<=================================================================> < ACCTON TECHNOLOGY CORPORATION > < EN1211 PCI FAST ETHERNET ADAPTER > < NETWARE ODI DRIVER INSTALLATION > < > < Copyright (C) 1997 Accton Technology Corporation > < All Rights Reserved. > <=================================================================> Content of this document ======================== A. Configuring EN1211 PCI Adapter Media Mode B. DOS ODI WorkStation Driver Installation C. Installation Notes A. Configuring EN1211 PCI Adapter Media Mode =============================================== Before Installing your ODI Driver, EN1211 adapter can be set in Full/Half Duplex mode.(Please reference SET1211.TXT) B. NetWare DOS ODI Workstation Driver Installation ================================================== This section describes the procedure to install the NetWare workstation driver for your adapter. Requirements: ------------- Accton EN1211 Driver Diskette (EN1211.COM) Driver Location: \NETWARE\ODI\DOSODI Installation Procedure: ----------------------- Before you start with the installation process, make sure that the adapter is properly installed and configured. Make sure the your NetWare operating system is properly installed. 1. Run the following command in the order given below and press <Enter>: lsl EN1211 ipxodi netx (or vlm) 2. You can now log into your network. C. Installation Notes ===================== 1. Edit the NET.CFG if you want to change some parameters. For example, if you're using a NetWare 3.11 workstation and wants to log into a NetWare v4.X server. The default frame type of NetWare 3.11 is Ethernet 802.3, while that of NetWare v4.X is Ethernet 802.2. Before you can log into the NetWare v4.X , make sure there is a protocol binding for Ethernet 802.3 in the server's NET.CFG file. This is normally included in the [MLID] section. A sample NET.CFG file is given below: Link Driver EN1211 FRAME Ethernet_802.2 FRAME Ethernet_802.3 FRAME Ethernet_II FRAME Ethernet_SNAP PROTOCOL IPX 0 Ethernet_802.3 : --- All trademarks and brand names mentioned belong to their respective owners. -- THE END --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.