInfo"
goto NonFatalInfo
endif
set from = fatal
set to = fatal
goto ConfigureAdapter
else
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set from = fatal
set to = fatal
goto InstallAdapter
endif
; -----------------------------------------------------------------
; InstallAdapter -
; -----------------------------------------------------------------
InstallAdapter = +
Debug-Output "Inside InstallAdapter"
Debug-Output "ProductKeyName = "$(CurrentProductKeyName)
set KeyProduct = ""
OpenRegKey $(!REG_H_LOCAL) "" $(CurrentProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Debug-Output "Just after OpenRegKey"
Debug-Output "KeyProduct = "$(KeyProduct)
Debug-Output "KeyNull = "$(KeyNull)
Ifstr $(KeyProduct) == $(KeyNull)
set OldVersionExisted = $(FALSE)
goto DetectAndInstall
endif
; -----------------------------------------------------------------
; OldInstall -
; -----------------------------------------------------------------
OldInstall = +
CloseRegKey $(KeyProduct)
ifstr(i) $(!NTN_RegBase) == $(CurrentProductKeyName)
Debug-Output "(!NTN_RegBase)="$(!NTN_RegBase)
Debug-Output "(ProductKeyName)="$(CurrentProductKeyName)
Debug-Output "(ProductSoftwareTitle)="$(ProductSoftwareTitle)
Debug-Output "(ProductVersion)="$(ProductVersion)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
Set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
; -----------------------------------------------------------------
; DetectAndInstall - Check to see if the adapter exists. If so,
; copy everything needed, and set default
; parameters regardless of whether the install
; is attended or unattended..
; -----------------------------------------------------------------
DetectAndInstall = +
Debug-Output "Detecting any PCI Token Ring adapters..."
; ------------------------------------------------------------
; Start of PCI logic
; ------------------------------------------------------------
set Vendor_ID = $(IBM_VENDOR_ID)
set Device_ID = $(PIT_DEVICE_ID)
Shell $(UtilityInf), GetPCIInformation, $(Vendor_ID), $(Device_ID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
ifstr(i) $(AdapterList) == {}
set PCI_List = {{0,-1,0}}
endif
goto ShellCodeError
else
set PCI_List = $($R0)
endif
ifstr(i) $(PCI_List) != {}
Debug-Output "PCI_List = "$(PCI_List)
ForListDo $(PCI_List)
Set BusSlotPCI = $($)
Set BusNumber = *($(BusSlotPCI),1)
Set SlotNumber = *($(BusSlotPCI),2)
Set NetcardId = $(PIT_ADAPTER_ID)
Set BusSlotPCI = {$(BusNumber),$(SlotNumber),$(NetcardId)}
Set AdapterList = >($(AdapterList),$(BusSlotPCI))
EndForListDo ; End of PCI_List
endif
Debug-Output "AdapterList ="$(AdapterList)
; ------------------------------------------------------------
; End of PCI logic
; ------------------------------------------------------------
ifstr(i) $(AdapterList) == {}
Debug-Output "Did not find any PCI Token-Ring Adapters"
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = STATUS_USERCANCEL
set from = "end"
goto nonfatal
endif
ifint $(OldVersionExisted) == $(FALSE)
goto NewDriverInstall
else
goto AfterNewDriverInstall
endif
NewDriverInstall = +
; -------------------------------------------------------------
; If new install: Copy the driver, INF, DLL and Help files.
; -------------------------------------------------------------
Debug-Output "Preparing to copy installation files..."
Debug-Output "STF_CWDDIR = "$(!STF_CWDDIR)
Debug-Output "STF_SRCDIR = "$(!STF_SRCDIR)
Install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
Debug-Output "Manufacturer = "$(CurrentManufacturer)
Debug-Output "ProductSoftwareName = "$(ProductSoftwareName)
Debug-Output "ProductSoftwareTitle = "$(ProductSoftwareTitle)
Debug-Output "STF_CONTEXTINFNAME = "$(STF_CONTEXTINFNAME)
Debug-Output "ProductSoftwareImagePath = "$(ProductSoftwareImagePath)
Debug-Output "NetEventDLL = "$(NetEventDLL)
Debug-Output "Finished file copy."
Shell $(UtilityInf), AddSoftwareComponent, $(CurrentManufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto FatalRegistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "NewValueList = "$(NewValueList)
Debug-Output "SoftProductKey ="$(SoftProductKey)
Debug-Output "SoftNetRuleKey ="$(SoftNetRuleKey)
Debug-Output "SoftServiceKey ="$(SoftServiceKey)
Debug-Output "SoftParameterKey ="$(SoftParameterKey)
Debug-Output "SoftLinkageKey ="$(SoftLinkageKey)
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto FatalRegistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "NewValueList = "$(NewValueList)
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto FatalRegistry
endif
AfterNewDriverInstall = +
;
; Loop through the Adapter List and install as many instances of the Token
; Ring Adapter that we have.
