readme.txt Driver File Contents (40002297_C.zip)

                   Release Notes  PN 93000483

                      Digi RealPort Driver
                  Version 1.2.13.0, 06/12/2003

                    Microsoft Windows 98/Me

                  Software Package PN 40002297


  CONTENTS

  Section      Description
  -------------------------------
  1            Introduction
  2            Supported Operating Systems
  3            Supported Products
  4            Known Limitations
  5            Installing the RealPort Driver
  6            Updating the RealPort Driver
  7            Additional Notes
  8            History

  1. INTRODUCTION

     This document describes the Digi RealPort Device Driver
     for Microsoft Windows 98 and Me.

     Refer to the following number when searching the Digi
     International Inc. web site (www.digi.com) or the ftp
     site (ftp.digi.com) for the latest software package:

     40002297_<highest revision letter>

  2. SUPPORTED OPERATING SYSTEMS

     Microsoft Windows 98
     Microsoft Windows Me

  3. SUPPORTED PRODUCTS

     Digi One EM
     Digi One IA
     Digi One IA RealPort
     Digi One RealPort
     Digi One SP
     Digi One TS
     Digi One TS H
     Digi One TS W
     Digi Flex
     Digi PortServer
     Digi PortServer II
     Digi PortServer TS 2
     Digi PortServer TS 2 H
     Digi PortServer TS 2 MEI
     Digi PortServer TS 2 W
     Digi PortServer TS 4
     Digi PortServer TS 4 H
     Digi PortServer TS 4 MEI
     Digi PortServer TS 4 W
     Digi PortServer TS 8
     Digi PortServer TS 16
     Digi EtherLite   2
     Digi EtherLite   8
     Digi EtherLite  16
     Digi EtherLite  32
     Digi EtherLite  80
     Digi EtherLite 160
     Digi EtherLite 162
     Digi Connect ME

  4. KNOWN LIMITATIONS

     The Device Manager incorrectly reports bogus resources for
     each of the RealPort serial ports (see the Ports (COM & LPT)
     category of the Device Manager). This is a limitation of the
     operating system, which requires that serial ports are
     associated with a physical address space, albeit phantom.

     If you plan to use the RealPort driver with serial printers,
     you may want to reboot the system after device installation or
     after renaming ports to see the new ports listed in the Print
     Spooler's list of available ports. This is a known limitation
     of the Print Spooler, which does not detect changes in the
     list of available ports automatically.

     If you experience difficulties operating serial printers, try
     enabling the option, "Complete write requests immediately."
     A checkbox of the same name can be found in the port's Port
     Properties dialog in the Device Manager.

  5. INSTALLING THE REALPORT DRIVER

     To install the driver, follow these steps:

     o Close the Device Manager if it is running.

     o Unzip the driver archive to a folder of your choice.

     o Run DIGIRPCL.BAT to remove any previous INF file versions.

     o Open Start > Settings > Control Panel.

     o Locate and run the control panel named "Add New Hardware".

     o Windows indicates that it will next search for new Plug and
       Play devices, which may take a few moments. Choose "Next >"
       to continue.

     o If Windows finds any new Plug and Play devices for which it
       has installation files, it will install them and will
       complete the Add New Hardware Wizard. If this happens, rerun
       the Add New Hardware Wizard. Otherwise, Windows may find
       some devices for which it doesn't have installation files
       and will list them now.

     o Tell Windows the device you want to install isn't listed by
       selecting the radio entitled, "No, the device isn't in the
       list." Choose "Next >" to continue. (This dialog does not
       appear in Windows Me.)

     o Windows allows you to search for non-Plug and Play
       compatible devices. Select instead the radio, "No, I want to
       select the hardware from a list," and choose "Next >".

     o Windows displays a list of hardware categories. Select
       "Other devices" and choose "Next >" to continue.

     o Windows will display a list of known hardware in the
       category previously selected. Don't select any device from
       the list. Instead, choose "Have Disk..." to point Windows to
       the location of the installation files.

     o Enter the path to the installation files. Choose "OK".

     o Windows now searches the indicated directory for
       installation files and displays a list of devices it can
       install. Find your device in the list, select it, and choose
       "Next >."

     o Choose "Finish" to continue the installation.

     o The RealPort driver will now ask for the device's I.P.
       address and TCP port. Enter this information and choose
       "OK" to complete the installation. You can change this
       information later via the Device Manager.

  6. UPDATING THE REALPORT DRIVER

     To update the driver, follow these steps:

     o Close the Device Manager if it is running.

     o Unzip the driver archive to a folder of your choice.

     o Run DIGIRPCL.BAT to remove any previous INF file versions.

     o Next, open the Device Manager:

        - Open Start > Settings > Control Panel.

        - Run the control panel named "System".

        - Click the "Device Manager" tab.

    o Find and open the "Multi-port serial adapters" category.

    o Display the properties dialog for the device you would like
      to update.

    o Click the "Driver" tab.

    o Choose "Update Driver..." to run the Update Device Driver
      Wizard.

    o Choose "Next >".

    o The default radio button should be selected, "Search for a
      better driver than the one your device is using now."
      Choose "Next >".

    o Deselect all radio buttons.

    o Select the radio button entitled, "Specify a location:".

    o Enter the path to the updated driver files (the directory
      to which you unpacked the archive) or click "Browse..." to
      graphically search for and select the directory.

    o Choose "Next >" after you have entered the directory path.

    o The Update Device Driver Wizard now suggests a driver to
      install, albeit the wrong driver. Select instead the radio
      button entitled, "One of the other drivers."

    o Choose "View List..." to display the list of other drivers.

    o Choose the proper device description from the list (the
      description should match the description of the device
      being updated). Choose "OK".

    o Choose "Next >".

    o Choose "Next >".

    o The driver will prompt for the I.P. address and TCP port of
      the device. The values previously used by the device should
      already be entered by default. Choose "OK" to continue.

    o Choose "Finish" to complete the update.

  7. ADDITIONAL NOTES

     On-line help is available after installing the product.

     Additional documentation can be found at Digi's Web site,
     http://www.digi.com, or at Digi's FTP server, ftp://ftp.digi.com.

     ALLOW PORTS TO BE OPENED WHEN NETWORK IS UNAVAILABLE
     ----------------------------------------------------

     Turn this feature on if you want the RealPort driver to
     always succeed open requests, even if the driver cannot
     communicate with the remote device at the time of the open.
     By default, the driver only succeeds an open request if it
     can communicate with the remote device.

  8. HISTORY

     Version 1.2.13.0 (Rev. C, June 12, 2003)
     ----------------------------------------
     o Added support for Digi Connect ME.
     o Corrected Digi Flex installation to install two ports.

     Version 1.1.11.0 (Rev. B, April 22, 2003)
     -----------------------------------------
     o Added support for Digi One TS H, Digi PortServer TS 2 H,
       and Digi PortServer TS 4 H.
     o Added support for Digi One TS W, Digi PortServer TS 2 W,
       and Digi PortServer TS 4 W.

     Version 1.0.10.0 (Rev. A, February 04, 2003)
     --------------------------------------------
     o Added on-line help documentation.
     o Appended dialog to Add New Hardware Wizard to prompt for
       device IP address and TCP port when installing.
     o Exposed GUI option to allow serial ports to be opened
       even if the driver cannot communicate with the remote device.
     o Improved read callback signaling.

     Version 1.0.3.0 (Rev. 1P, November 19, 2002)
     --------------------------------------------
     o Pilot release
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.07