Accton Technology Corporation EN1211 PCI FAST ETHERNET ADAPTER Netware Server Driver Installation Overview Copyright (C) 1997 by Accton Technology Corporation. All rights reserved. Contents: A.) File Description B.) Configuring EN1211 PCI Adapter Media Mode C.) Driver Installation for Netware Server 3.1x, 4.x D.) Parameters Description for EN1211.LAN A.) File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- SERVER.TXT This file. Presents a summary of the contents for Netware Server driver installation. EN1211.LAN Accton 32 Bits ODI Server driver for EN1211. This driver complies with Netware ODI Server driver SPEC 3.2. EN1211.LDI The driver (EN1211.LAN) installation information file for Netware Server 4.X, NeDOS32, Windows 3.x. ETHERTSM.NLM Netware Server 3.1X, 4.X LAN driver Topology Specific Module(TSM) for Ethernet. 3.1X\NBI31X.NLM Netware Server 3.1X Bus Interface module. 3.1X\MSM31X.NLM Netware Server 3.1X LAN driver Media Support Module(MSM). 4.X\NBI.NLM Netware Server 4.X Bus Interface module. 4.X\MSM.NLM Netware Server 4.X LAN driver Media Support Module(MSM). ------------------------------------------------------------------------------- B.) Configuring EN1211 PCI Adapter Media Mode Before Installing your ODI Driver, EN1211 adapter can be set in Full/Half Duplex mode.(Please reference SET1211.TXT) C.) Driver Installation for Netware Server 3.1x, 4.x C.1) Driver Installation for Netware Server 3.12 1.> Insert Accton EN1211 Driver Diskette to your PC's floppy drive (A: or B:). 2.> Change directory to Netware Server directory (for example: CD\SERVER.312) 3.> Copy the following files from Driver Diskette to Netware Server directory. \LANDRV32\3.1X\NBI31X.NLM \LANDRV32\3.1X\MSM31X.NLM \LANDRV32\ETHERTSM.NLM \LANDRV32\EN1211.LAN 4.> Sample AUTOEXEC.NCF for Netware Server 3.12 AUTOEXEC.NCF ============ LOAD C:NBI31X LOAD C:MSM31X LOAD C:ETHERTSM LOAD C:EN1211 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:EN1211 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:EN1211 FRAME=ETHERNET_II NAME=E_II LOAD C:EN1211 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 C.2) Driver Installation for Netware Server 4.X 1.> Change directory to Netware Server directory (for example: CD\NWSERVER ) 2.> Load Netware Server System by type SERVER, then press <Enter>. 3.> When the Server prompt appeared, load the Netware Server Installation Utility. That is, :LOAD INSTALL 4.> Select "Driver options" from "Installtion Options" menu, then press <Enter>. 5.> Select "Configure network drivers" from "Driver Options" menu, then press <Enter>. 6.> Select "Select a driver" from "Additional Driver Actions" menu, then press <Enter>. 7.> Press <Ins> to install a unlisted driver, then press <F3> to specify a different path. 8.> Insert Accton EN1211 Driver Diskette to your PC's floppy drive and specify the drive A:\LANDRV32 . 9.> Select "Accton EN1211 PCI Fast Ethernet Driver" from "Select a driver to installed:" menu, then press <Enter>. 10.> If necessary, select "Select/Modify driver parameters and protocols" from "Board EN1211_1 (Driver EN1211) Actions" menu, then press <Enter> to setup the driver parameters. (Please refer to content F.) Otherwise, select "Save parameters and load driver", then press <Enter>. 11.> Following instructions to complete the driver installation. 12.> Sample AUTOEXEC.NCF for Netware Server 4.X AUTOEXEC.NCF (one board) ======================== LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:EN1211 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:EN1211 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:EN1211 FRAME=ETHERNET_II NAME=E_II LOAD C:EN1211 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:EN1211 PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:EN1211 PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:EN1211 PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:EN1211 PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:EN1211 PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:EN1211 PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:EN1211 PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:EN1211 PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 D.) Parameters Description for EN1211.LAN The following parameters are used in EN1211.LAN. 1.> SLOT : specify which adapter is enabled when multiple EN1211 are found in your computer. The SLOT keyword is a index value corresponding to PCI BIOS. The mapping from SLOT to physical PCI slot is different from one machine to the other. Ex: LOAD EN1211 SLOT=3 FRAME=ETHERNET_802.2 LOAD EN1211 SLOT=4 FRAME=ETHERNET_II 2.> FRAME : specify which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Multiple frame types can be enabled by the drive by loading the same driver with different FRAME type. Ex: LOAD EN1211 FRAME=ETHERNET_802.2 LOAD EN1211 FRAME=ETHERNET_802.3 LOAD EN1211 FRAME=ETHERNET_II LOAD EN1211 FRAME=ETHERNET_SNAP 3.> NODE : Use a different address to replace the node address burned in EEPROM. Ex: LOAD EN1211 NODE=0200E8001122 --- All trademarks and brand names mentioned belong to their respective owners. -- End of File --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.