;*********************************************************************** ; ; OEMSETNT.INF ; ; Version : 1.10 ; ; Olicom MCA/ISA Ethernet 10/100 Adapter Driver Setup File. ; ;*********************************************************************** ;----------------------------------------------------------------------- ; OPTION TYPE ; ----------- ; This identifies the Option type we are dealing with. The different ; possible types are: ; ; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ... ; ; Types specific to networking: ; ; NetAdapter, a netcard / adapter combination or just a netcard ; NetDriver, just a netcard driver ; NetTransport, a complete NDIS-compliant TDI transport stack ; NetService, an NT networking service ; NetWork, a complete network ensemble. ; NetProvider a complete network which supports NT MPR protocol ;----------------------------------------------------------------------- [Identification] OptionType = NetAdapter ;----------------------------------------------------------------------- ; PlatformsSupported ; ------------------ ; This identifies the platforms supported by the adapter card. ; Possible types are: ; ; ISA and EISA ;----------------------------------------------------------------------- [PlatformsSupported] ISA EISA MCA [LanguagesSupported] ENG ;----------------------------------------------------------------------- ; OPTION LIST ; ----------- ; This section lists the OEM Option key names. These keys are locale ; independent and used to represent the option in a locale independent ; manner. ; ;----------------------------------------------------------------------- [Options] OCE3XM OCE3XMMC [OptionsTextENG] OCE3XM = "Olicom Ethernet ISA 10/100 Adapter (OC-237X)" OCE3XMMC = "Olicom Ethernet MCA 10/100 Adapter (OC-2335)" [IOBaseAddrChoices] IOBase_1 = "Auto detect",0 IOBase_2 = "200h",512 IOBase_3 = "210h",528 IOBase_4 = "220h",544 IOBase_5 = "230h",560 IOBase_6 = "240h",576 IOBase_7 = "250h",592 IOBase_8 = "260h",608 IOBase_9 = "270h",624 IOBase_10 = "280h",640 IOBase_11 = "290h",656 IOBase_12 = "2A0h",672 IOBase_13 = "2B0h",698 IOBase_14 = "2C0h",714 IOBase_15 = "2D0h",730 IOBase_16 = "2E0h",746 IOBase_17 = "2F0h",752 IOBase_18 = "300h",768 IOBase_19 = "310h",784 IOBase_20 = "320h",800 IOBase_21 = "330h",816 IOBase_22 = "340h",832 IOBase_23 = "350h",848 IOBase_24 = "360h",864 IOBase_25 = "370h",880 IOBase_26 = "380h",896 IOBase_27 = "390h",912 IOBase_28 = "3A0h",928 IOBase_29 = "3B0h",944 IOBase_30 = "3C0h",960 IOBase_31 = "3D0h",976 IOBase_30 = "3E0h",992 [BusNumberChoices] BusNo_1 = "0",0 BusNo_2 = "1",1 BusNo_3 = "2",2 BusNo_4 = "3",3 BusNo_5 = "4",4 BusNo_6 = "5",5 BusNo_7 = "6",6 BusNo_8 = "7",7 [SpeedChoices] Speed_1 = 1,0,"&Auto" Speed_2 = 2,10,"1&0 Mbps" Speed_3 = 3,100,"&100 Mbps" ;----------------------------------------------------------------------- ; Constants for use with dialogs ;----------------------------------------------------------------------- [FileConstants] AdapterServiceName = "" UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 DialogDllName = "oce3xm.dll" HelpfileName = "oce3xm.hlp" NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\Drivers\Oc2xem.sys" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" OC2335_1BYTE = 71 OC2335_2BYTE = 100 NETCARD_ID = 25671 Manufacturer = "Olicom" ProductMajorVersion = "1" ProductMinorVersion = "10" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "OCE3XM" ProductSoftwareTitle = "Olicom Ethernet MCA/ISA 10/100 Adapter Driver" ProductSoftwareDescription = "Olicom Ethernet MCA/ISA 10/100 Adapter Driver" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\oce3xm.sys" NetRuleSoftwareType = "oce3xmSys ndisDriver oce3xmDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """Oce3xMSys"" yes no container" NetRuleSoftwareClass = {"oce3xmDriver basic"} NetRuleSoftwareBindable = {"oce3xmDriver oce3xmAdapter non exclusive 100"} ProductHardwareName = "OCE3XM" ProductHardwareOCE3XMTitle = "Olicom Ethernet ISA 10/100 Adapter (OC-237X)" ProductHardwareOCE3XMMCTitle = "Olicom Ethernet MCA 10/100 Adapter (OC-2335)" ProductHardwareTitle = $(ProductHardware$(Option)Title) ProductHardwareOCE3XMDescription = "Olicom Ethernet ISA 10/100 Adapter (OC-237X)" ProductHardwareOCE3XMMCDescription = "Olicom Ethernet MCA 10/100 Adapter (OC-2335)" ProductHardwareDescription = $(ProductHardware$(Option)Description) NetRuleHardwareType = "oce3xm oce3xmAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"oce3xmAdapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" CANNOT_FIND_ANY_CARD = "Network card is