;
ForListDo $(AdapterList)
Set BusSlotPci = $($)
Set BusNumber = *($(BusSlotPci),1)
Set SlotNumber = *($(BusSlotPci),2)
Set NetcardId = *($(BusSlotPci),3)
; -------------------------------------------------
; If netcard is already installed, skip this entry
; -------------------------------------------------
Debug-Output "BusSlotPci = "$(BusSlotPci)
Debug-Output "BusNumber = "$(BusNumber)
Debug-Output "SlotNumber = "$(SlotNumber)
Debug-Output "NetcardId = "$(NetcardId)
Set AlreadyInstalled = "NO"
; Make a list of all the installed netcards
; OpenRegKey gets a handle to a Key
OpenRegKey +
$(!REG_H_LOCAL),+
"",+
$(NetworkCardKeyName),+
$(MAXIMUM_ALLOWED),+
IE_KeyNetcards
Ifstr $(IE_KeyNetcards) == $(KeyNull)
set RegistryErrorIndex = UNABLE_OPEN_NETWORKCARD_SECTION
goto FatalRegistry
endif
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
; Compare all the NetworkCards entries to see whether
; they match the current bus number, slot number, title,
; and product name.
Debug-Output "IE_KeyNameList ="$(IE_KeyNameList)
ForListDo $(IE_KeyNameList)
set IE_KeyName = *($($),1)
OpenRegKey +
$(IE_KeyNetcards),+
"",+
$(IE_KeyName),+
$(MAXIMUM_ALLOWED),+
IE_Card
Debug-Output "IE_Card = "$(IE_Card)
Ifstr $(IE_Card) == $(KeyNull)
set RegistryErrorIndex = UNABLE_OPEN_NETWORKCARD_SECTION
goto FatalRegistry
endif
GetRegValue $(IE_Card),"Description", DescriptionInfo
GetRegValue $(IE_Card),"ProductName", ProductNameInfo
set CardDescription = *($(DescriptionInfo), 4)
set CardProductName = *($(ProductNameInfo), 4)
Debug-Output "CardDescription = "$(CardDescription)
Debug-Output "ProductHardwareDescription = "$(ProductHardwareDescription)
Debug-Output "CardProductName = "$(CardProductName)
Debug-Output "ProductHardwareName = "$(ProductHardwareName)
ifstr(i) $(CardProductName) == $(ProductHardwareName)
; The product type matches. Now check for a
; match on bus number and slot number.
GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
Set ServiceName = *($(ServiceNameInfo), 4)
Debug-Output "ServiceName ="$(ServiceName)
OpenRegKey +
$(!REG_H_LOCAL),+
"",+
"SYSTEM\CurrentControlSet\Services\"$(ServiceName)"\Parameters",+
$(MAXIMUM_ALLOWED),+
IE_KeyService
Ifstr $(IE_KeyService) == $(KeyNull)
set RegistryErrorIndex = UNABLE_OPEN_NETWORKCARD_SECTION
goto FatalRegistry
endif
; We are now in the parameters key for the adapter
; to which we are comparing the current adapter
GetRegValue $(IE_KeyService), "BusNumber", BusInfo
set CardBusNum = *($(BusInfo), 4)
GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
set CardSlotNum = *($(SlotInfo), 4)
Debug-Output "CardBusNum ="$(CardBusNum)
Debug-Output "BusNumber ="$(BusNumber)
ifint $(CardBusNum) == $(BusNumber)
ifint $(CardSlotNum) == $(SlotNumber)
Set AlreadyInstalled = "YES"
endif
endif
endif
EndForListDo
ifstr(i) $(AlreadyInstalled) == "YES"
goto NextAdapter
endif
; -------------------------------------------------
; The netcard has not yet been installed. Add
; it now.
; -------------------------------------------------
; Determine the CardId parameter first, as well as the ProductHardwareTitle.
; The latter parameter is only used in installation mode.
ifint $(NetcardId) == $(PIT_ADAPTER_ID)
set ProductHardwareTitle = $(TRP_TITLE)
set CardId = $(PIT_ADAPTER_ID)
endif
SetINFDefaults =+
; The following sections is used during a new installation and by
; the configure adapter section to determine the default values for
; parameters.
;
; Parameters needed:
;
; AdapterBusType REG_VT_DWORD 5 (1=ISA,3=MCA,5=PCI,8=PCMCIA)
; BusNumber REG_VT_DWORD ---> (set by PCI autodetect logic)
; BusType REG_VT_DWORD 5 (1=ISA,3=MCA,5=PCI,8=PCMCIA)
; CardId REG_VT_DWORD *
; DataRate REG_VT_SZ AUTO (AUTO,M16,M4)
; EnableTxEofInt REG_VT_SZ YES (YES,NO)
; FullDuplex REG_VT_SZ YES (YES,NO)
; LLCOnly REG_VT_SZ YES (YES,NO)
; LoopBack REG_VT_SZ NO (YES,NO)
; MaxTransmits REG_VT_DWORD 31 (1-128)
; MaxTxFrameSize REG_VT_DWORD 4096 (14-18000)
; MediaType REG_VT_DWORD 2 (1=Ethernet,2=Token Ring)
; MinRcvBuffs REG_VT_DWORD 40 (1-200)
; NetAddress REG_VT_SZ ** (12 digit valid LAA MAC address)
; RcvBuffSize REG_VT_DWORD 4096 (256-18000)
; SlotNumber REG_VT_DWORD ---> (set by PCI autodetect logic)
; SMP_Mode REG_VT_SZ *** (YES,NO)
; TraceQuiet REG_VT_SZ **** (YES,NO)
; TxPriMax REG_VT_DWORD 6 (0-6)
; TxPriThresh REG_VT_DWORD 1 (1-6)
;
; * CardId is dependant on the actual card installed. Look in
; the file constant section for hints.
