; ********************************************************************** ; * LTWAN462.INF ; * ; * G.992.2 DSL WAN (RFC2364) driver INF file for Lucent WildWire adapter ; * with Device ID = 0462 ; * ; * Copyright (c) 1999, All Rights Reserved, Lucent Technologies ; * ; ********************************************************************** [Version] LayoutFile=layout.inf,layout1.inf Signature="$CHICAGO$" Provider=%LT% Class=Net ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318} [Manufacturer] %LUCENT%=LUCENT [SourceDisksNames] 1=%DISK_NAME%,,1 [SourceDisksFiles] ltdslwan.sys=1 idsp1.e62=1 idsp2.e62=1 ;idsp1.a62=1 ;idsp2.a62=1 ;idsp1.962=1 ;idsp2.962=1 [LUCENT] %LTMF0462_DSL%=LTDSLWAN0462.ndi,MF\LTMF0462_DEV1 [LTDSLWAN0462.ndi] AddReg=LTDSLWAN0462.ndi.reg, LTDSLWAN.ndi.reg [LTDSLWAN0462.ndi.reg] HKR,Ndi,DeviceID,,MF\LTMF0462_DEV1 HKR,Ndi\Install,ndiswan,,"LTDSLWAN0462.ndiswan" [LTDSLWAN.ndi.reg] ; General parameters HKR,,BoardName,,%BoardName% ; ServiceName, if required by a particular provider (e.g. Bell Atlantic) ; could be installed via the INF by specifying it here ; HKR,,ServiceName,,%ServiceName% ; Driver Protocol Mode HKR,,Mode,,1 ; key,subkey,valuname,type,value HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,ltdslwan.sys HKR,Ndi,HelpText,0, %DslAdapterHelp% HKR,,EnumPropPages,,"netdi.dll,EnumPropPages" ; NDIS Info HKR,NDIS,MajorNdisVersion,1,04 HKR,NDIS,MinorNdisVersion,1,00 HKR,NDIS,LogDriverName,,"LTDSLWAN" ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"ndiswan" HKR,Ndi\Interfaces,DefLower,,"dsl" HKR,Ndi\Interfaces,UpperRange,,"ndiswan" HKR,Ndi\Interfaces,LowerRange,,"dsl" ;**************************************************************************** ; TAPI Configuration ;**************************************************************************** HKR,TAPI,Properties,1,00,00,00,00 HKR,TAPI,ConfigFlags,1,00,00,00,00 HKR,TAPI,DeviceCaps,1,14,00,00,00, 00,00,00,00, 00,00,00,00, 01,00,00,00, 00,00,00,00 HKR,TAPI\Line0,ConfigFlags,1,00,00,00,00 HKR,TAPI\Line0,LineCaps,1,1c,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 02,00,00,00, 01,00,00,00, 00,00,00,00 HKR,TAPI\Line0,Properties,1,00,00,00,00 00,00,00,00 00,00,00,00 HKR,TAPI\Line0\Channel0,ConfigFlags,1,00,00,00,00 HKR,TAPI\Line0\Channel0,Properties,1,00,00,00,00 00,00,00,00 00,00,00,00 HKR,TAPI\Line0\Channel0,ChannelCaps,1,00,00,00,00 HKR,TAPI\Line0\Channel0,SPID,,"" HKR,TAPI\Line0\Channel0,Phone,,"" ;params HKR,Ndi\params\AtmScrambling,ParamDesc,,%ATM_SCRAM% HKR,Ndi\params\AtmScrambling,default,,1 HKR,Ndi\params\AtmScrambling,type,,enum HKR,Ndi\params\AtmScrambling\enum,0,,%PARM_OFF% HKR,Ndi\params\AtmScrambling\enum,1,,%PARM_ON% HKR,Ndi\params\Configuration,ParamDesc,,%CONF_MODE% HKR,Ndi\params\Configuration,type,,enum HKR,Ndi\params\Configuration,default,,3 HKR,Ndi\params\Configuration\enum,1,,"ADI 910" ;HKR,Ndi\params\Configuration\enum,2,,"ADI 910 Heavy" HKR,Ndi\params\Configuration\enum,3,,"Alcatel" ;HKR,Ndi\params\Configuration\enum,4,,"Alcatel Heavy" HKR,Ndi\params\Configuration\enum,5,,"ADI 918" HKR,Ndi\params\DelayAfterTraining,ParamDesc,,%DEL_TRAIN% HKR,Ndi\params\DelayAfterTraining,default,,3 HKR,Ndi\params\DelayAfterTraining,min,,0 HKR,Ndi\params\DelayAfterTraining,max,,15 HKR,Ndi\params\DelayAfterTraining,step,,1 HKR,Ndi\params\DelayAfterTraining,base,,10 HKR,Ndi\params\DelayAfterTraining,type,,int