not present in the system" OCE3XMFunctionTitle = "Olicom Ethernet ISA 10/100 Adapter Setup (OC-237X)" OCE3XMMCFunctionTitle = "Olicom Ethernet MCA 10/100 Adapter Setup (OC-2335)" FunctionTitle = $($(Option)FunctionTitle) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) BusNoList = ^(BusNumberChoices, 1) BusNoValues = ^(BusNumberChoices, 2) SpeedList = ^(SpeedChoices, 1) SpeedValues = ^(SpeedChoices, 2) SpeedLabels = ^(SpeedChoices, 3) IOBaseDefault = 1 BusNoDefault = 1 SpeedDefault = 1 DuplexDefault = 4 [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" ContextMinimumID = 6000 ContextContentsID = 6000 ContextMaximumID = 6020 [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [AskSourceDlgText] OCE3XMDlgText = "Please enter the full path of the Olicom Ethernet ISA 10/100 "+ "Adapter driver setup files. Then choose Continue." OCE3XMMCDlgText = "Please enter the full path of the Olicom Ethernet MCA 10/100 "+ "Adapter driver setup files. Then choose Continue." DlgText = $($(Option)DlgText) ;----------------------------------------------------------------------- ; ADAPTER PARAMETER DIALOG (ISA) ; ------------------------------ ; This section sets up the adapter parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [AdapterParameterDlgENG] DlgType = "RadioCombination" DlgTemplate = "OCE3DLG" Caption = $(FunctionTitle) DlgText = "Please select values for the following fields:" Combo1Label = "&I/O Base Address:" Combo2Label = "&Bus Number:" Radio1Label = "&Speed" Radio1 = *($(SpeedLabels),1) Radio2 = *($(SpeedLabels),2) Radio3 = *($(SpeedLabels),3) Radio2Label = "&Duplex" Radio4 = "A&uto" Radio5 = "Ha&lf" Radio6 = "&Full" Edit1Label = "&Network Address:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrIndex) Combo2List = $(BusNoList) Combo2Out = $(BusNoIndex) ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} EditTextLim = 19 EditTextIn = $(NetworkAddress) RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextContentsID) ;----------------------------------------------------------------------- ; ADAPTER PARAMETER DIALOG (MCA) ; ------------------------------ ; This section sets up the adapter parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [AdapterMCAParameterDlgENG] DlgType = "RadioCombination" DlgTemplate = "OCE3DLGMC" Caption = $(FunctionTitle) DlgText = "Please select values for the following fields:" Combo1Label = "&I/O Base Address:" Combo2Label = "&Bus Number:" Radio1Label = "&Speed" Radio1 = *($(SpeedLabels),1) Radio2 = *($(SpeedLabels),2) Radio3 = *($(SpeedLabels),3) Radio2Label = "&Duplex" Radio4 = "A&uto" Radio5 = "Ha&lf" Radio6 = "&Full" Edit1Label = "&Network Address:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrIndex) Combo2List = $(BusNoList) Combo2Out = $(BusNoIndex) ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} EditTextLim = 19 EditTextIn = $(NetworkAddress) RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextContentsID) ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif Else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions Endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; ;------------------------------------------------------------------------ [InstallOption] StartWait set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Debug-Output "STF_CWDDIR is: "$(!STF_CWDDIR) Debug-Output "STF_LANGUAGE is: "$(!STF_LANGUAGE) set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL SetHelpFile $(HelpfileName) $(ContextMinimumID) $(ContextMaximumID) EndWait Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set IOBaseAddrIndex = *($(IOBaseAddrList), $(IOBaseDefault)) set BusNoIndex = *($(BusNoList), $(BusNoDefault)) set SpeedIndex = *($(SpeedList), $(SpeedDefault)) set NetworkAddress = *($(EditTextOut), 1) set RadioIn = { $(SpeedIndex), $(DuplexDefault) } set Duplex = "Auto" Shell "" DebugConfiguration "After parameter querying" ; Shell $(UtilityInf), GetBusTypeNum ; set BusTypeNum = $($R1) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; Debug-Output "ShellCode error." ; goto ShellCodeError ; endif Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Dll" Goto adapteroptions ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Else GetRegValue $(SoftwareKey), "ServiceName", ServiceNameList set AdapterServiceName = *($(ServiceNameList),4) set AdapterName = $(AdapterServiceName) CloseRegKey $(SoftwareKey) Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "IoBase" set IOBaseAddrValue = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNoValue = $(ValueData) else-ifstr(i) $(ValueName) == "NetworkAddress" set