Readme for Intelligent ISDN USB ******************************* 1. Alterations against manual: ----------------------------------- a-law/µ-law switch: a-law/µ-law selection is made automatically by selected D-Channel protocol. You may override this automatic selection by using this configuration switch. To change this setting open the network control panel and display the properties of the 'Intelligent ISDN USB WAN-Miniport + Capi 2.0'. Switch to the 'advanced' tab on the property pages and select 'a/b Speech coding'. Change the value to your needs. You will have to reboot before the change will take effect. 2. Limitations / Known issues: ------------------------------------ 2.1. Installation under Windows 98: If the Microsoft Dial-Up-Networking was not installed at any time on your Windows 98 system it will be installed automatically during the installation of the Intelligent ISDN USB. If you had installed the Microsoft Dial-Up-Networking any time before on your Windows 98 system but it isn't installed anymore please use the Add/Remove programs control panel to install the Dial-Up-Networking. 2.2. Driver under Windows 98 Second Edition: Windows 98 Second Edition Problems with NDIS Intermediate Drivers SYMPTOMS ======== On a computer that is running Windows 98 Second Edition and using networking software that is implemented as a Network Driver Interface Specification (NDIS) intermediate driver, one of the following symptoms may occur: The computer may stop responding (hang) while starting up or shutting down. Your network throughput and overall network performance may gradually decrease, sometimes to the point that the computer hangs or becomes completely unresponsive to network requests. CAUSE ===== This problem can occur if the NDIS intermediate driver code is preempted by the operating system when it is not safe to do so. As a result, a "race" or "deadlock" condition may occur, causing the operating system to hang. RESOLUTION ========== A supported fix that corrects this problem is now available from Microsoft, but it has not been fully regression tested and should be applied only to systems experiencing this specific problem. To resolve this problem immediately, download the fix from WWW.MICROSOFT.COM. Search for "Q243199" and follow the link to the downloadpage. Copyright Intelligent 2003/07/02Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.