*******************************************************************
* ACCTON TECHNOLOGY CORPORATION *
* ACCTON EN1407-SX Cheetah Gigabit adapter *
* *
* Copyright (C) 1999 Accton Technology Corporation *
* All Rights Reserved. *
*******************************************************************
Accton EN1407-SX Cheetah Gigabit adapter General Description
EN1407-SX highly optimized features implements host offloading,
bus acceleration, and high-speed data transfer engines.These features
provdies the ideal NIC solution for high-speed network servers.
Accton EN1407-SX Cheetah Gigabit adapter features
10/100/1000Mbps Ethernet Implementation for a Cost Effective
Migration Path
Full and half-duplex operation
Packet Burst in half-duplex; Symmetric/asymmetric
full-duplex flow control
96KB embedded FIFO
32KB transmit (TX), 64KB receive (RX)
Eliminates need for external FIFO
Host Offloading via Chip-Level Internet Protocol (CLIP) and
Policy-Based Behavior
IPv4 checksum calculation
IP, TCP and UDP checksums supported
Packet filtering based on checksum errors
802.3ac and VLAN tag support
Supporting 16 entry VLAN tag TCI table
Filtering based on recognized VLANs
VLAN tag stripping on receive
Global and/or per packet VLAN tag insertion on transmit
Optimized Bus Transfer Operation
High-Speed PCI Interface
PCI 2.1 compliant
Efficient PCI master operation
33MHz, 32/64 bit operation
64 bit addressing
Supports dual address cycles
Additional Performance Features
Independent TX and RX engines
Robust Drivers and Management
Supporting software includes certified device drivers and
end user diagnostics
Windows NT 3.51, 4.0 and 5.0
Windows 95 OSR2
Windows 98
NetWare 3.12, 4.11 and 5.0
Support for the OnNow Initiative and PCI Power Management
Wake-on-LAN, Magic Packet
PCI PME Signal
Required elements of the 802.3 MIB
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.