1. MB137LAN.ZIP Driver
2. README.TXT File Contents

README.TXT Driver File Contents (MB137LAN.ZIP)

****************************************************************************
		    Fast Ethernet Controller Provider Inc.
		       PCI 10/100 Fast Ethernet Adapter

			   SoftWare Driver Support
			   ~~~~~~~~~~~~~~~~~~~~~~~

	   Copyright (C) 1999 Fast Ethernet Controller Provider Inc.
			     All rights reserved.
****************************************************************************


Product Support
----------------
This release CD can be used for the following Fast Ethernet Controller
Provider Ethernet adapters:

                  FastNIC Adapter (ADMtek AN983B)



Install LAN driver
--------------------
Follow the step by step instructions to complete the installation.
drivers path : \NDIS5




LAN Diagnostic
----------------
    Run the diagnostic program found in the CD (\NDIS5\NICDIAG.EXE). If a problem 
    arises during the installation, contact your dealer or
    Fast Ethernet Controller Provider Inc. for support.



Conflict with Microsoft EMM386
------------------------------
  The PCI adapters can only function with the EMM386.exe memory manager
 program version 4.49 or later. You can verify its version number by 
 entering EMM386 at the DOS Prompt.

  Do not specify the "highscan" option with the EMM386.exe statement in your
 config.sys file, or your system will hang.

  If you run MEMMAKER and select Custom Setup, do not specify "Aggressively
 scan upper memory", or it will automatically insert the HIGHSCAN flag into
 the EMM386 command line. This parameter cannot be manually removed once
 it is installed, doing so will prevent the extended memory manager to
 function properly.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.