; ***** ALLEGRO ***** ;localization strings 100=ESS Aux 101=ESS CD-Audio 102=ESS Wavetable Synthesis 103=ESS Record 104=ESS Playback 105=ESS Mixer ;about mixer 106=20dB 107=Meter 108=Mute 109=Record Source 121=Volume Control 122=Vol 123=Recording Control 124=Rec 125=Line 126=CD 127=Aux 128=Video 129=Microphone 130=Phone-In 131=Mixer 132=Monomix 133=Synth 134=Wave 135=MonoOut 141=Line 2 142=CD 2 143=Aux 2 144=Video 2 145=Microphone 2 146=Phone-In 2 147=Mixer 2 148=Monomix 2 149=Dock Spkr 150=System Spkr 151=Power Management Enable 152=Level-1/Level-2 153=Mic-2 154=PC Speaker 155=PC Speaker 2 156=Docking Speaker ;-------------------------------------------------------------------------- ; In order to take advantage of the following features, you have to ; 1) take out the first column of ";" from each line you want to use. ; 2) change the right hand side value of "=" depending on need. ; 3) take out ";" from the line containing ;config.ini ; between [allegro] and 1:allegro.sys in file "oemsetup.inf". ; (Here, a line starting with ";" means it's commented out.) ;-------------------------------------------------------------------------- ; ; ** START MIXER CUSTOMIZATION for NORMAL/DOCK/UNDOCK States ** ; ; Values are Double Word based in reversed format, ; (eg. "03,02,01,00" is really 00010203 Hex) ; ; Bit 0 is for Dock (1 = Enable Control, 0 otherwise) ; Bit 1 is for UnDock (1 = Enable Control, 0 otherwise) ; ; Destination (Speaker, Headphone, etc.) SystemMic20DB=3 ; Undocked=YES, Docked=YES ;DockMic20DB=1 ; Undocked=NO, Docked=YES ; D11/D12 Power Management (2 = ENABLE, 0 = DISABLE) D11D12APM=0 ; Undocked=NO, Docked=NO ; System CODEC Source Map Output (CD, LINE, AUX, etc.) SystemCD_Out=3 ; Undocked=YES, Docked=YES SystemLINE_Out=3 ; Undocked=YES, Docked=YES SystemMIC_Out=3 ; Undocked=YES, Docked=YES ; System CODEC Source Map Input (CD, LINE, AUX, etc.) SystemCD_In=3 ; Undocked=YES, Docked=YES SystemLINE_In=3 ; Undocked=YES, Docked=YES SystemMIC_In=3 ; Undocked=YES, Docked=YES SystemMIXER_In=3 ; Undocked=YES, Docked=YES ; Docking CODEC Source Map Output (CD, LINE, AUX, etc.) DockCD_Out=1 ; Undocked=NO, Docked=YES DockLINE_Out=1 ; Undocked=NO, Docked=YES DockMIC_Out=0 ; Undocked=NO, Docked=YES ; Docking CODEC Source Map Input (CD, LINE, AUX, etc.) DockCD_In=1 ; Undocked=NO, Docked=YES DockLINE_In=1 ; Undocked=NO, Docked=YES DockMIC_In=1 ; Undocked=NO, Docked=YES DockMIXER_In=1 ; Undocked=NO, Docked=YES ; ; ** OTHER CUSTOMIZATIONS ** ; DetectDockingLineOut=1 SoftexAPM=1 ; 1/0 = enable/disable Softex Power Management Support enableHwVol=1 ;EnableAutoInstall=1 ; 1/0 = automatic/manual installation ;New_Laptop.Sys=1 ; 1/0 = New/Old Laptop.sys ("New" Laptop.sys means from Jan. 7, 1998 or later) ;Mic20dBOn=1 ; 1/0 = enable/disable Mic Volume 20dB boost ;enableMPU401=1 ; 1/0 = enable/disable MPU401 ; Change the first 0 to 1 to enable secondary AC97 line out detection ; Disable secondary AC97 line out detection ;Default2ndMic=0 ; 1/0 = default Mic is 2nd/1st Mic. ;DefaultPCSpeakerMute=0 ; 1/0 = default of PC Speaker is mute/unmute (* AC97 Codec ONLY *) ;EnableDockingAllinAllout=1 ; 1/0 = enable/disable All-in-All-out ;PCMOutValue=4 ; 0 - 8 ( 0=min, 8=max) ;DefaultMasterVol=A0A0 ; hex value (0000-FFFF)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.