Accton EN2216 Ethernet PCMCIA Adapter
NDIS Driver for Microsoft Windows NT 3.5.1
========================================
The driver named ETHPCM.SYS is used with Microsoft Windows NT Release 3.5.1
The driver conforms to the Network Driver Interface Specification (NDIS) 3.0.
File Descriptions:
OEMSETUP.INF Device Information File for the EN2216 Adapter.
ETHPCM.SYS EN2216 Microsoft Windows NT device driver.
INSTALLATION PROCEDURE:
1) In the Main group of NT, select the Control Panel icon.
2) In the Control Panel window, select the Network icon.
3) In the Network Settings dialog box, select the Add Adapter button.
The Add Network Adapter dialog box appears.
4) In the list of network cards, select "<other> Requires disk from
manufacturer", and press the <Enter> button.
5) Insert the driver diskette in a diskette drive. Enter drive and
pathname (e.g. A:\NT351) and select the OK button.
6) In the Select OEM Option dialog box, you will see "Accton
PCMCIA-Series Adapter" in the menu. Use the OK button to install it.
7) Next, the Accton Network Card Setup dialog box appears.
You must specify the "IRQ level" and "I/O Port Address" of the
adapter.
8) The installation is now complete. Accton's adapter becomes one
of the Installed Adapter Cards and the driver becomes one of the
Installed Network Software. You can see "[0x]Accton PCMCIA-Series
Adapter" in the Installed Adapter Cards menu, and "Accton PCMCIA-Series
Adapter Driver" in the Installed Network Software menu.
9) The SETUP program has copied ETHPCM.SYS from the A:\NT351 directory
to C:\WINNT\SYSTEM32\DRIVERS, and the OEMSETUP.INF file from A:\NT351
to C:\WINNT\SYSTEM32; but renamed it to another installation information
file. The next time when you add the Accton's adapters to your system,
you do not need the driver diskette again.
10) To complete network installation, remember to bind the adapter to
transport drivers by selecting the "Bindings" button under the
"Network Setting" dialog box.
11) Restart the system to bring up the network.
Trademarks:
Microsoft Windows NT is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.