;
; ** NetAddress must be a valid LAA, that is, between 400000000000 and
; 7FFFFFFFFFFF hexidecimal.
;
; *** SMP_Mode is set to yes if the workstation has at least two
; processors.
;
; **** Needed only for NDIS 3.1 drivers, set in FillInValueList shell
; section.
;
; Set default values for first time install. This will set the default
; configuration for adapters that are being installed for the first time.
; The user can then bring up the properties for the adapter to configure the
; adapter after this has been done.
; If this driver can support SMP, do it. (Workstation must be running
; Windows NT 4.0 and have at least two processors).
ifstr(i) $(hasSMP) == "YES"
set SMP_Mode = "YES"
else
set SMP_Mode = "NO"
endif
; Set the rest of the parameters
set AdapterBusType = "5" ; PCI
set BusType = "5" ; PCI
set DataRate = "AUTO"
set EnableTxEofInt = "YES"
set FullDuplex = "YES"
set LLCOnly = "YES"
set LoopBack = "NO"
set MaxTransmits = "31"
set MaxTxFrameSize = "4096"
set MediaType = "2" ; 802.5 Token Ring
set MinRcvBuffs = "40"
set NetAddress = ""
set RcvBuffSize = "4096"
set TxPriMax = "6"
set TxPriThresh = "1"
ifstr(i) $(hasRNIC) == "YES"
set SecondaryInstance = $(RNIC_Not)
set RNICStatus = 0
endif
; The above section is called from Configure mode to reset common
; defaults for the driver. If called from configure, jump back to
; configuration section.
ifstr(i) $(!NTN_InstallMode) == Configure
goto AfterSetINFDefaults
endif
; Create the Hardware Component
Shell $(UtilityInf), AddHardwareComponent, +
$(ProductHardwareName),+
$(STF_CONTEXTINFNAME),+
$(CurrentProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Debug-Output "ProductKeyName ="$(CurrentProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto FatalRegistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
Set AdapterNumber = $($R4)
Debug-Output "HardNetCardkey = "$(HardNetCardKey)
Debug-Output "HardNetRuleKey = "$(HardNetRuleKey)
Debug-Output "HardParameterKey = "$(HardParameterKey)
Debug-Output "AdapterNumber = "$(AdapterNumber)
Debug-Output "NetcardId = "$(NetcardId)
Debug-Output "SlotNumber = "$(SlotNumber)
; Here's where we set the pretty name of the driver.
set MyTitle = "["$(AdapterNumber)"] "$(ProductHardwareTitle)
Debug-Output "MyTitle = "$(MyTitle)
Set MyService = $(ProductSoftwareName)$(AdapterNumber)
Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(CurrentManufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(MyTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "NewValueList = "$(NewValueList)
Debug-Output "HardNetCardKey = "$(HardNetCardKey)
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output $(NewValueList)
Debug-Output "TempProdName ="$(TempProdName)
Debug-Output "HardNetRuleKey ="$(HardNetRuleKey)
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Shell "",FillInNewValueList
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set NewValueList = $($R0)
Debug-Output "NewValueList = "$(NewValueList)
Debug-Output "HardParameterKey = "$(HardParameterKey)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell "" ,AddDefaultNetCardParameters,$(HardParameterKey)
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
NextAdapter = +
EndForListDo
LastAdapter = +
EndWait
goto successful
; -----------------------------------------------------------------
; ConfigureAdapter - Entry point for configuration mode
; -----------------------------------------------------------------
ConfigureAdapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetCardKey
ifstr(i) $(NetCardKey) == ""
set CommonStatus = STATUS_USERCANCEL
goto successful
endif
GetRegValue $(NetCardKey) "ServiceName" ServiceInfo
set ServiceName = *($(ServiceInfo),4)
GetRegValue $(NetCardKey) "Title" TitleInfo
set MyTitle = *($(TitleInfo),4)
CloseRegKey $(NetCardKey)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
ifstr(i) $(ParamKey) == ""
goto successful
endif
; Before going any further: is this adapter a secondary adapter
; in an RNIC situation? If so, stop the user from configuring
; anything and display a nice message.
GetRegValue $(ParamKey) "RNICStatus" RNICValue
set RNICStatus = *($(RNICValue), 4)
ifint $(RNICStatus) == "2"
; The adapter is secondary. Tell the user, then gracefully exit.
set Error = "Secondary adapters in a redundant NIC relationship cannot be configured."
set to = UnsupportedAction
set from = UnsupportedAction
goto UnsupportedAction
endif
; Set defaults for anything that can be changed in the GUI
; in case they aren't in the registry already.
goto SetINFDefaults ;(in install section above)
AfterSetINFDefaults = +
; Initialize ParmList
set ParmList = "OptionID="$(Option)",MyTitle="$(MyTitle)",hasSMP="$(hasSMP)",MSS="$(hasMSS)",DriverFile="$(DriverFile)",InstanceName="$(ServiceName)",HasRNIC="$(hasRNIC)
; Read from the registry and override defaults with values we find
; there.
