ozscr98.INF Driver File Contents (PCMCIA_N35BS8.zip)

; O2SCR98.INF
; Copyright (c) 2000 O2Micro

[Version]
CatalogFile=ozscr98.cat
Signature=$CHICAGO$
Class=SmartCardReader
ClassGuid={50DD5230-BA8A-11D1-BF5D-0000F805F530}
Provider=%O2Micro%
LayoutFile=layout.inf
DriverVer=03/18/2002,2.00.06.00

[SourceDisksNames]
1=%DiskName%,,

[SourceDisksFiles]
ozscr.sys=1

; ================= Class section =====================
[ClassInstall]
Addreg=SmartCardReaderClassReg

[SmartCardReaderClassReg]
HKR,,,0,%ClassName%
HKR,,Icon,,-25
HKR,,,,"SmartCard"

[Manufacturer]
%O2Micro%=O2Micro

; ================= O2 readers =====================

[O2Micro]
; DisplayName       	Section          DeviceId
; -----------       	-------          --------
%O2SCBUS.DeviceDesc% =   O2SCBUS.Install, PCMCIA\O2Micro-SmartCardBus_Reader-2E10


[O2SCBUS.Install]
BusType         = 8
AddReg          = O2SCBUS.Install.AddReg
CopyFiles       = O2SCBUS.Install.CopyFiles


[O2SCBUS.Install.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,OZSCR.SYS
HKR,,Description,,%O2SCBUS.DeviceDesc%

HKR,Override,0000,1, \ ;
00,04,00,00, \            ; CONFIGMG_VERSION
00,00,00,00, \            ; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \            ; Total length of I/O Resource Descriptor
02,00,00,00, \            ; ResType_IO = 0x00000002
01,00, \                  ; IOD_Count;
0C,00, \                  ; IOD_Type;    // IOType_Range = 0x000C
00,00, \                  ; IOD_Alloc_Base;
00,00, \                  ; IOD_Alloc_End;
00,00, \                  ; IOD_DesFlags;
00, \                     ; IOD_Alloc_Alias;
00, \                     ; IOD_Alloc_Decode;
00,FF, \                  ; IOR_Align;    // Mask for base alignment
FF,00, \                  ; IOR_nPorts;    // Number of ports
00,00, \                  ; IOR_Min;    // Min port address
FF,FF, \                  ; IOR_Max;    // Max port address
00,00, \                  ; IOR_RangeFlags;  // Flags
00, \                     ; IOR_Alias;    // Alias offset
00, \                     ; IOR_Decode;    // Address specified
40,00,00,00, \            ; PCCARD flags, 0x40 = 16-bit port
;
; Memory Resource Descriptor
;
34,00,00,00, \            ; Total length of Memory Descriptor
01,00,00,00, \            ; ResType_Mem = 0x00000001
01,00, \                  ; MD_Count;
14,00, \                  ; MD_Type;    // MType_Range = 0x0014
00,00,00,00, \            ; MD_Alloc_Base;
00,00,00,00, \            ; MD_Alloc_End;
00,00, \                  ; MD_Flags;
00,00, \                  ; MD_Reserved;
00,F0,FF,FF, \            ; MR_Align;    // Mask for base alignment
00,10,00,00, \            ; MR_nBytes;    // Count of bytes
00,00,0D,00, \            ; MR_Min;    // Min Address
FF,FF,FF,FF, \            ; MR_Max;    // Max Address
00,00, \                  ; MR_Flags;    // Flags
00,00, \                  ; MR_Reserved;
08,00,00,00, \            ; PCCARD flags, 0x02 = attribute mem, or
\                         ;    0x08 = 16-bit common mem
00,00,00,00, \            ; Memory card address offset
\
;
; IRQ Resource Descriptor
;
14,00,00,00, \            ; Total length of IRQ Resource Descriptor
04,00,00,00, \            ; ResType_IRQ = 0x00000004
03,00, \                  ; IRQD_Flags; 1:shareable 0:exlusive owned
00,00, \                  ; IRQD_Alloc_Num;  // Allocated IRQ number
FF,FF, \                  ; IRQD_Req_Mask;  // Mask of possible IRQs
00,00, \                  ; IRQD_Reserved;
20,00,00,00, \            ; PCCARD flags, 0x20 = Level mode int's
;
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00,\			; Length of REQUEST_CONFIG_PKT Descriptor
7c,89,00,00,\			; ResType_Ignored_Bit+PCCARD_DEVICE_ID= 0x897C
00,00,\					; Socket;
02,00, \               ;   Attributes
32,\					; Vcc;
32,\					; Vpp1;
32,\					; Vpp2;
02,\					; IntType;
a0,0f,00,00,\			; ConfigBase;
00,\					; Status;
00,\					; Pin;
00,\					; Copy;
01,\					; ConfigIndex;
01,\					; Present;
00,00,00,00             ; TERMINATOR

HKR,,EnableIRQSharing,1,01,00,00,00 

[O2SCBUS.Install.CopyFiles]
OZSCR.SYS,,,2

[O2SCBUS.Install.Services]
AddService = O2SCBUS, 2, O2SCBUS.Service, O2SCBUS.EventLog

[O2SCBUS.Service]
DisplayName     = %O2SCBUS.DeviceDesc%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_AUTO_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %11%\OZSCR.SYS

[O2SCBUS.EventLog]
AddReg = O2SCBUS.AddEventLog.reg

[O2SCBUS.AddEventLog.reg]
HKR,, EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\drivers\OZSCR.SYS"
HKR,, TypesSupported,   0x00010001, 7

[DestinationDirs]
O2SCBUS.Install.CopyFiles = 10,System32\Drivers
DefaultDestDir=10,System32\Drivers

; ================= Strings =====================

[Strings]
O2Micro                  = "O2Micro"
O2SCBUS.DeviceDesc       = "O2Micro SmartCardBus Reader"
ClassName                = "SmartCardReader"
DiskName		 = "O2Micro SmartCardBus Installation Disk"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.35