Banyan VINES version 5.5 NDIS 2.0 Driver 1. Run the Accton Installation Program from Installation Disk. 2. Choose Banyan VINES from the Select Network Operating System screen. 3. Follow the prompts to complete the Accton segment of the installation. Note the IRQ value set by the Accton Installation Program for use in step 10 below. The Installation Program also creates a \VINE directory on your hard disk. 4. Copy the files form the VINES Master disk into the VINES directory. 5. Copy the NDIS driver files from \NDIS directory on the VINES LAN Drivers Disk into the VINES directory. 6. Change to the VINES directory. 7. Type PCCONFIG and select Network Card Settings, followed by NDIS Ethernet. 8. At the PROTOCOL.INI bindings prompt, type ACCTONNET. 9. Enter the IRQ value set by the Accton Installation Program (see step 3 above). 10. Press F10 to save and Esc to return to the main menu. 11. Select Login Environment Settings, followed by Default Communications Driver, followed by NDIS Ethernet. 12. Press Esc to return to the Main Menu and press F10 to save. 13. Reboot the PC. IBM LAN Support Program NDIS 2.0 Driver IBM Local Area Network Support Program (version 1.36) 1. Run the Accton Installation Program form Installation Disk. 2. Choose IBM LAN Support Program from the Select Network Operating System screen. 3. Follow the prompts to complete the Accton segment of the installation. 4. Install the IBM Local Area Network Support Program according to the instructions in the IBM Local Area Network Support Program User's Guide. 5. Under Environmnet Information, respond "no" to the question "Do you have adapter option disks?" 6. Choose an Accton Adapter from the list provided. 7. If prompted to do so, insert the Accton Network Drivers Disk when prompted and type the path A:\NDIS. 8. Press Esc twice to bypass error messages. 9. Continue with the installation until finished. 10. Use a text editor to add the following two lines in your CONFIG.SYS file at the location indicated by the "rem" statement concerning insertion of the driver name: DEVICE=\LSP\OPEN16.EXE DEVICE=\LSP\EN2226.EXE 11. Copy the file OPEN16.EXE and EN2226.EXE from the directory C:\ACCTON\2226 to the C:\LSP directory on your hard disk. 12. Use a text editor to edit the PROTOCOL.INI keyword settings in the C:\LSP directory to match the keywords contained in the sample PROTOCOL.INI file located at C:\ACCTON\2226 as required (unless you are using Accton EN2226 default settings). IBM Local Area Network Support Program (version 1.2) 1. Run the Accton Installation Program form Installation Disk. 2. Choose IBM LAN Support Program from the Select Network Operating System screen. 3. Follow the prompts to complete the Accton segment of the installation. 4. Install the IBM Local Area Network Support Program according to the instructions in the IBM Local Area Network Support Program User's Guide. The following instructions refer to the prompts and messages displayed with the Configuration Aid automated install software provided with the LAN Support Program. 5. If a message appears during the LAN Support Program installation indicating there are no IBM LAN adapters installed in the workstation, bypass the message by pressing Enter. 6. Answer [N]o to program support for the PC Network Adapter. 7. Answer [Y]es to use of programs needing the NETBIOS interface. 8. When prompted, select the Etherand Network family of network cards. 9. Continue with the installation until finished. 10. Use a text editor to replace the line in your CONFIG.SYS file that reads: DEVICE=\XX.DOS with tow lines DEVICE=\OPEN16.EXE DRIVER=NDIS DEVICE=\EN2226.EXE 11. Still in the CONFIG.SYS file, add the parameter O=N (where O is a letter, not zero) to the line DEVICE=\DXMT0MOD.SYS as follows DEVICE=\DXMT0MOD.SYS O=N 12. Copy the files OPEN16.EXE and EN2226.EXE from the directory C:\ACCTON\2226 to the root directory of your hard disk or boot disk. 13. Change to the LANMAN directory on your hard disk or boot disk. 14. Use a text editor to modify the PROTOCOL.INI file in the C:\LSP directory as follows: - Under the ETHERAND section, change the line that reads BINDINGS = TCMAC2 to BINDINGS = ACCTONNET - Underneath that section insert a new section that reads as follows: [ACCTONNET] DRIVERNAME = ACCTON$ 15. Use a text editor to edit the keyword settings in the PROTOCOL.INI file in the C:\LSP directory to match the keywords contained in the sample PROTOCOL.INI file located at C:\ACCTON\2226 as required (unless you are using Accton EN2226 default settings). 16. Save the file and reboot the PC. Microsoft LAN Manager NDIS 2.0 Driver Microsoft LAN Manager (version 2.1) 1. Run the Accton Installation Program from Installation Disk. 2. Choose Microsoft LAN Manager from the Select Network Operating System screen. 3. Follow the prompts to complete the Accton segment of the installation. 4. Begin installation of LAN Manager using "setup". 5. When prompted to select the available nework adapter driver, choose "Other Driver". 