1. en1208.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (en1208.zip)

			Accton Technology Corporation
		Netware Client32 Driver Installation Overview
		=============================================



Contents:
	A.) File Description
	B.) Driver Installation for DOS32
	C.) Driver Installation for Microsoft Windows 3.x
	D.) Driver Installation for Microsoft Windows 95


A.) File Description
--------------------

-------------------------------------------------------------------------------
Filename	Description
-------------------------------------------------------------------------------
README.TXT	This file. Presents a summary of the contents for
		Netware Client32 driver installation.

1208ODI.LAN	Client32 ODI driver for Accton 10Mbps PCI Bus Ethernet Adapter.
		This driver complies with Netware ODI Server driver SPEC 3.3.

1208ODI.LDI	The driver (1208ODI.LAN) installation information file for
		Netware Server 4.11, DOS32, Microsoft Windows 3.x.

1208ODI.INF	The driver (1208ODI.LAN) installation information file for
		Microsoft Windows 95.

-------------------------------------------------------------------------------

B.) Driver Installation for DOS32

    1.> If you have completed installed the Netware Client 32 for DOS,
	all you have to do is to modify STARTNET.BAT.  Please see the
	sample STARTNET.BAT below.
	if not, Please follow the next step 2 - step 7.

    Sample STARTNET.BAT is as follow:

SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
C:

    2.> Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware
	4.11 CD). When the product manual appears,  mark the
	"Netware Client 32 for DOS" item, then press <Enter>.

    3.> Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
	then press <Enter>.

    4.> select "USER SPECIFIED 32 BIT DRIVER."         press <Enter>.

    5.> Insert Accton 10Mbps PCI Bus Ethernet Adapter Driver Diskette
	into your floppy diskette drive, then specify
	the driver path like A: or B:.

    6.> Following instructions to complete the Client32 for DOS software
	installation.

    7.> Reboot your machine.


C.) Driver Installation for Microsoft Windows 3.x

    Please refer to Content B.), in step 2, mark "Netware Client 32 for DOS"
    and "Client 32 for Windows"; in step 5, specify the driver path like
    A:\LANDRV32 or B:\LANDRV32. then following step 3..7
    to complete the installation.


D.) Driver Installation for Microsoft Windows 95

    If you have installed the Microsoft Client in your Windows 95 system,
    you should remove the adapter object and NDIS 2/3 driver of the
    adapter from the Windows 95 system.  If you have installed previously
    Accton 10Mbps PCI Bus Ethernet Adapter NDIS 2/3 driver,
    you should do the following steps before installing
    the Accton 10Mbps PCI Bus Ethernet Adapter Client32 driver.


    D.1) Remove the previously installed adapter object & driver of
	 Accton 10Mbps PCI Bus Ethernet Adapter, if any.
     ==============================================================
     1.> Click the "My Computer" icon in the Main Program Group.
     2.> Click the "Control Panel" icon from My Computer window.
     3.> Click the "System" icon from the Control Panel window.
     4.> Click the "Network adapter" icon from System window.
     5.> Click the "Accton 10Mbps PCI Bus Ethernet Adapter"
	 icon from System window.
     6.> Click <Remove> button, then click <OK> button.
     7.> Close the opened windows.



    D.2) Client 32 Driver Installation on Windows 95
     ===============================================

     8.> Plug Accton 10Mbps PCI Bus Ethernet adapter onto one
	 of the PCI slots of your PC machine.
     9.> Turn the power on to bootup the Windows 95.
    10.> Windows 95 will then prompt the "Accton 10Mbps PCI Bus
	 Ethernet Adapter " in New Hardware Found dialog box.
    11.> Following instructions to complete the installation.

	 Note: Windows 95 will ask you to key in the proper path of
	       the following diskette:

	    a.> Netware Client 32 for Windows 95 Disk,
	    b.> PCI-Bus Ethernet Adapter Driver Diskette
		--> Insert Driver Diskette,
		then, assign the path to A:\LANDRV32 or B:\LANDRV32
	    c.> Windows 95 CD-ROM

-- End of File --