1. en1208.zip Driver
2. PATHWORK.TXT File Contents

PATHWORK.TXT Driver File Contents (en1208.zip)

	   Accton EN1208 PCI Ethernet Adapter
	NDIS Driver for DEC PATHWORK Installation
	=========================================

The EN1208 driver in the \NDIS\DOS subdirectory of your
Driver Diskette conforms to the Network Driver Interface
Specification (NDIS) defined by Microsoft/3Com.

Installation Procedure
----------------------

1. Insert the DEC PATHWORKS Client Setup diskette #1
   into your floppy drive (either A: or B:).

2. Type the prompt, type the following and press <Enter>
   to bring up the startup menu:

   A:>NETSETUP		<Enter>

3. You'll be asked if your keyboard type is LK250. Select
   "NO" If you are using an LK250 keyboard choose "YES"

4. Next, you'll be prompted to choose a transport option.
   Select the "DECNET transport option" and press <Enter>
   to proceed.

5. Your system will prompt you to insert the DNET TRNSPRT diskette#1
   into your floppy drive. Follow screen instructions.

6. Then you'll be prompted to specify a destination drive.
   Type C: or D:

7. When asked if you are creating an initial workstation diskette,
   select "NO."

8. Type in the node name and address (i.e., node number) in the
   corresponding field. Then press <Enter>.

9. Type in the server node name and address (i.e., node number)
   in the corresponding field. Then press <Enter>.

10. When asked to "Select the network adapter type:" choose
    Ethernet.

11. When prompted to "Select the network adapter:" choose
    "Other NDIS."

12. Indicate the subdirectory location of your NDIS
    driver in the Driver Diskette. For example,
    type the following:

    A:\NDIS\DOS\EN1208.DOS
    or
    A:\MSLANMAN.DOS\DRIVERS\ACCTON\EN1208\EN1208.DOS

13. When prompted, indicate the subdirectory location
    of the PROTOCOL.INI file in the Driver Diskette.
    For example, type the following:

    A:\NDIS\DOS\
    or
    A:\MSLANMAN.DOS\DRIVERS\ACCTON\EN1208\

14. Select "WRITE KEY DISK" to save the settings that you have
    chosen. When prompted to copy the EN1208.DOS and PROTOCOL.INI
    files, insert the Driver Diskette into your floppy drive.

15. Follow screen instructions to complete the installation.

16. From the Configuration screen, press F10 to exit to C:\.


Sample Configuration Files
--------------------------

1. CONFIG.SYS File

   shell=c:\command.com /P /E:526
   device=c:\decnet\hiMEM.sys
   REM	device=C:\dos\EMM386.EXE ram 1024  ;;do not add EMM386.exe
   Rem	this driver
   dos=high, UMB
   devicehigh=c:\decnet\protman.sys /I:c:\DECNET
   devicehigh=c:\decnet\EN1208.dos
   rem device=c:\decnet\nddrv.sys
   rem device=c:\decnet\npdrv.sys
   FILES=50
   BUFFERS=50
   LASTDRIVE=v
   STACKS=9,256


2. PROTOCOL.INI file for PATHWORKS v4.1

   ; PROTOCOL.INI file create by DNETOMO.V41 V4.1.060
   ;		  via DNETWIK.V41 V4.1.047

   [protocol manager]
   DRIVERNAME = PROTMAN$

   [IPX4MAC]
   DRIVER = IPX$MAC
   BINDINGS   = EN1208.DOS

   [DATALINK]
   DRIVERNAME	= DLL$MAC
   LG_BUFFERS	= 16
   SM_BUFFERS	= 6
   OUTSTANDING	= 32
   HEURISTICS	= 0
   BINDINGS   = EN1208.DOS
   ;Specify IRQ level used by workstations network adapter
   ;NI_IRQ     = 3

   [EN1208.DOS]
   ; PROTOCOL.INI for Accton EN1208 PCI Ethernet Adapter
     drivername = EN1208$
     Slot = 1

3. AUTOEXEC.BAT

   echo off
   break on
   cls
   prompt $p$g
   REM Insert any keyboard internationalization and character set
   REM information here.
   if not exist \decnet\STARTNET.BAT goto nostartup
   call \decnet\STARTNET
   goto end
   :nostartup
   echo ** WARNING ** STARTNET.BAT file not found.  Network functions
   echo not performed

---
All trademarks or brand names mentioned are properties of their respective
companies.


--- End of this File ---