EnumRegValue $(ParamKey) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set Key = *($(ValueItem),1)
set Value = *($(ValueItem),4)
ifstr(i) $(Key) == "AdapterBusType"
set AdapterBusType = $(Value)
else-ifstr(i) $(Key) == "BusNumber"
set BusNumber = $(Value)
else-ifstr(i) $(Key) == "BusType"
set BusType = $(Value)
else-ifstr(i) $(Key) == "CardId"
set CardId = $(Value)
else-ifstr(i) $(Key) == "DataRate"
set DataRate = $(Value)
else-ifstr(i) $(Key) == "EnableTxEofInt"
set EnableTxEofInt = $(Value)
else-ifstr(i) $(Key) == "FullDuplex"
set FullDuplex = $(Value)
else-ifstr(i) $(Key) == "LLCOnly"
set LLCOnly = $(Value)
else-ifstr(i) $(Key) == "LoopBack"
set LoopBack = $(Value)
else-ifstr(i) $(Key) == "MaxTransmits"
set MaxTransmits = $(Value)
else-ifstr(i) $(Key) == "MaxTxFrameSize"
set MaxTxFrameSize = $(Value)
else-ifstr(i) $(Key) == "MediaType"
set MediaType = $(Value)
else-ifstr(i) $(Key) == "MinRcvBuffs"
set MinRcvBuffs = $(Value)
else-ifstr(i) $(Key) == "NetAddress"
set NetAddress = $(Value)
else-ifstr(i) $(Key) == "RcvBuffSize"
set RcvBuffSize = $(Value)
else-ifstr(i) $(Key) == "RNICStatus"
set RNICStatus = $(Value)
else-ifstr(i) $(Key) == "SecondaryBusNumber"
set SecondaryBusNumber = $(Value)
else-ifstr(i) $(Key) == "SecondaryInstance"
set SecondaryInstance = $(Value)
else-ifstr(i) $(Key) == "SecondarySlotNumber"
set SecondarySlotNumber = $(Value)
else-ifstr(i) $(Key) == "SlotNumber"
set SlotNumber = $(Value)
else-ifstr(i) $(Key) == "SMP_Mode"
set SMP_Mode = $(Value)
else-ifstr(i) $(Key) == "TxPriMax"
set TxPriMax = $(Value)
else-ifstr(i) $(Key) == "TxPriThresh"
set TxPriThresh = $(Value)
endif
EndForListDo
; Finish setting up the rest of the ParmList
set ParmList = $(ParmList)",AdapterBusType="$(AdapterBusType)
set ParmList = $(ParmList)",BusNumber="$(BusNumber)
set ParmList = $(ParmList)",BusType="$(BusType)
set ParmList = $(ParmList)",CardId="$(CardId)
set ParmList = $(ParmList)",DataRate="$(DataRate)
set ParmList = $(ParmList)",EnableTxEofInt="$(EnableTxEofInt)
set ParmList = $(ParmList)",FullDuplex="$(FullDuplex)
set ParmList = $(ParmList)",LLCOnly="$(LLCOnly)
set ParmList = $(ParmList)",LoopBack="$(LoopBack)
set ParmList = $(ParmList)",MaxTransmits="$(MaxTransmits)
set ParmList = $(ParmList)",MaxTxFrameSize="$(MaxTxFrameSize)
set ParmList = $(ParmList)",MediaType="$(MediaType)
set ParmList = $(ParmList)",MinRcvBuffs="$(MinRcvBuffs)
set ParmList = $(ParmList)",NetAddress="$(NetAddress)
set ParmList = $(ParmList)",RcvBuffSize="$(RcvBuffSize)
set ParmList = $(ParmList)",RNICStatus="$(RNICStatus)
set ParmList = $(ParmList)",SecondaryBusNumber="$(SecondaryBusNumber)
set ParmList = $(ParmList)",SecondaryInstance="$(SecondaryInstance)
set ParmList = $(ParmList)",SecondarySlotNumber="$(SecondarySlotNumber)
set ParmList = $(ParmList)",SlotNumber="$(SlotNumber)
set ParmList = $(ParmList)",SMP_Mode="$(SMP_Mode)
set ParmList = $(ParmList)",TxPriMax="$(TxPriMax)
set ParmList = $(ParmList)",TxPriThresh="$(TxPriThresh)
Debug-Output "ParmList ="$(ParmList)
; Save the value of "RNICStatus" and "SecondaryInstance" for checking later.
