************************************************************ ************************************************************ * * Intel(R) Application Accelerator for Microsoft* Windows* * 98, Windows 98 Second Edition(SE), Windows Millennium * Edition(Me), Windows NT* 4.0, Windows 2000, and Windows * XP* Installation Readme * * This document makes references to products developed by * Intel. There are some restrictions on how these products * may be used, and what information may be disclosed to * others. Please read the Disclaimer section at the bottom * of this document, and contact your Intel field * representative if you would like more information. * ************************************************************ ************************************************************ ************************************************************ * Intel is making no claims of usability, efficacy or * warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained * herein completely defines the license and use of this * software. ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. Overview 2. System Requirements 3. Language Support 4. Installing the Software 5. Verifying Installation of the Software 6. Advanced Installation Instructions 7. Identifying the Software Version Number 8. Uninstalling the Software ************************************************************ * 1. OVERVIEW ************************************************************ The Intel(R) Application Accelerator is designed to improve performance of the storage sub-system and overall system performance. This software delivers improved performance through several ingredient technologies (components). Certain components will be available only on Pentium(R) 4 processor-based systems running Microsoft Windows 2000 and Windows XP. Software installation is flexible and fully automated for Microsoft Windows 98, Windows 98 Second Edition(SE), Windows Millennium Edition(Me), Windows NT 4.0, Windows 2000, and Windows XP operating systems. ************************************************************ * 2. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain the following Intel products: * Intel(R) Pentium(R) III or Pentium(R) 4 processor * Intel(R) 82801AA, 82801AB, 82801BA, 82801CAM, or 82801DB controllers 2. The kit software should be installed on systems with at least the minimum system memory required by the operating system. 3. Microsoft Windows 98, Windows 98 Second Edition(SE), Windows Millennium Edition(Me), Windows NT 4.0, Windows 2000, or Windows XP. 4. Installation of the Intel(R) Chipset Software Installation Utility prior to loading the Intel(R) Application Accelerator. ************************************************************ * 3. LANGUAGE SUPPORT ************************************************************ The following list contains the abbreviations of all languages into which the driver component of the Intel(R) Application Accelerator has been localized. You may have to refer to this section while using this document. ptb -> Brazilian Portuguese csy -> Czech dan -> Danish nld -> Dutch enu -> English fin -> Finnish fra -> French frc -> French Canadian deu -> German ell -> Greek hun -> Hungarian eng -> International English ita -> Italian jpn -> Japanese kor -> Korean chs -> Simplified Chinese nor -> Norwegian plk -> Polish ptg -> Portuguese rus -> Russian esp -> Spanish sve -> Swedish tha -> Thai cht -> Traditional Chinese trk -> Turkish ************************************************************ * 4. INSTALLING THE SOFTWARE ************************************************************ General Installation Notes: 1. The operating system and the Intel(R) Chipset Software Installation Utility must be installed on the system prior to installation. 2. Click on the self-extracting and self-installing setup file and answer all prompts presented. 3. You will be prompted to reboot when installation is complete. Note: By default, all general files (README.TXT, etc.) are copied to the path <bootdrive>:\Program Files\Intel\Intel Application Accelerator 4.1. INSTALLSHIELD* (AUTOMATED) INSTALL FROM HARD DRIVE OR CD-ROM 1. Download the Intel(R) Application Accelerator setup file and double-click to self-extract and to begin the setup process. 2. The Welcome window appears. Click on the Next button to continue. 3. The Software License Agreement window appears. If you agree to these terms, click on the Yes button and the drivers begins to install. 4. The Setup Complete window appears. Select "Yes, I want to restart my computer now" and click on the Finish button. 5. To verify if the driver has been loaded correctly, refer to Section 5. ************************************************************ * 5. VERIFYING INSTALLATION OF THE SOFTWARE ************************************************************ 1. The verification of the Intel(R) Application Accelerator is different on a per operating system basis. Please refer to the correct operating system subsection for details. A. Microsoft* Windows* 98, Windows 98 Second Edition, and Windows Millennium Edition * Run 'Start', 'Settings', then 'Control Panel' * Double-click 'System' Control Panel Application * Select the 'Device Manager' tab * Expand the 'Hard Disk Controllers' entry * Select the 'Intel 82801xx Ultra ATA Controller' listed, where xx in 82801xx represents the controller identified by the 'System Requirements' section of this document * Select the 'Properties' button * Select the 'Driver' tab * Select the 'Driver File Details' button * 'IntelATA.MPD' and 'Intelvsd.VXD' should