Release Notes P/N 93000410A
Digi DataFire ISDN Driver
Version V4.00
Microsoft Windows 95/98/98SE/Me
Product/Part numbers
40002012E DataFire Pico
40002093B DataFire Micro V
08/10/2001
INTRODUCTION
The Digi DataFire ISDN Driver is host based driver stack offering a extremely
high net throughput rate. Simple to install, it connects your PC to the Internet
with ISDN speed and provides a variety of functionality.
CONNECTIVITY
- DataFire Pico: PCMCIA, S0-BRI, auto-detection of ISAC/HSCX and IPAC
- DataFire Micro V: PCI 2.2, S0-BRI, 3.3V and 5V support
- WAN Miniport driver (32-bit)
- CAPI 2.0 inteface
NETWORK PROTOCOLS
- DSS1 (Euro-ISDN), 5ESS, NI-1, DMS-100, INS-64, TPH 1962
LINE SUPPORT
- Point to Multipoint
- Point to Point
POWER MANAGEMENT
- Support of Suspend/Resume (Windows 98/98SE/Me only)
APPROVALS
- DataFire Pico: Europe (CE0682X)
- DataFire Micro V: Europe (CE0682X)/USA/Canada
CAPI 2.0
- CAPI20.DLL (16-bit user mode)
- CAPI2032.DLL (32-bit user mode)
- VXD-Interface (32-bit, no INT F1)
- B1-Protocol
o 64 Kbit/s HDLC framing
o 64 Kbit/s bit transparent with byte framing from the network
o V.110 asynchronous operation with start/stop byte framing
o V.110 synchronous operation (for 56 Kbit/s HDLC framing)
o T.30 modem for FAX group 3
o 56 Kbit/s bit transparent with byte framing from the network
o Modem with full negotiation
o Modem asynchronous operation with start/stop byte framing
o Modem synchronous with HDLC framing
- B2-Protocol
o ISO 7776 (X.75 SLP)
o Transparent
o LAPD according Q.921 for D-Channel X.25 (X.31)
o T.30 for FAX group 3
o Modem with full negotiation
o V.120 asynchronous mode
- B3-Protocol
o Transparent
o T.90NL with compatibility to T.70NL according to T.90 Appendix II
o ISO 8208 (X.25 DTE-DTE)
o T.30 for FAX group 3
o T.30 for FAX group 3 with extensions
o Modem
EXTENDED FEATURES
- D-channel
o Fixed TEI configuration support
o Point to Point configuration support
o Layer 2 permanent switchable via registry key
o S0 Termination switchable for DataFire Micro V (with relais option)
o Automatic overlap sending for called party numbers longer than 20 digits
- B-channel
o B1 protocol 64 kbit/s bit transparent with variable blocksize
o B1 protocol 56 kbit/s bit transparent with variable blocksize
o B channel loop switch option (with D-channel protocol 8001)
- CAPI
o INFO_IND broadcasting support
o INFO_IND support for DDI
o INFO_REQ support for overlap-dialling
o FACILITY_XXX support for DTMF
o CONNECT_IND broadcasting support
o CONNECT_XXX HLC, LLC, BC support
o CONNECT_XXX Additional Info support
o CONNECT_XXX subaddressing support
o CONNECT_B3_T90_ACTIVE_IND support
o SELECT_B_PROTOCOL_REQ support
o Early B3 Connect support
- FAX
o Lines: 2 B-channels
o Speed: max. 14.400 bit/s
o Resolution: standard and high
o Transfer: error correction mode (ECM)
o Coding Method: MH, MR, MMR
o Voice Coding: a-law, u-law
- Modem
o Lines: 1 B-channel
o Speed: max. V.34 (28.800 bit/s)
o Error correction: V.42
o Compression: V.42bis
WAN MINIPORT
- HDLC transparent (Standard PPP)
- X.75 (PPP over X.75)
- Indication of own MSN on outgoing calls
- Call acceptance on particular MSN (Accepted MSN)
SUPPORTED PRODUCTS
DataFire Pico
DataFire Micro V
HISTORY
V4.00 (08/10/2001)
First release tracked in this document.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.