set Old_RNICStatus = $(RNICStatus)
set Old_SecondaryInstance = $(SecondaryInstance)
Debug-Output "RNICStatus = "$(RNICStatus)" Old_RNICStatus = "$(Old_RNICStatus)
Debug-Output "SecondaryInstance = "$(SecondaryInstance)" Old_SecondaryInstance = "$(Old_SecondaryInstance)
; Load the tokstp2 DLL and bring up the GUI
LoadLibrary "X" $(InstallDLL) hDLL
LibraryProcedure Result $(hDLL) InstallTokenRing $(ParmList)
FreeLibrary $(hDLL)
; Extract parameters from result string. We are only interested in
; the parameters that are changable from tokstp2
Split-String $(Result) "," ResultList
ForListDo $(ResultList)
Set Token = $($)
ifstr $(Token) != ","
Split-String $(Token) "=" KeyEqualsValue
Set Key = *($(KeyEqualsValue), 1)
Set Value = *($(KeyEqualsValue), 3)
ifstr $(Key) == "STATUS"
ifstr $(Value) != "OK"
Set CommonStatus = STATUS_USERCANCEL
Debug-Output "Cancel button pressed in InstallTokenRing()"
goto end
endif
else-ifstr $(Key) == "AdapterBusType"
set AdapterBusType = $(Value)
else-ifstr $(Key) == "BusNumber"
set BusNumber = $(Value)
else-ifstr $(Key) == "BusType"
set BusType = $(Value)
else-ifstr $(Key) == "CardId"
set CardId = $(Value)
else-ifstr $(Key) == "DataRate"
set DataRate = $(Value)
else-ifstr $(Key) == "EnableTxEofInt"
set EnableTxEofInt = $(Value)
else-ifstr $(Key) == "FullDuplex"
set FullDuplex = $(Value)
else-ifstr $(Key) == "LLCOnly"
set LLCOnly = $(Value)
else-ifstr $(Key) == "LoopBack"
set LoopBack = $(Value)
else-ifstr $(Key) == "MaxTransmits"
set MaxTransmits = $(Value)
else-ifstr $(Key) == "MaxTxFrameSize"
set MaxTxFrameSize = $(Value)
else-ifstr $(Key) == "MediaType"
set MediaType = $(Value)
else-ifstr $(Key) == "MinRcvBuffs"
set MinRcvBuffs = $(Value)
else-ifstr $(Key) == "NetAddress"
set NetAddress = $(Value)
else-ifstr $(Key) == "RcvBuffSize"
set RcvBuffSize = $(Value)
else-ifstr $(Key) == "RNICStatus"
set RNICStatus = $(Value)
else-ifstr $(Key) == "SecondaryBusNumber"
set SecondaryBusNumber = $(Value)
else-ifstr $(Key) == "SecondaryInstance"
set SecondaryInstance = $(Value)
else-ifstr $(Key) == "SecondarySlotNumber"
set SecondarySlotNumber = $(Value)
else-ifstr $(Key) == "SlotNumber"
set SlotNumber = $(Value)
else-ifstr $(Key) == "SMP_Mode"
set SMP_Mode = $(Value)
else-ifstr $(Key) == "TxPriMax"
set TxPriMax = $(Value)
else-ifstr $(Key) == "TxPriThresh"
set TxPriThresh = $(Value)
endif
endif
EndForListDo
; Remove the parameters & rebuild the parameters based on user input
EnumRegValue $(ParamKey) OldValueList
ForListDo $(OldValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
; Don't remove CoS 4 IP and RTSW Parms!
ifcontains(i) $(ValueName) not-in { +
"RTSWMode", +
"RTSWEnable", +
"RTSWHoldingTime", +
"RTSWSubnetMask", +
"RTSWTableSize", +
"TCPPortRange1", +
"TCPPortRange2", +
"TCPPortRange3", +
"TCPPortRange4", +
"TCPPortRange5", +
"UDPPortRange1", +
"UDPPortRange2", +
"UDPPortRange3", +
"UDPPortRange4", +
"UDPPortRange5" +
}
DeleteRegValue $(ParamKey) $(ValueName)
endif
EndForListDo
; Build the new value list.
Shell "",FillInNewValueList
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set NewValueList = $($R0)
Debug-Output $(NewValueList)
Shell $(UtilityInf), AddValueList, $(ParamKey), $(NewValueList)
; RNIC Setup (NetRules/Internal Bookkeeping)
; CASE 1: If this is a new primary adapter in an RNIC situation, we need to
; do the following:
;
; (1a) find the secondary adapter's Parameter Key registry Handle,
; add the "RNICStatus" value to the parameter list and set
; it to "2"
;
; (1b) find the secondary adapter's NetRules Key registry Handle and
; remove the "type" value
; CASE 2: If this is a old primary adapter whose backup adapter has switched,
; then we need to do the following:
;
; (2a) find the old secondary adapter's Parameter Key registry Handle,
; change the "RNICStatus" value to "0"
;
; (2b) find the new secondary adapter's Parameter Key registry Handle,
; add the "RNICStatus" value to the parameter list and set
; it to "2"
;
; (2c) find the old secondary adapter's NetRules Key registry Handle and
; replace the "type" value
;
; (2d) find the secondary adapter's NetRules Key registry Handle and
; remove the "type" value
; CASE 3: Similarly, if this adapter was a primary, but is no longer a primary
; adapter, it's secondary must be fixed according to (2a) and (2b).
