This directory contains three files:
1. README_D.TXT
2. QUICKSET.EXE
3. PSCONFIG.EXE
README_D.TXT is used to explain how to use QUICKSET and PSCONFIG to
install and manage your print servers. It is also used to
provide release notes for newer versions of your print server
and its utilities.
QUICKSET.EXE is an express setup program that configures the
print server with default settings. For more information, please quit
browsing this file and type QUICKSET [Enter].
PSCONFIG.EXE
PSCONFIG is a menu-driven utility that provides some equivalent functions as
those found in WPCONFIG. To use this program, simply copy it from the
CD to any hard drive and run it under the DOS prompt.
PSCONFIG.EXE lets you to install your print server using PCONSOLE.
When finished with PSCONFIG, use PSCONFIG to inform print server to login
to the file server.
***** How to use Quickset.Exe to Setup your print server *******
1.Connect print cables and network cable to your print server.
If using installing the MIO model, insert it into your HP printer/plotter
and connect the network cable to your MIO print server.
2.Connect power adapter to your print server to power it up
or If installing the MIO model, power up the HP printer with
MIO print server plugged in.
3.Turn on or reboot your workstation and Login to the file server with
supervisory rights.
4.Insert the utility CD into your PC. Assume that it is
inserted into drive d:.
5.Execute QUICKSET.EXE.
Log on to drive b:, to configure your device to be print server,
type
QUICKSET SCnnnnnn [Enter]
where SCnnnnnn is the default unit name recorded on the bar code label
on the back of the print server case or on the
MIO print server board. A status message will appear on the screen. If Quickset
is successful, your print server is installed with default
configuration, and ready to service queues P1, P2 and SP, where P1 is for
parallel port 1, P2 is for parallel port 2 and SP is for serial port.
If Quickset is unsuccessful, a message will appear to inform you with
possible reasons and actions to take.
To configure your device to be remote printer, type
QUICKSET SCnnnnnn X
Where X is the name of the print server to be logged in.
print server will be configured as remote printer(s) to service queues
P1, P2 and SP attached by X.
6.With the following command, you can send a file to the parallel port 1
of your print server.
NPRINT your_file_name /Q=P1 /NB /NT /NOTI
7.With the following command, you can send a file to the parallel port 2
of your print server that has parallel port 2.
NPRINT your_file_name /Q=P2 /NB /NT /NOTI
8.With the following command, you can send a file to the serial port
of your print server that has serial port.
NPRINT your_file_name /Q=SP /NB /NT /NOTI
[HOW TO USE TRACE LOG]
psconfig.exe S F D xxxx.log [password]
xxxx.log log file name
without xxxx.log ,default is trace.log
without correct password ,log file will be encrypted.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.