README.TXT Driver File Contents (MB012TID.ZIP)

                                 Triones
             Bus Master EIDE/ATAPI Device Drivers for Intel PIIX
                               SCO UNIX 5.0
                              Revision 3.60a

                             (August 6,1997)

#############################################################################
Pre-installation Instruction

    1. Insert a formatted diskette into a floppy drive.
    2. Create a "\scounix" directory.
    3. Insert the provided CD into the CD-ROM drive.
    4. Copy TRISCO.TAR from the "BMIDE\SCOUNIX.50" directory contained
       in the CD to the "\scounix" directory in the floppy drive.
 

1   INSTALLATION
    1)  Install SCO UNIX 5.0 using the default SCO IDE driver.
    2)  Reboot your SCO UNIX system.
    3)  Insert Triones supplied diskette into the 3.5inch floppy drive of
        your system. Use doscp command to copy the file TRISCO.TAR to your
        /tmp directory.
        For example, if you are using floppy drive A, type:
            doscp  a:/scounix/trisco.tar /tmp/trisco.tar
    4)  From root directory, type the following commands:
            mkdir  /inst
            cd  /inst
            tar  xvf  /tmp/trisco.tar  .
        (NOTE: there is a period at the end of the last command.)
    5)  Install the driver by typing:
            ./install
    6)  Follow the steps and procedures (for control parameter configuration)
    7)  Reboot your SCO UNIX system.

2   DE-INSTALLATION
    1)  Change the directory to /inst.
    2)  Remove the driver by typing:
            ./remove

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.44