; Determine the cases here. Check to see if the Secondary instance changed.
ifstr $(SecondaryInstance) != $(Old_SecondaryInstance)
; We need to get the hardware base key for the secondary adapter, if we have
; a secondary adapter. In order to do this, we need the adapter number of the
; secondary adapter. We'll get this by splitting the secondary adapter
; instance string by using "P" as the delimiter (I know...this is ugly --sgp).
; So, if the instance string is "IBMTRPx", Split-String will return
; {"IBMTR","P","x"}. We'll then use the last element in the list as the end of
; the RegBase key "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\x\NetRules"
ifstr $(SecondaryInstance) != $(RNIC_Not)
Split-String $(SecondaryInstance) "P" HackedUp
set SecondNum = *($(HackedUp), 3)
Debug-Output "SecondNum = "$(SecondNum)
endif
ifstr $(Old_SecondaryInstance) != $(RNIC_Not)
Split-String $(Old_SecondaryInstance) "P" HackedUp
set Old_SecondNum = *($(HackedUp), 3)
Debug-Output "Old_SecondNum = "$(Old_SecondNum)
endif
; Set up some "informational strings"
set PrimaryString = $(ProductHardwareDescription)" [Redundant NIC primary adapter, "$(SecondaryInstance)" acting as secondary]"
set SecondaryString = $(ProductHardwareDescription)" [Redundant NIC secondary adapter]"
ifint $(RNICStatus) == 1
ifint $(Old_RNICStatus) == 0
; CASE 1: RNICStatus 0 >> 1 (New RNIC Setup)
Debug-Output "RNIC Case 1 -- New RNIC Setup)"
; (1a) Open the secondary adapter's parameter key
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(SecondaryInstance)"\Parameters" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Change the RNICStatus key to 2 (secondary)
set NewValueList = {RNICStatus,0,$(!REG_VT_DWORD),2}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
; (1b) Open the secondary adapter's NetRules key
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(SecondNum)"\NetRules" $(MAXIMUM_ALLOWED) TempKey
Debug-Output $(!NTN_RegBase)"\NetRules"
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Delete the type value
DeleteRegValue $(TempKey) type
CloseRegKey $(TempKey)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(PrimaryString)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(SecondNum) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(SecondaryString)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
else-ifint $(Old_RNICStatus) == 1
; CASE 2: RNICStatus 1 >> 1 (Changed backup adapters)
Debug-Output "RNIC Case 2 -- Existing RNIC Setup, Changed Secondary adapters"
; (2a) Open the old secondary adapter's parameter key
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(Old_SecondaryInstance)"\Parameters" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Change the RNICStatus key to 0 (eligible)
set NewValueList = {RNICStatus,0,$(!REG_VT_DWORD),0}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
; (2b) Open the secondary adapter's parameter key
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(SecondaryInstance)"\Parameters" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Change the RNICStatus key to 2 (secondary)
set NewValueList = {RNICStatus,0,$(!REG_VT_DWORD),2}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
; (2c) Open the old secondary adapter's NetRules key
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Old_SecondNum)"\NetRules" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Replace the type value
set NewValueList = {type,0,$(!REG_VT_SZ),$(NetRuleHardwareType)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
; (2d) Open the secondary adapter's NetRules key
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(SecondNum)"\NetRules" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Delete the type value
DeleteRegValue $(TempKey) type
CloseRegKey $(TempKey)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(PrimaryString)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(SecondNum) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(SecondaryString)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Old_SecondNum) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(ProductHardwareDescription)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
endif
else-ifint $(RNICStatus) == 0
ifint $(Old_RNICStatus) == 1
; CASE 3: RNICStatus 1 >> 0 (Removed adapters from RNIC status)
Debug-Output "RNIC Case 3 -- RNIC Dissolution"
; (3a) Open the secondary adapter's parameter key
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(Old_SecondaryInstance)"\Parameters" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Change the RNICStatus key to 0 (eligible)
set NewValueList = {RNICStatus,0,$(!REG_VT_DWORD),0}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
; (3b) Open the secondary adapter's NetRules key
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Old_SecondNum)"\NetRules" $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
; Replace the type value
set NewValueList = {type,0,$(!REG_VT_SZ),$(NetRuleHardwareType)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
; Set up some informational strings
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(ProductHardwareDescription)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Old_SecondNum) $(MAXIMUM_ALLOWED) TempKey
ifstr(i) $(TempKey) == ""
goto fatal
endif
set NewValueList = {Description,0,$(!REG_VT_SZ),$(ProductHardwareDescription)}
SetRegValue $(TempKey) $(NewValueList)
CloseRegKey $(TempKey)
endif
endif
; Finally, since the RNIC stuff changed, we need to initiate another bindings review.
; Setting CommonStatus to "STATUS_REBIND" should do the trick.
set CommonStatus = STATUS_REBIND
endif
goto successful
BindingAdapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
RemoveAdapter = +
; Find our parameter key
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetCardKey
ifstr(i) $(NetCardKey) == ""
goto FatalRegistry
endif
GetRegValue $(NetCardKey) "ServiceName" ServiceInfo
set ServiceName = *($(ServiceInfo),4)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
ifstr(i) $(ParamKey) == ""
goto FatalRegistry
endif
; Before going any further: is this adapter currently in an
; RNIC situation? If so, stop the user from configuring
; anything and display a nice message.
