GUIDE.TXT Driver File Contents (

The procedure to activate rtl8150 on linux is as follows:

  step 1: compile:
	   gcc -DMODULE -D__KERNEL__ -c rtl8150.c

  step 2: insert the driver as module:
           insmod rtl8150.o        
           (run 'lsmod' to see if the module is inserted)

  step 3: bind your card to an IP address:

           /sbin/ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST} 
           (run 'netstat -i' to see if there is a interface 'eth0')

  step 4: add your card to IP routing table and add gateway:
	   /sbin/route add default gw ${GATEWAY} dev eth0

*make sure that your kernel is version 2.4.0 above. Otherwise, you have to 
	upgrade your kernel.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.74