HKR,Ndi\params\TransmissionMode,ParamDesc,,%TRANS_MODE% HKR,Ndi\params\TransmissionMode,type,,enum HKR,Ndi\params\TransmissionMode,default,,1 HKR,Ndi\params\TransmissionMode\enum,1,,"RFC2364 VC Mux" HKR,Ndi\params\TransmissionMode\enum,3,,"RFC2364 LLC" HKR,Ndi\params\TransmissionMode\enum,4,,%PPPOE% HKR,Ndi\params\VirtualPathID,ParamDesc,,%VPI% HKR,Ndi\params\VirtualPathID,default,,0 HKR,Ndi\params\VirtualPathID,min,,0 HKR,Ndi\params\VirtualPathID,max,,255 HKR,Ndi\params\VirtualPathID,base,,10 HKR,Ndi\params\VirtualPathID,type,,int HKR,Ndi\params\VirtualChannelID,ParamDesc,,%VCI% HKR,Ndi\params\VirtualChannelID,default,,33 HKR,Ndi\params\VirtualChannelID,min,,0 HKR,Ndi\params\VirtualChannelID,max,,65535 HKR,Ndi\params\VirtualChannelID,base,,10 HKR,Ndi\params\VirtualChannelID,type,,int ; Optional parameters for debugging ;#define DBG_COMP_INIT 0x00000001 ;#define DBG_COMP_SEND 0x00000002 ;#define DBG_COMP_RECV 0x00000004 ;#define DBG_COMP_REQUEST 0x00000008 ;#define DBG_COMP_UNLOAD 0x00000010 ;#define DBG_COMP_VC 0x00000040 ;#define DBG_COMP_HALT 0x00000080 ;#define DBG_COMP_INT 0x00000100 ;#define DBG_COMP_RESET 0x00000200 ;#define DBG_COMP_RS 0x00000800 // R-S debug ;#define DBG_COMP_ODT 0x00001000 ;#define DBG_COMP_TAPI 0x00002000 ;#define DBG_COMP_LINK 0x00004000 ;#define DBG_COMP_CONTENTS 0x00008000 // Contents of XMT and RCV data ;#define DBG_COMP_IDLE_CELL 0x00010000 // Prints Idle or Data Cell Received ;#define DBG_COMP_PKT_TIME 0x00020000 // Timestamp on received/xmit packets ;#define DBG_COMP_EOC 0x00040000 ;#define DBG_COMP_INTR_TIMES 0x00100000 // Debug for calculating the time spent ; // processing ISRs before getting to a DPC ;#define DBG_LTDISPATCH 0x00200000 HKR,Ndi\params\DebugSystems,ParamDesc,,%DEBUG_LEVEL% HKR,Ndi\params\DebugSystems,type,,dword HKR,Ndi\params\DebugSystems,base,,16 HKR,Ndi\params\DebugSystems,default,,000053C1 ; NDI Required Components HKR,Ndi\Compatibility,RequireAll,,"NDISWAN" [LTDSLWAN0462.ndiswan] CopyFiles=LTDSLWAN0462.ndiswan.CopyFiles [LTDSLWAN0462.ndiswan.CopyFiles] ltdslwan.sys,,,2 idsp1.e62,,,2 idsp2.e62,,,2 ;idsp1.a62,,,2 ;idsp2.a62,,,2 ;idsp1.962,,,2 ;idsp2.962,,,2 ;**************************************************************************** ; Destination Directories ;**************************************************************************** [DestinationDirs] DefaultDestDir = 11 ; LDID_SYS, C:\windows\system ; ; Translatable strings ; [Strings] LT = "Lucent Technologies" LUCENT = "Lucent Microelectronics" ; Same disk name as in the modem INF file DISK_NAME = "Lucent V90+DSL Installation Disk" ATM_SCRAM = "ATM Scrambling" CONF_MODE="Configuration" DEL_TRAIN = "Delay After Training" TRANS_MODE = "Transmission Mode" PPPOE="PPP over Ethernet" VPI = "Virtual Path ID (VPI)" VCI = "Virtual Channel ID (VCI)" DEBUG_LEVEL = "Debug System Level" PARM_ON = "On" PARM_OFF = "Off" ; Adapter names LTMF0462_DSL="Lucent DSL/WAN Adapter (ID=0462)" ; BoardName MUST be 36 or less characters long BoardName="WildWire DSL Adapter" ; Optional (if not required) ServiceName - BELOW IS AN EXAMPLE ONLY ; This is only used in PPP over Ethernet mode ; If specified, it must match exactly what's required by the service provider ; ServiceName="Bell Atlantic DSL Service" ; ; Help Text ; DslAdapterHelp="A Digital Subscriber Line (DSL) Adapter provides a high speed connection to the Internet or other remote network"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.