NetworkAddress = $(ValueData) else-ifstr(i) $(ValueName) == "Speed" set SpeedValue = $(ValueData) else-ifstr(i) $(ValueName) == "Duplex" set DuplexValue = $(ValueData) endif EndForListDo ; ; Combo-lists and radio-buttons use a special list of parameter-names ; when dialogs are executed. The following section converts the actual ; values into the corresponding names (indexes). If a value is undefined, ; the first entry in the index-list is used. ; set IOBaseAddrIndex = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValue))) ifstr(i) $(IOBaseAddrIndex) == "" set IOBaseAddrIndex = *($(IOBaseAddrList), 1) endif set BusNoIndex = *($(BusNoList), ~($(BusNoValues),$(BusNoValue))) ifstr(i) $(BusNoIndex) == "" set BusNoIndex = *($(BusNoList), 1) endif set SpeedIndex = *($(SpeedList), ~($(SpeedValues),$(SpeedValue))) ifstr(i) $(SpeedIndex) == "" set SpeedIndex = *($(SpeedList), 1) endif ifstr(i) $(DuplexValue) == "Auto" set Rad2 = 4 else-ifstr(i) $(DuplexValue) == "Half" set Rad2 = 5 else set Rad2 = 6 endif set RadioIn = {$(SpeedIndex), $(Rad2) } ; ; This section runs the dialogs. From the main dialog (adapter parameter ; setup) it is possible to enter the PCMCIA dialog if requested. When ; exiting the PCMCIA dialog the user is returned to the main dialog. ; adapteroptions = + set from = adapteroptions ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" goto unattended endif set OldNetAddress = $(NetworkAddress) ; ; Load DLL containing dialogs and verification routines ; LoadLibrary "Olicom Ethernet Driver Disk" $(DialogDllName) DialogHandle adapteroptions1 = + ; ; Read main dialog setup and show dialog ; ifstr(i) $(Option) == "OCE3XM" read-syms AdapterParameterDlg$(!STF_LANGUAGE) else read-syms AdapterMCAParameterDlg$(!STF_LANGUAGE) endif ui start "InputDlg" $(DialogHandle) ui pop 1 ; ; Save new settings because this dialog might be called again. ; If CANCEL was pressed these values will not be used ; ifstr(i) $(Option) == "OCE3XM" set IOBaseAddrIndex = $(Combo1Out) set BusNoIndex = $(Combo2Out) endif set SpeedIndex = *($(RadioOut),1) IfContains "4" IN $(RadioOut) set DuplexValue = "Auto" else-IfContains "5" IN $(RadioOut) set DuplexValue = "Half" else-IfContains "6" IN $(RadioOut) set DuplexValue = "Full" endif set NetworkAddress = *($(EditTextOut),1) ifstr(i) $(DLGEVENT) == "CONTINUE" ; ; parameters have already been stored at this stage ; goto nextstep else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." FreeLibrary $(DialogHandle) goto end else Debug-Output "Action: unknown: "$(DLGEVENT) FreeLibrary $(DialogHandle) goto end endif nextstep =+ ifstr $(NetworkAddress) != "" ; ; If network address has been entered then verify that it is a ; valid address (not a multicast or broadcast address) ; set FLibraryErrCtl = 1 LibraryProcedure DlgResult $(DialogHandle) VerifyEthAddress $(NetworkAddress) set FLibraryErrCtl = 0 ifstr $(DlgResult) != "STATUS_SUCCESS" FreeLibrary $(DialogHandle) set Error = $(DlgResult) goto nonfatal endif endif FreeLibrary $(DialogHandle) unattended =+ ; ; For MCA adapters we have utility functions to detect the presence ; of these adapters based on the adapter ID register ; ifstr(i) $(Option) == "OCE3XMMC" Shell $(UtilityInf), MCAFindBus, $(OC2335_1BYTE), $(OC2335_2BYTE) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = STATUS_USERCANCEL set from = "end" goto nonfatal endif set AdapterList = $($R1) endif ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait Ifint $(OldVersionExisted) != $(FALSE) Goto installhardware Endif ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Ifstr(i) $(SrcDir) == "" read-syms AskSourceDlgText Shell $(subroutineinf) DoAskSourceEx $(SrcDir) $(DlgText) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL), "" Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADUB.INF: Registry error: add software components" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." goto fatalregistry endif ; ; Insert hardware component in registry ; installhardware =+ ; ; As the MCA hardware installation operates on a list of adapters of ; adapters, this installation is handled separately. ; ifstr(i) $(Option) == "OCE3XMMC" ForListDo $(AdapterList) set BusNum = *($($),1) set SlotNum = *($($),2) Debug-Output $(BusNum) Debug-Output $(SlotNum) ; ; See if this device is already present ; Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ; ; If device was not present then do the hardware installation ; ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyProduct = $($R1) set KeyAdapterRules = $($R2) set KeyParameters = $($R3) set AdapterNumber = $($R4) set AdapterServiceName = $($R5) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyProduct) Set KeyProduct = "" set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif CloseRegKey $(KeyAdapterRules) set SpeedValue = *($(SpeedValues), ~($(SpeedList),$(SpeedIndex))) ifstr $(NetworkAddress) != "" set NewValueList = >($(NewValueList),{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}) endif set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),3},+ {McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(NETCARD_ID)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+ {Speed,$(NoTitle),$(!REG_VT_DWORD),$(SpeedValue)},+ {Duplex,$(NoTitle),$(!REG_VT_SZ),$(DuplexValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyParameters) set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." goto fatalregistry endif endif EndForListDo else ; ; This section is the ISA hardware installation ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyProduct = $($R1) set KeyAdapterRules = $($R2) set KeyParameters = $($R3) set AdapterNumber = $($R4) set AdapterServiceName = $($R5) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $(KeyProduct) Set KeyProduct = "" set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif CloseRegKey $(KeyAdapterRules) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyParameters) goto fatalregistry endif endif ; ; Write Adapter Parameters to registry ; writeparameters = + set DoWrite = NO ifstr(i) $(Option) == "OCE3XM" ; ; Prepare writing parameters for ISA adapter ; ; Shell $(UtilityInf), GetBusTypeNum ; set BusTypeNum = $($R1) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; Debug-Output "ShellCode error." ; goto ShellCodeError ; endif Ifstr(i) $(KeyParameters) == $(KeyNull) Debug-Output "*** KeyParameters is NULL at writeparameters" Endif ; ; Convert selections from combo-lists and radio-buttons into actual ; parameter values ; set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex))) set BusNoValue = *($(BusNoValues), ~($(BusNoList),$(BusNoIndex))) set SpeedValue = *($(SpeedValues), ~($(SpeedList),$(SpeedIndex))) ; ; Set up parameter list for AddValueList routine ; set NewValueList = {{IoBase,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNoValue)},+ {Speed,$(NoTitle),$(!REG_VT_DWORD),$(SpeedValue)},+ {Duplex,$(NoTitle),$(!REG_VT_SZ),$(DuplexValue)}} set DoWrite = YES else-ifstr(i) $(!NTN_InstallMode) == "Configure" ; ; This section applies to MCA adapters only. ; (if we are running the Install option these parameters has ; already been written). ; ; ; Convert selections from combo-lists and radio-buttons into actual ; parameter values ; set SpeedValue = *($(SpeedValues), ~($(SpeedList),$(SpeedIndex))) ; ; Set up parameter list for AddValueList routine ; set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {Speed,$(NoTitle),$(!REG_VT_DWORD),$(SpeedValue)},+ {Duplex,$(NoTitle),$(!REG_VT_SZ),$(DuplexValue)}} set DoWrite = YES endif ifstr(i) $(DoWrite) == YES ifstr $(NetworkAddress) != "" set NewValueList = >($(NewValueList),{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}) endif ; ; Now update registry ; Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif ; ; If the network address has been deleted then also delete it from ; the registry. ; ifstr $(OldNetAddress) != "" ifstr $(NetworkAddress) == "" DeleteRegValue $(KeyParameters) NetworkAddress endif endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Remove Adapter Section ;----------------------------------------------- ; ; Remove all adapter information from the registry ; removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING "Fatal Error" Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = "Error: "$(FunctionTitle) set STF_MB_TEXT = "Shell Code Error" set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif Debug-Output "OEMSETNT.INF: [Install-Option] DoCopy = "$(DoCopy) ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList else ; get minimum needed files for configuration LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\OCE3XM.DLL $(!STF_WINDOWSSYSPATH)\OCE3XM.DLL LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\OCE3XM.HLP $(!STF_WINDOWSSYSPATH)\OCE3XM.HLP endif exit [Source Media Descriptions] 1 = "Olicom Ethernet Driver Disk" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetnt.inf, SIZE=999, RENAME=$(!UG_Filename) [Files-OCE3XM] 1, OCE3XM.SYS, SIZE=999 [Files-OCE3XMMC] 1, OCE3XM.SYS, SIZE=999 [Files-Dll] 1, oce3xm.dll, SIZE=999 1, oce3xm.hlp, SIZE=999 [Files-dummy]Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.