README.TXT FILE FOR TSENG LABS WINDOWS 95 DISPLAY DRIVER
Tseng Labs, Inc.
Tseng Labs Windows 95 Display Driver for ET6000 chip
(C) Copyright 1997. Tseng Labs, Inc.
All rights reserved.
______________________________________________
NOTE!
THE METHOD OF HANDLING INTERNAL DRIVER VERSION NUMBERS HAS BEEN CHANGED WITH RELEASE 6.
AS A RESULT, A PROBLEM WAS ENCOUNTERED WHICH WAS RECTIFIED BY CHANGING THE DRIVER FILE
NAMES. THE FILES , TSENGET6.DLL, TSENGET6.DRV, AND TSENGET6.VXD HAVE BEEN REPLACED WITH
TLIET600.DLL, TLIET600.DRV, TLIET600.VXD.
.DRIVER INFORMATION
Driver Name: Tseng Labs Windows 95 Display Driver for ET6000 chip
Driver Date: 4/24/97
Driver Release: 6
Driver Version: 4.03.4800
Driver Disk Contents:
TLIET600.DRV (GDI MiniDriver)
TLIET600.DLL (DirectDraw Driver)
TLIET600.VXD (Virtual Display MiniDriver)
TLIET600.INF (Win 95 Driver Installation File)
DISKT (Install Disk Marker File)
README.TXT (This file you are reading)
RELEASE.TXT (Specific Driver information for the current release)
SYSTEM REQUIREMENTS
Operating System: Windows 95 builds (950 , OSR2, OSR2.1, Memphis Beta)
Tseng Graphics chip support: ET6000
DRIVER INSTALLATION PROCEDURE
I. Installing from Hardware Auto-Detect, Hardware
Installation Wizard, or Display Property Settings
Page.
1. Open "Control Panel"
2. Open "Display"
3. Choose the "Settings" Tab
4. Select "Change Display Type"
5. In the "Adapter Type" section select "Change"
6. Select "Have Disk"
7. Browse to floppy drive where Driver Disk is.
8. Select "tliet600.inf" and click "OK"
9. In the "Select Device" window select "OK"
10. In the "Change Display Type" window select "Close"
11. Select "Apply" or "Close" and Restart
PROCEDURE TO CHANGE FROM THIS DRIVER BACK TO THE MICROSOFT VGA DRIVER
1. Open "Control Panel"
2. Open "Display"
3. Choose the "Settings" tab
4. Select "Change Display Type"
5. In the "Adapter Type" section select "Change"
6. Select "Show all devices"
7. Under "Manufacturers:" highlight "(Standard Display Types)"
8. Under "Models:" highlight "Super VGA"
9. In the "Select Device" window select "OK"
10. In the "Change Display Type" window select "Close"
11. Select "Apply" or "Close" and restart
NOTES
* For Specific Driver information, please read the
"release.txt" file on this driver distribution.
* This release is numbered 4.03.4800 externally, but its
internal version number is 4.03.00.4800. This was done
to be compliant with WHQL. Do not be concerned about
this difference. The last 4 digits are all that really
matter.
* This driver is compatible with ALL versions of Windows 95.
It is also compatible with DirectX versions 2,3 and 3a
DirectX 1.0 is no longer supported in this driver!
Please make sure that you have installed DirectX runtimes
2, 3 or 3a from Microsoft to ensure compatibility.
* DirectX setup programs don't necessarily install the
DirectVideo Dynamic Link Library (DLL) for
acceleration of programs which use the Video for
Windows(VFW) application interface. If you want
support for Video for Windows playback you should
install the DirectVideo/DirectX 3.0 setup package
available on Tseng Labs Web Page:
http://www.tseng.com/frames/download/directxv.exe
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.