be displayed B. Microsoft* Windows* NT* 4.0 * Run 'Start', 'Settings', then 'Control Panel' * Double-click 'SCSI Adapters' * Select the 'Devices' tab * 'IntelATA' or 'Intel Ultra ATA Controller' should be displayed C. Microsoft* Windows* 2000 * Run 'Start', 'Settings', then 'Control Panel' * Double-click 'System' Control Panel Application * Select the 'Hardware' tab * Select 'Device Manager' button * Expand the 'IDE ATA/ATAPI Controllers' entry * Right-click on the 'Intel 82801xx Ultra ATA Controller' listing, where xx in 82801xx represents the controller identified by the 'System Requirements' section of this document * Select 'Properties' * Select the 'Driver' tab * Select the 'Driver Details' button * 'IdeChnDr.SYS', IdeBusDr.SYS, and IPrtCnst.DLL should be displayed D. Microsoft* Windows* XP * Run 'Start' then 'Control Panel' * Double-click 'System' Control Panel Application * Select the 'Hardware' tab * Select 'Device Manager' button * Expand the 'IDE ATA/ATAPI Controllers' entry * Right-click on the 'Intel 82801xx Ultra ATA Controller' listing, where xx in 82801xx represents the controller identified by the 'System Requirements' section of this document * Select 'Properties' * Select the 'Driver' tab * Select the 'Driver Details' button * 'IdeChnDr.SYS', IdeBusDr.SYS, and IPrtCnst.DLL should be displayed ************************************************************ * 6. ADVANCED INSTALLATION INSTRUCTIONS ************************************************************ The following SETUP flags are available: -? Help information for the setup flags (shown below) -S Silent install (no user prompts) -B Forces a system reboot after installation -P <path> Supplies target installation path -A Extracts all driver files (does not install driver) to <path> if -P is also supplied, or the default directory otherwise -N Installs all components except driver -O <name> Supplies target Start Menu Program Folder name if installing Companion applet -L <number> Forces a particular language install (See the product documentation for a table mapping <number> to language) -build Displays build number -f2 <path\name> Creates a log file in <path> with <name>; this is to be used during silent installation. -noqfe Prevents Microsoft patch from being installed. The patch prevents a blue screen from occurring when attempting to play audio content from CDs in digital mode on Windows 98, Windows 98 SE, and Windows Me. *** "Package-for-the-web" requires that an additional -A be placed before any flag. Therefore, an example file extraction would be IATA_CD -A -A -P C:\<path> *** Notes: Flags and their parameters are not case-sensitive. Flags may be supplied in any order, with the exception of the -S and -L flags which must be supplied last. When using the -A flag, a target path may be specified via the -P flag, and the -O, -L, -S, and -N flags are ignored. When using the -P or -O flags, a space is required between the flag and the argument; when using -L and -f2, however, there should be no space. When using the -f2 flag, a log file name and path must be specified. To load just the driver as outlined in the Microsoft* document, "Deployment Guide Automating Windows NT Setup," use the supplied TXTSETUP.OEM file included in this package and insert the lines below into the UNATTEND.TXT file. This method is available for both Microsoft* Windows* NT* 4.0, Windows 2000, and Windows XP. (For Windows NT 4.0, the TXTSETUP.OEM, INTELATA.INF, and INTELATA.SYS file need to first be extracted from the compressed .CAB file. For Windows 2000 and Windows XP, the idechndr.inf, IdeBusDr.sys, idechndr.sys, and Txtsetup.oem files need to be extracted. To extract these files, run 'SETUP -A -P <path>' as described above.) Microsoft Windows NT 4.0: // Insert the lines below into the UNATTEND.TXT file [MassStorageDrivers] "Intel Ultra ATA Controller" = OEM [OEMBootFiles] INTELATA.INF INTELATA.SYS TXTSETUP.OEM Microsoft Windows 2000 and Windows XP: // Insert the lines below into the UNATTEND.TXT file [MassStorageDrivers] "Intel(R) 82801BA Ultra ATA Controller" = OEM "Primary IDE Channel" = OEM "Secondary IDE Channel" = OEM [OEMBootFiles] idechndr.inf IdeBusDr.sys IdeChnDr.sys Txtsetup.oem The IprtCnst.dll file must be placed in the following folder in your directory structure in order to be loaded during driver installation: C:\I386\$Oem$\$$\System32 Please refer to the following Microsoft Knowledge Base article for information on why the IprtCnst.dll file cannot be listed in the [OEMBootFiles] location in the unattend.txt file: http://support.microsoft.com/support/kb/articles/Q275 /3/34.ASP?LN=EN-US&SD=gn&FR=0&qry=Q275334&rnk=1&src= DHCS_MSPSS_gn_SRCH&SPR=CHS ************************************************************ * 7. