Readme.txt Driver File Contents (Geo_20PMAC_20Two_20Channel_20Executive_20Pro2.zip)

PMAC2 Setup Program Readme.TXT

!!!!READ AT LEAST THIS!!!!!

If you've never installed
a 32 bit Delta Tau Software
application before please do 
the following after installing
this software.

1.  Read Driver Installation Instruction
    from Delta Tau Common folder
2.  Then run P2Setup32Pro2.EXE

Release notes

Legend:
	- Bug that has been fixed
	+ New feature added
	* Not yet tested

Version
4.X:
+ communicate with PcommServer.exe
 
3.0:
+ Work with PC104 Only PWM

2.30.10:
- Only device 0 works properly
	All devices will work properly.

- Voltage six step test time does not show properly.
	The text now shows properly.

- Fine phasing graph title is wrong.
	Fine phasing title is corrected.

- Ix73 and Ix74 values are not zeroed while applying
 hall effect phasing.
	Phasing method is checked and all other 
	methods are cleared. i.e if hall effect 
	phasing then Ix73 and Ix74 set to 0. If
	Step phasing then Ix81 set to 0.

- I^2T is incorrect.
	Corrected.

- Voltage check is incorrect.
	Power check updated.

- Incorrect calculation of Ix79 and Ix29.
	Corrected.

+ Motors are killed after every step.

+ Non-integer values for current sensor and voltage
	six step tests.

+ In process check to protect against over current
	implemented during open current loop tests.


2.40.00
- Motor #8 position does not show
	Motor #8 position displays properly

+ Power check parameters for each motor is retained

- I2T for induction motor does not work properly
	I2T works properly for induction motor

+ More info. is added for Power check and for I2T

+ More info. is added to the Current Loop tuning results screen

+ Hall effect sensor test works with analog commutataion

- Display defects in Position loop auto tuning screen
	Fixed

- Stepper motor open loop screen does not check for amp fault or limits
	Now checks for fault and limits

+ Sinusoidal encoders with Acc 8D opt8 is supported.

E-Mail troubles to: Kumar@DeltaTau.COM

Thanks


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.78