WIN95/README.TXT Driver File Contents (MB012TID.ZIP)

Driver Package File Name: MB012TID.ZIP
File Size: 574.0 KB

                                 Triones
             Bus Master EIDE/ATAPI Device Drivers for Intel PIIX
                               WINDOWS 95

                             Revision 3.70B
                           (December 12,1997)

#############################################################################

NOTE: 
    This Windows 95 driver dose not support CD-ROM Changers. If you have a
    ATAPI CD-ROM Changer installed in your system, please do not install
    this driver!

1   INSTALLATION
    1.  Insert the CD into the CD-ROM drive (i.e. D:).
    2.  Open "My Computer", double click "Drive D:".
    3.  Double click "Win95" in the \BMIDE directory.
    4.  Double click the Setup program.
    5.  Follow the instructions to install the driver.

    IMPORTANT NOTE:
    We have found that the Windows 95 OSR2 version would fail to load the
    driver on some systems using PIIX chipset after you install and
    restart the system. The following step could solve this problem if it
    happens:
    1.  Go to "My Computer" and double click "Control Panel".
    2.  Double click "System" then go to Device Manager and "View Devices by Type".
    3.  Go to hard disk controllers.
    4.  Double click Intel PIIX4 Bus Master IDE Controller (Ultra DMA supported)
        (there should be a yellow mark besides this instance).
    5.  Click "Resources" and you should see a box near the bottom of the screen
        that says "Set Configuration" manually.
    6.  Click on "Set Configuration" manually and you will see a check next
        to Use automatic setting.
    7.  Uncheck the box. When the system asks you to reboot, click "Yes".
    8.  After the system restarts, the yellow mark should be gone and your
        display in the Device Manager should look like this:
        Intel PIIX4 Bus Master IDE Controller (Ultra DMA supported)
        Primary IDE Contoller
        Secondary IDE Controller
    
2   DE-INSTALLATION
    1.  Insert the CD into the CD-ROM drive (i.e. D:).
    2.  Open "My Computer", double click "Drive D:".
    3.  Double click "Win95" in the \BMIDE directory.
    4.  Double click the Setup program.
    5.  Follow the instructions to de-install the driver.


server: web1, load: 0.75