6. When prompted, insert the Accton Drivers Disk. 7. Select "Accton Fast EtherCard-16 10/100 PC Card" from the menu. 8. Continue with the installation until it is completed. 9. If installing Microsoft LAN Manager to run under Microsoft Windows proceed to step 10. Otherwise, skip to step 15. 10. Run Windows. 11. Choose setup from "main" group. 12. Select Startup, and under the "Options" screen select Change System Settings. 13. Select Network then scroll to LAN Manager version 2.1. 14. Follow the prompts to complete the installation. 15. Reboot the PC. Microsoft LAN Manager (version 2.1) with Windows for Workgroups 3.11 1. Run the Accton Installation Program from Installation Disk. 2. Choose Microsoft Windows for Workgroups from the Select Network Operating System screen. 3. Select "Yes" on the attached to Network File Server screen. 4. Select Microsoft LAN Manager. 5. Follow the prompts to complete the Accton segment of the installation. 6. Start Windows and, in the Network program group, double-click on the Network Setup icon. 7. If you have not installed network support, choose Networks in the Network Setup dialog box, select Install Microsoft Windows Network, and click OK. Otherwise proceed with step 8. 8. In the Network Setup dialog box, choose Drivers. 9. In the Network Drivers dialog box, choose Add Adapter. 10. In the Add Network Adapter box, choose Unlisted or Updated Network Adapter and click OK. 11. When prompted for an "unlisted, updated, or vendor-provided network driver disk," insert the Accton Drivers Disk. 12. Select "Accton Fast EtherCard-16 NDIS 2.01 Real Mode," and click OK. 13. Close the Network Drivers dialog box and click OK in the Network Setup box. 14. Complete the installation process, inserting the Accton Drivers Disk if required. 15. Continue with the installation until it is completed. 16. Click on the Control Panel in the "Main" group. 17. Select Startup from the Control Panel. 18. In the Options for Enterprise Networking window click "Log on to Windows NT or LAN Manager Domain." 19. Save, exit, and reboot the PC. SunSoft PC-NFS (version 3.5) NDIS 2.0 Drivr 1. Run the Accton Installation Program from Installation Disk. 2. Choose SunSoft PC-NFS from the Select Network Operating System screen. 3. Follow the prompts to complete the Accton segment of the installation. 4. Install PC-NFS for Ethernet according to instructions in the PC-NFS documentation. Choose NDIS setup, and follow the instructions to complete the setup. Note the prompt that tells you that further manual modifications will have to be made. 5. Reboot the computer. You will see some error messages. Disregard them and continue with these instructions. 6. Rename the file PROTOCOL.NFS in the C:\LANMAN directory to PROTOCOL.INI. Use an text editor to edit the PROTOCOL.INI file as follows: Replace the items [YOUR-MAC-MODULE] DRIVERNAME = YOURMAC$ OPTION1 = VALUE1 ETC. [NFS-NDIS] DRIVERNAME = NFSLINK1 BINDINGS = YOUR-MAC-MODULE with [ACCTONNET] DRIVERNAME = ACCTON$ [NFS-NDIS] DRIVERNAME = NFSLINK$ BINDINGS = ACCTONNET 7. Be sure the keyword settings in the PROTOCOL.INI file in the C:\LANMAN directory match the settings in the sample PROTOCOL.INI file contained in the C:\ACCTON\2226 directory. 8. Copy the files OPEN16.EXE AND EN2226.EXE from the C:\ACCTON\2226 directory to the C:\LANMAN directory. 9. Use a text editor to insert the following lines in your CONFIG.SYS file: DEVICE=C:\LANMAN\OPEN16.EXE DEVICE=C:\LANMAN\EN2226.EXE between the two lines DEVICE=C:\LANMAN\PROTMAN.SYS DEVICE=C:\LANMAN\NFS-NDIS.SYS as follows DEVICE=C:\LANMAN\PROTMAN.SYS DEVICE=C:\LANMAN\OPEN16.EXE DEVICE=C:\LANMAN\EN2226.EXE DEVICE=C:\LANMAN\NFS-NDIS.SYS 10. Verify that your AUTOEXEC.BAT file contains a line that reads C:\LANMAN\NETBIND before the line that reads NET INIT 11. Configure PC-NFS options according to your PC-NFS doucmentation, and reboot the computer. Windows for Workgroups 3.11 NDIS 2.0 Driver 1. Run the Accton Installation Program from Installation Disk. 2. Choose Microsoft Windows for Workgroups installation from the Select Network Operating System screen. 3. Choose "No" on the attached to Network File Servr screen. 4. Follow the prompts to complete the Accton segment of the installation. 5. Start Windows for Workgroups and double-click on the Network Setup icon in the Network Group. 6. If you have not installed network support, choose Networks in the Network Setup dialog box, select Install Micorsoft Windows Network, and click OK. Otherwise proceed to step 7. 7. In the Network Setup dialog box, choose Drivers. 8. In the Network Drivers dialog box, choose Add Adapter. 9. In the Add Adapter box, choose Unlisted or Updated Network Adapter and click OK. 10. When prompted for an "unlisted, updated, or vendor-provided network driver disk," insert the Accton Drivers Disk. 11. Select "Accton Fast EtherCard-16 NDIS 2.01 Real Mode" and click OK. 12. Close the Network Drivers dialog box and click OK in the Network Setup box. 13. Complete the installation process, inserting the Accton Drivers Disk if required.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.