1. 4001640B.exe Driver
2. 93000306.txt File Contents

93000306.txt Driver File Contents (4001640B.exe)

                     Release Notes 93000306_A    
                              for
                    Digi DataFire Sync2000 Adapters
                          Windows NT 4.0
                             v3.0.46
                       Release Date: 10/19/1998
		

Please reference the following number(s) when searching the Digi FTP/WWW
site for the latest software packages:
Software Image P/N 40001835_A

These numbers are for informational purposes only:
CD-ROM Software Image P/N 40001630_A



Installation/User Interface:

1.	Currently simultaneously adding two or more adapters does not work. Adapters
	need to be added one board at a time.


2.	Within the wizard mode, if invalid input has been entered and back button is 
	pressed, an error message still appears indicating that the input is invalid.
	A valid input needs to be entered to be able to go back.



3.	The digi diver services  cannot be stopped from the control panel. This will
	be fixed in the final release of the driver. 

4.      SxbDiag.exe - the diagnostic program is not being installed with this release. 
        To run it, copy it from the \win_nt\sync directory off of the CD-ROM to your 
	local hard drive and then execute it.

5.      Upon configuring SVC's under X.25 the system needs to be rebooted before going
	into RAS Services and adding the RAS capable SVC ports. This will be fixed in the 
	final release of the driver.