GetRegValue $(ParamKey) "RNICStatus" RNICValue
set RNICStatus = *($(RNICValue), 4)
ifint $(RNICStatus) == "1"
; The adapter is in a RNIC relationship, and it's a primary adapter. Tell the user, then gracefully exit.
set Error = "Removing the primary adapter in a redundant NIC pair is not supported. To uninstall this adapter, you must enter the Redundant NIC properties for this adapter and change the secondary adapter to 'Redundant NIC Disabled'. After doing this, you will be allowed to remove the adapter."
set to = UnsupportedAction
set from = UnsupportedAction
goto UnsupportedAction
endif
ifint $(RNICStatus) == "2"
; The adapter is in a RNIC relationship, and it's a secondary adapter.
set Error = "Removing the secondary adapter in a redundant NIC pair is not supported. To uninstall this adapter, you must enter the Redundant NIC properties for the primary adapter in the redundant NIC pair and change the secondary adapter to 'Redundant NIC Disabled'. After doing this, you will be allowed to remove the adapter."
set to = UnsupportedAction
set from = UnsupportedAction
goto UnsupportedAction
endif
CloseRegKey $(ParamKey)
CloseRegKey $(NetCardKey)
Debug-Output "Removing adapter components..."
Ifstr(i) $(CurrentProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, +
$(CurrentManufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, +
$(CurrentManufacturer), +
$(ProductSoftwareName), +
$(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
endif
goto end
UpgradeSoftware = +
Debug-Output "Entering Upgrade Software Section..."
set KeyProduct = ""
OpenRegKey $(!REG_H_LOCAL) "" $(CurrentProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr(i) $(KeyProduct) != $(KeyNull)
Debug-Output "Beginning upgrade of software component "$(KeyProduct)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
Debug-Output "Finished upgrade of software component "$(KeyProduct)
else
Debug-Output = "ACK! Can't find software component to upgrade...bailing out!"
goto fatalregistry
endif
goto end
UnsupportedAction = +
Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set CommonStatus = STATUS_USERCANCEL
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(CurrentManufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(CurrentManufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
endif
goto end
warning = +
Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
NonFatalInfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto NonFatalMsg
nonfatal = +
Set Severity = NONFATAL
goto NonFatalMsg
NonFatalMsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
FatalRegistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
exit
term = +
Return $(CommonStatus)
;---------------------------------------------------------------------
; Files sections
[Files-NDIS4MP]
1, IBMTRP.N4_, SIZE=66000, RENAME=IBMTRP.SYS
[Files-NDIS3MP]
1, IBMTRP.N3_, SIZE=66000, RENAME=IBMTRP.SYS
[Files-Support]
1, TOKSTP2.DL_, SIZE=120000, RENAME=TOKSTP2.DLL, OVERWRITE=VERIFYSOURCEOLDER
1, TOKSTP2.HL_, SIZE=20000, RENAME=TOKSTP2.HLP, OVERWRITE=VERIFYSOURCEOLDER
1, TOKSTP2.CN_, SIZE=1000, RENAME=TOKSTP2.CNT, OVERWRITE=VERIFYSOURCEOLDER
1, IBMSGNET.DL_, SIZE=1900, RENAME=IBMSGNET.DLL, OVERWRITE=VERIFYSOURCEOLDER
[Files-INF]
1, OEMSETUP.INF, SIZE=71000, RENAME=$(!UG_Filename)
;---------------------------------------------------------------------
; Installation Sections
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(NDIS_Level) == $(NDIS4_Level)
; WinNT 4.x
AddSectionFilesToCopyList Files-NDIS4MP $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
else
; assume WinNT 3.51
AddSectionFilesToCopyList Files-NDIS3MP $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
AddSectionFilesToCopyList Files-Support $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
ifstr(i) $(NDIS_Level) == $(NDIS4_Level)
; WinNT 4.x
AddSectionFilesToCopyList Files-NDIS4MP $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
else
; assume WinNT 3.51
AddSectionFilesToCopyList Files-NDIS3MP $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
AddSectionFilesToCopyList Files-Support $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-INF $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;---------------------------------------------------------------------
; Shell sections used during installation
[AddDefaultNetCardParameters]
; This section of code reads values out of the unattended install
; answer file, if any parameters exist. Answer file keywords
; are CASE SENSITIVE and will override any defaults which may
; have been already set in the INF, so be careful!
set KeyParameter = $($0)
ForListDo $(!NetCardParameterName)
set Name = $($)
set Value = *($(!NetCardParameterValue), $(#))
ifcontains(i) $(Name) in { +
"NetAddress", +
"LoopBack", +
"FullDuplex", +
"DataRate", +
"EnableTxEofInt", +
"LLCOnly", +
"SMP_Mode", +
"RTSWMode", +
"RTSWEnable", +
"RTSWSubnetMask", +
"TCPPortRange1", +
"TCPPortRange2", +
"TCPPortRange3", +
"TCPPortRange4", +
"TCPPortRange5", +
"UDPPortRange1", +
"UDPPortRange2", +
"UDPPortRange3", +
"UDPPortRange4", +
"UDPPortRange5" +
}
set Type = $(!REG_VT_SZ)
else
set Type = $(!REG_VT_DWORD)
endif
Debug-Output "** Unattended Install: Answer File Parm Name = "$(Name)" with value = "$(Value)
SetRegValue $(KeyParameter) {$(Name),0,$(Type),$(Value)}
EndForListDo
Return
[FillInNewValueList]
; Build the new value list.