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 1. The identification of the Intel(R) Application Accelerator software version number is different on a per operating system basis. Please refer to the correct operating system subsection for details. A. Microsoft* Windows* 98, Windows 98 Second Edition, and Windows Millennium Edition * Run 'Start', 'Settings', then 'Control Panel' * Double-click 'System' Control Panel Application * Select the 'Device Manager' tab * Expand the 'Hard Disk Controllers' entry * Select the 'Intel 82801xx Ultra ATA Controller' listed, where xx in 82801xx represents the controller identified by the 'System Requirements' section of this document * Select the 'Properties' button * Select the 'Driver' tab * Select the 'Driver File Details' button * Click on 'INTELATA.MPD' or 'INTELVSD.VXD' * The software version should be displayed after 'File Version:' B. Microsoft* Windows* 2000 * Run 'Start', 'Settings', then 'Control Panel' * Double-click 'System' Control Panel Application * Select the 'Hardware' tab * Select 'Device Manager' button * Expand the 'IDE ATA/ATAPI Controllers' entry * Right-click on the 'Intel 82801xx Ultra ATA Controller' listing, where xx in 82801xx represents the controller identified by the 'System Requirements' section of this document * Select 'Properties' * Select the 'Driver' tab * The software version should be displayed after 'Driver Version:' C. Microsoft* Windows* XP * Run 'Start' then 'Control Panel' * Double-click 'System' Control Panel Application * Select the 'Hardware' tab * Select 'Device Manager' button * Expand the 'IDE ATA/ATAPI Controllers' entry * Right-click on the 'Intel 82801xx Ultra ATA Controller' listing, where xx in 82801xx represents the controller identified by the 'System Requirements' section of this document * Select 'Properties' * Select the 'Driver' tab * The software version should be displayed after 'Driver Version:' ************************************************************ * 8. UNINSTALLING THE SOFTWARE ************************************************************ NOTE: This procedure assumes that the above installation process was successful. This un-installation procedure is specific only to the version of the software and installation file included in this package. 1. Click on the Start button. Open the Settings menu. Click on the Control Panel icon to open the Control Panel window. 2. Click on the Add/Remove programs icon. 3. Select Intel(R) Application Accelerator and click OK. 4. Click on Yes when the script prompts for confirmation. 5. The uninstall script will prompt you to restart the system. Uninstall procedure for Windows NT 4.0: NOTE: This procedure assumes that the above un-installation procedure is not applicable. 1. Click on the Start button. Open the Settings menu. Click on the Control Panel icon to open the Control Panel window. 2. Double click on the SCSI Adapters tab. 3. Select the Drivers tab. 4. Select 'Intel Ultra ATA Controller' and then select the Remove button. 5. Select the Add button and choose the default driver 'IDE CD-ROM (ATAPI 1.2)/Dual-Channel PCI IDE Controller'. 6. Choose OK and select Yes to restart your system. ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT * (OEM/IHV/ISV Distribution & Single User) ************************************************************ IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. Please Also Note: * If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV) this complete LICENSE AGREEMENT applies; * If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies. ------------------------------------------------------------ For OEMs, IHVs, and ISVs: LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not Licensed hereunder. Subject to the terms of this Agreement, Intel grants to You a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to: a) use, modify, and copy Software internally for Your own development and maintenance purposes; and b) modify, copy and distribute Software, including derivative works of the Software, to Your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single-User License Agreement, attached as Exhibit A; and c) modify, copy and distribute the end-user documentation that may accompany the Software, but only in association with the Software. If You are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then You may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation), to Your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease or in any other way transfer or disclose Software to any third party. You shall not reverse-compile, disassemble or otherwise reverse-engineer the Software. Except as expressly stated in this Agreement, no license or right is granted to You directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect Your relevant records to verify Your compliance with the terms and conditions of this Agreement. CONFIDENTIALITY. If You wish to have a third-party consultant or subcontractor ("Contractor") perform work on Your behalf that involves access to or use of Software, You shall obtain a written confidentiality agreement from the Contractor that contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose. Otherwise, You shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and by international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. ------------------------------------------------------------ EXHIBIT "A" INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, non-commercial use, and you may make one back-up copy of the Software, subject to these conditions: 1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel components is not licensed hereunder. 2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 3. You may not reverse-engineer, decompile or disassemble the Software. 4. You may not sublicense or permit simultaneous use of the Software by more than one user. 5. The Software may contain the software or other property of third-party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMISV1/RBK/January 21, 2000 ************************************************************ * DISCLAIMER ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ * Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. * Third-party brands and names are the property of their respective owners. Copyright (c) Intel Corporation, 1998-2002Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.