1. en2218.zip Driver
2. WFW311.TXT File Contents

WFW311.TXT Driver File Contents (en2218.zip)

	    Accton EN2218 Ethernet + Modem/Fax PC Card
    NDIS DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION
    ========================================================


  Contents:
  --------


      A) Install NDIS 3.0 driver for WFW 3.11



A) Install NDIS 3.0 driver for WFW 3.11

    The driver "PCM311.386" contained in directory
    \WFW311 conforms to the Network Driver Interface
    Specification (NDIS) 3.0 defined by Microsoft.

    The Ethernet + Modem/Fax PC CARD Adapter must be enabled by the enabler,
    ACC2218.EXE, before it can be used.  ACC2218.EXE should be added
    in the CONFIG.SYS file in the following format:

    DEVICE=C:\WINDOWS\ACC2218.EXE


    This statement should be added after the Card Service driver statement
    in CONFIG.SYS if that driver is used.

    ACC2218.EXE will give you lan and comport you wanted.

    NDIS 3.0 Driver Installation for Windows for Workgroups 3.11
    ------------------------------------------------------------

    1. Run Windows by typing WIN from the DOS prompt.
    2. Click the "Network" icon in the Main Program
       Group.
    3. Click the "Network Setup" icon from the Network window.
    4. Select "Networks" in the Network Setup window.
    5. Select "Install Microsoft Windows Network" from the Networks window.
    6. Select "Drivers" from the Network Setup window.
    7. Select "Add Adapter" item in the Option Dialog box.
    8. Select the "Unlisted or Updated Network Adapter" when the
       Install driver field appears.
    9. Type destination drive and path name in your PC.
   10. Make sure the full path of the directory (i.e. A:\)
       is given.
   11. Insert the PCMCIA Driver Diskette in your floppy drive
       and press <Enter> to start the installation process.
   12. When the "Accton EN2218 Ethernet + Fax/Modem PC CARD Adapter" dialog box appears,
       select the right interrupt number; I/O address and select "Close".

    ---------------------------------------------------------------------
    Note: For users to work lan and modem. Acc2218.exe is to enable lan and
    comport.This COMPORT must MEET lan interrupt number in Windows For
    Workgroup. in orther words You MUST select Lan IRQ to meet Comport setting,
    AND This driver( PCM311.386 ) only support IRQ3 and IRQ4.
    ---------------------------------------------------------------------
   Note:This should match the PCMCIA setting from card services or the
	direct enable.
	When you OK this setting you will probably get a warning dialog
	box saying that Interrupt X is associated with COMx etc.
	finally you are asked Do you wish to select a different setting?
	select NO.
    ---------------------------------------------------------------------

   13. Follow the on-screen instructions to complete the process.

    Sample Configuration Files
    --------------------------

    1. CONFIG.SYS File
       FILES=30
       BUFFERS=30
       LASTDRIVE=Z
       DEVICE=C:\WFW311\HIMEM.SYS
       DEVICE=C:\WFW311\ACC2218.EXE <-- PC CARD enabler
       DEVICE=C:\WFW311\IFSHLP.SYS
       STACKS=9,256

    2. AUTOEXEC.BAT File

       C:\WFW311\SMARTDRV.EXE
       C:\WFW311\net start
       PATH C:\WFW311;
       SET TEMP=C:\WFW311\TEMP

    3. OEMSETUP.INF File on Windows for Workgroups 3.11
       ;; Windows for Workgroups 3.11
       ;; OEMSETUP.INF
       ;; Copyright (c) Accton Technology Corporation, 1994

       [data]
       type=network
       version="3.11"

       [disks]
       1 =. ,"Accton EN2218 Ethernet + Fax/Modem PC CARD Driver Diskette", disk1

       [netcard]
       en2218="Accton EN2218 Ethernet + Fax/Modem PC CARD Adapter",0,ndis,ethernet,0x07,en2218,en2218_nif

       [en2218]
       ndis3=1:pcm311.386
       mlid=*:pcmmlid.com

       [en2218_nif]
       irq=INTERRUPT,,text,"3,4,5,9,10,11,12,15",5,0x38
       io=IOBASE,,text,"0x300,0x320,0x340,0x360","0x300",0x38


===End===