Set NewValueList = {}
Set List = {AdapterBusType,0,$(!REG_VT_DWORD),$(!P:AdapterBusType)}
Set NewValueList = >($(NewValueList),$(List))
ifstr $(!P:BusNumber) != ""
Set List = {BusNumber,0,$(!REG_VT_DWORD),$(!P:BusNumber)}
Set NewValueList = >($(NewValueList),$(List))
endif
Set List = {BusType,0,$(!REG_VT_DWORD),$(!P:BusType)}
Set NewValueList = >($(NewValueList),$(List))
Set List = {CardId,0,$(!REG_VT_DWORD),$(!P:CardId)}
Set NewValueList = >($(NewValueList),$(List))
ifstr $(!P:DataRate) != ""
Set List = {DataRate,0,$(!REG_VT_SZ),$(!P:DataRate)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:EnableTxEofInt) != ""
Set List = {EnableTxEofInt,0,$(!REG_VT_SZ),$(!P:EnableTxEofInt)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:FullDuplex) != ""
Set List = {FullDuplex,0,$(!REG_VT_SZ),$(!P:FullDuplex)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:LLCOnly) != ""
Set List = {LLCOnly,0,$(!REG_VT_SZ),$(!P:LLCOnly)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:LoopBack) != ""
Set List = {LoopBack,0,$(!REG_VT_SZ),$(!P:LoopBack)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifint $(!P:MaxTransmits) != ""
Set List = {MaxTransmits,0,$(!REG_VT_DWORD),$(!P:MaxTransmits)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifint $(!P:MaxTxFrameSize) != ""
Set List = {MaxTxFrameSize,0,$(!REG_VT_DWORD),$(!P:MaxTxFrameSize)}
Set NewValueList = >($(NewValueList),$(List))
endif
Set List = {MediaType,0,$(!REG_VT_DWORD),$(!P:MediaType)}
Set NewValueList = >($(NewValueList),$(List))
ifint $(!P:MinRcvBuffs) != ""
Set List = {MinRcvBuffs,0,$(!REG_VT_DWORD),$(!P:MinRcvBuffs)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:NetAddress) != ""
Set List = {NetAddress,0,$(!REG_VT_SZ),$(!P:NetAddress)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifint $(!P:RcvBuffSize) != ""
Set List = {RcvBuffSize,0,$(!REG_VT_DWORD),$(!P:RcvBuffSize)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifint $(!P:RNICStatus) != ""
Set List = {RNICStatus,0,$(!REG_VT_DWORD),$(!P:RNICStatus)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:SecondaryInstance) != "XXXXXX"
set List = {SecondaryBusNumber,0,$(!REG_VT_DWORD),$(!P:SecondaryBusNumber)}
set NewValueList = >($(NewValueList),$(List))
set List = {SecondarySlotNumber,0,$(!REG_VT_DWORD),$(!P:SecondarySlotNumber)}
set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:SecondaryInstance) != ""
ifstr $(!P:SecondaryInstance) != "XXXXXX"
set List = {SecondaryInstance,0,$(!REG_VT_SZ),$(!P:SecondaryInstance)}
set NewValueList = >($(NewValueList),$(List))
endif
endif
ifstr $(!P:SlotNumber) != ""
Set List = {SlotNumber,0,$(!REG_VT_DWORD),$(!P:SlotNumber)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifstr $(!P:SMP_Mode) != ""
Set List = {SMP_Mode,0,$(!REG_VT_SZ),$(!P:SMP_Mode)}
Set NewValueList = >($(NewValueList),$(List))
endif
Set List = {TraceHead,0,$(!REG_VT_DWORD),$(!P:TraceHead)}
Set NewValueList = >($(NewValueList),$(List))
ifint $(!P:TxPriMax) != ""
Set List = {TxPriMax,0,$(!REG_VT_DWORD),$(!P:TxPriMax)}
Set NewValueList = >($(NewValueList),$(List))
endif
ifint $(!P:TxPriThresh) != ""
Set List = {TxPriThresh,0,$(!REG_VT_DWORD),$(!P:TxPriThresh)}
Set NewValueList = >($(NewValueList),$(List))
endif
; NDIS 3.1 Only Stuff Here
;
ifstr(i) $(!P:NDIS_Level) == $(!P:NDIS3_Level)
set List = {TraceQuiet,0,$(!REG_VT_SZ),"YES"}
set NewValueList = >($(NewValueList),$(List))
endif
Debug-Output "FillInNewValueList returning: "$(NewValueList)
return $(NewValueList)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.