* Driver Installation for Windows 98 SE
Note: This guide is intended as an installation guide for all of USB 2.0
Drivers. The snapshots and text may refer to the PCI to USB Enhanced Host
Controller, this is just used to simplify the guide. Depending upon your
hardware you could be seeing one of the following:
* Driver Installation Guide Format
This guide is laid out in four sections: Reinstalling Drivers for Windows 98 SE,
New Driver Installation for Windows 98 SE, Updating Drivers for Windows
98 SE, and Verifying Driver Installation for Windows 98 SE.
New Driver Installation for Windows 98 SE: Use these instructions if you already
have an USB 2.0 Controller installed in your system. Remember that the first time
you start your system after installing it, it may take longer due to the fact
that the operating system is locating and installing drivers for it.
Verifying Driver Installation for Windows 98 SE: Use these instructions to
verify successful driver installation on your system.
* New Driver Installation for Windows 98 SE
Use these instructions if you already have an USB 2.0 Controller installed; but
you do not have the USB 2.0 driver installed.
1. Windows will install the first OHCI (USB 1.1) controller. When the Add New
Hardware Wizard opens, click Next.
2. Select the option to search for the best driver for your device (Recommended)
and click Next.
3. Uncheck all options and click Next.
4. Select the option to install the updated driver (Recommended) and click Next.
5. You may see a message that Windows is searching for the driver. Click Next.
6. Insert your Windows 98 CD-ROM in your CD-ROM drive while you see the prompt
and click OK.
7. Type the drive letter for your CD-ROM drive in the Copy files from box and
click OK.
8. Click Finish to continue.
9. At this point, the driver for the first OHCI (USB 1.1) controller is installed.
To install the driver for the second OHCI controller, repeat steps 1 through 9.
10. The Add New Hardware Wizard will start again and attempt to install the EHCI
USB 2.0 drivers. Click Next.
11. Select the option to search for the best driver for your device (Recommended)
and click Next.
12. De-select all checkboxes and select the CD-ROM drive option, insert the ASUS
Support CD in your CD-ROM, and click Next.
13. Windows will show you the location of the driver. Click Next.
14. When Windows has finished copying files, click Finish.
* Verifying Driver Installation for Windows 98 SE
Use these instructions to verify successful driver installation on your system.
1. To verify that the driver is installed; right-click on the My Computer desktop
icon, select Properties, click the Device Manager tab, and then click on the
"+" (plus) sign next to Universal Serial Bus controllers to expand the list.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.