;; Windows for Workgroups 3.11 ;; OEMSETUP.INF [data] type=network version="3.11.060" autoexec_anchor="net start" config_anchor="" transport_hook=ms$ndishlp defNDIS2_transport=ms$netbeui defNDIS3_transport=ms$netbeui defNDIS3_transport2=ms$netbeui,ms$nwlinknb defODI_transport=ms$nwlinknb defNW_transport=ms$netbeui,ms$nwlinknb defNWipxmono_card=ms$nwsupnb defODI_arcnet_trans=ms$nwsupnbt [common] ; Protman Install and Protocol Sections [protman_install] netdir=8:protman.dos,8:protman.exe [protman] drivername=PROTMAN$ param=PRIORITY,,static,MS$NDISHLP ; NDIS3 manager [ndis3] device386=7:ndis.386 ; NDIS2 to NDIS3 mapper [ndis2macsup] device386=7:ndis2sup.386 ; ODI to NDIS3 mapper [odimacsup] device386=8:msodisup.386 netdir=8:odihlp.exe load=odihlp,@netdir\odihlp.exe,ipxodi,startnet ; trans exclusive to each other [trans_specific] transport=ms$nwlink,ms$nwlinknb ; NCD-detected values [ncd_card_specific] 243=TRANSCEIVER 301=IOCHRDY ; NCD-detected values [ncd_trans_specific] 101=MediaType [trans_update] transport=dis_pkt.gup [disks] z=.,"ISA Ethernet Driver",diskz [netcard] ; key = description, MSID, type, media, mode, install, protini, style wfw311="ISA Ethernet Driver",214,ndis,ethernet,0x07,wfw311,wfw311_nif [transport] ; key=description,MSID, type, transport, mode, install, protini, winnet type, style ms$ndishlp="NDIS2 Mapper",0,nonetbios,,0x01,0,implicit,ms$ndishlp,ms$ndishlp_xif ms$netbeui="Microsoft NetBEUI",3,ndis,netbeui,0x03,0,lanabase,ms$netbeui,ms$netbeui_xif,,0x0010 ms$nwlink="IPX/SPX Compatible Transport",104,nonetbios,nwlink,0x02,0,lanabase,ms$nwlink,ms$nwlink_xif,,0x0004 ms$nwlinknb="IPX/SPX Compatible Transport with NetBIOS",104,ndis,nwlink,0x02,0,lanabase,ms$nwlinknb,ms$nwlink_xif,,0x1004 ms$nwsupnbt="ODI ArcNet Support transport with NetBIOS",,ndis,,0x02,0,lanabase,ms$nwsupnb,ms$nwsup_nif,,0x100C ms$ipx="Novell IPX",101,nonetbios,ipx,0x01,0,implicit,ms$ipx,ms$ipx_xif,,0x8000 ms$ipx_tr="Novell IPX (Token Ring)",102,nonetbios,ipx,0x01,0,implicit,ms$ipx_tr,ms$ipx_tr_xif,,0x8000 ban$vines="Banyan VINES Protocol",4000,nonetbios,,0x01,0,implicit,ban$vines,ban$vines_xif,0x400 nfs-ndis="PC-NFS Protocol",0,ndis,,0x01,0,lanabase,ms$pcnfs,ms$pcnfs_xif,0x700 asybeui="RAS Transport",002,ndis,asybeui,0x01,0,lanabase,ms$asybeui,ms$asybeui_xif,,0x8000 ; ; Netcard Install and Protocol Sections ; [wfw311] ndis2=z:ethne.dos ndis3=z:acc311.386 mlid=z:nwmlid.com [wfw311_nif] drivername=ETHNE$ irq=INTERRUPT,,text,"3,4,5,9,10,11,12,15",3,0x28 io=IOBASE,,text,"0x300,0x320,0x340,0x360,0x200,0x220,0x240,0x260","0x300",0x28 ;ODIMAC stub [ms$odimac] mlid=x:xxxx [ms$odimac_nif] ; Generic NDIS2 [ms$genndis2] ndis2=*:genndis2.dos [ms$genndis2_nif] Drivername=GENNDIS2$ [ms$nwsupnb] ndis3=8:nwsup.386 ndis3=7:nwnblink.386 sysdir=*:vipx.386 secondnet=vipx.386,vipx.386 system.ini=Network,DirectHost,No,replace [ms$nwsup_nif] [asymac] ndis3=8:rasmac.386 windir=8:rasmon.exe windir=8:rasphone.exe windir=8:rasphone.hlp sysdir=8:rasapi16.dll sysdir=8:rascauth.dll sysdir=8:rasconf.dll sysdir=8:rasexe.exe sysdir=8:rasfile.dll sysdir=8:rasman.dll sysdir=8:rasmxs.dll sysdir=8:rassauth.dll sysdir=8:rasser.dll sysdir=8:rassrv.dll sysdir=8:modem.inf sysdir=8:pad.inf sysdir=8:switch.inf ;; Cleanup from RAS 1.0 devicesys=asymac.dos tsr=asybeui.exe tsr=vcommiod.exe tsr=wantsr.exe [asyncmac_nif] nwsdll=rasconf.dll ; Transport Install and Protocol Sections [ms$ndishlp] ndis2=8:ndishlp.sys [ms$ndishlp_xif] drivername=ndishlp$ [ms$netbeui] ndis2=x:*netbeui ndis3=7:netbeui.386 [ms$netbeui_xif] drivername=netbeui$ param=SESSIONS,"Maximum Sessions (real-mode)",int,"3,117,1",10 param=NCBS,"NCBS (real-mode)",int,"7,255,1",12 [ms$ipx] ;Standard IPX ndis2=$:msipx.sys netdir=$:msipx.com secondnet=vipx.386 load=msipx,@netdir\msipx,mscdex load=netx,@netdir\netx,route,msipx [ms$ipx_xif] DriverName=IPX$ ; NOTE: do not change the order of Ethernet_II, Novell/Ethernet. ; ncd_trans_specific relies on this ordering. param=MediaType,"Adapter Media Type",text,"Novell/Ethernet,'Ethernet_II (DIX)',","Novell/Ethernet" [ms$ipx_tr] ;TokenRing IPX install=ms$ipx netdir=$:route.com load=route,@netdir\route,msipx [ms$ipx_tr_xif] DriverName=IPX$ param=MediaType,"Adapter Media Type",static,"Token Ring",, [ms$asybeui] ndis2=$:asybeui.exe [ms$asybeui_xif] DriverName=netbeui$ [ban$vines] tsr=netbind tsr="net start" tsr="ban","ban /nc" tsr="ndisban","ndisban",ban tsr="redirall","redirall",ndisban netstart="net start","@netdir\net start",redirall load="arswait","arswait","net start" load="login","z:login",arswait [ban$vines_xif] DriverName=NDISBAN$ [ms$pcnfs] tsr=netbind ndis2=*:nfs-ndis.sys ndis2=*:pcnfs.sys,"/F30 /C^" ndis2=*:sockdrv.sys [ms$pcnfs_xif] DriverName=NFSLINK$ [ms$nwlink] ndis3=7:nwlink.386 secondnet=vipx.386 [ms$nwlinknb] ndis3=7:nwlink.386 ndis3=7:nwnblink.386 secondnet=vipx.386 ndis3sect=nwlink [ms$nwlink_xif] param=MAX_SOCKETS,"Maximum Sockets",int,"1,128,1",1,0x22 param=MAX_CONNECTIONS,"Maximum Connections",int,"1,128,1",1,0x22 param=SOURCE_ROUTING,"Source Routing Cache Size",int,"16,128,1",16,0x022 param=EVEN_PACKETS,"Force Even Length IPX Packets",enum,"Yes,1,No,0",0,0x022 param=FRAME,"Frame Type",text,"ETHERNET_802.2,ETHERNET_802.3,ETHERNET_II,TOKEN-RING",,0x22Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.