; Internal Version 1.57
;***********************************************************************
;
; OEMSETUP.INF
;
; Novell NetWare PCI card INF for Novell ODI drivers
;
;***********************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
"Jazz-Internal Bus"
[LanguagesSupported]
ENG
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
NwSubsInf = "NWSUBS.INF"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Hewlett Packard"
ClientProvider = "Novell"
ProductMajorVersion = "1"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
DriverName = "OdiLoad"
OdiModules = "ODI_Modules"
NE3200_1BYTE = 511034
NetRuleHardwareType = "nwDriver nwAdapter"
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(ClientProvider)"\"$(DriverName)"\CurrentVersion"
; ParamKeyname not used - not updated
; ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardware$(Option)Name)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\netware
[ODIParameters]
ODINodeAddress = ""
ODIDriverAdditionalParms = {}
ODICustomList = {}
ODITokenRing = ""
ODITokenRingSnap = ""
;
; File specific Parameters:
; ISA LAN Driver file:
; ODISlotList = {}
; ODIDefaultSlot = ""
; MCA and EISA LAN Driver files:
; ODISlotList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16}
; ODIDefaultSlot = "2"
;
ODISlotList = {}
ODIDefaultSlot = ""
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
read-syms ODIStrings$(!STF_LANGUAGE)
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = {}
ForListDo $(OptionList)
set OptionTempString = " ODI "#($($),Title,1)$(AdapterForNetWare)
set OptionTextList = >($(OptionTextList), $(OptionTempString) )
EndForListDo
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms ODIParameters
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms ODIStrings$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set CurrentInstallMode = ""
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
set CurrentInstallMode = configure
set DoCopy = YES
set AddCopy = YES
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
set CurrentInstallMode = configure
else
set DoCopy = YES
set AddCopy = YES
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set ParameterListNames = ^(DefaultParameterLists, 1) ; NWIRQList, NWMEMList1, etc.
set ListNames = ^(ODIListNamesSection, 1) ; List1, list2, ..., list6
set ODIKeywordList = ^(ChoicesNamesList, 1) ; Int, mem, Port, etc.
set ODITitleList = ^(ChoicesNamesList, 2) ; Interrupt Number, Port, etc.
set MSParameterList = ^(ChoicesNamesList, 3) ; InterruptNumber, IOBaseAddress, etc.
set DriverListNames = {}
set ODINumberofDriverLists = 0
ForListDo ^($(Option),0 )
ifcontains(i) $($) IN $(ListNames)
set DriverListNames = >($(DriverListNames), $($))
else-ifstr(i) $($) == "CUSTOM"
set ODICustomList = #($(Option), Custom, 1)
endif
EndForListDo
QueryListSize ODINumberofDriverLists $(DriverListNames)
; DriverListNames now contains the List names the selected ODI driver has (i.e. {List1, List2})
; ODINumberofDriverLists now contains the number of lists used
ForListDo $(DriverListNames)
set $($)Keyword = #($(Option), $($), 1)
ifstr $($($)Keyword) != ""
set $($)Default = #($(Option), $($), 3)
ifcontains(i) $($($)Keyword) IN $(ODIKeywordList)
set $($)Title = *($(ODITitleList), ~($(ODIKeywordList), $($($)Keyword)))
set ThisListName = #($(Option), $($), 2)
set MSParameterName$(#) = *($(MSParameterList), ~($(ODIKeywordList), $($($)Keyword)))
set FinalList = {}
ifcontains(i) $(ThisListName) IN $(ParameterListNames)
ifstr(i) #($(Option), $($), 4) == "ALL"
set FinalList = ^($(ThisListName), 1)
else
set CountUpTo = #($(Option), $($), 5)
ifstr(i) $(CountUpTo) == "END"
set CountUpTo = $(MAXIMUM_ALLOWED)
endif
set StartNumber = #($(Option), $($), 4))
ForListDo ^($(ThisListName), 1)
ifint $(#) >= $(StartNumber)
ifint $(#) <= $(CountUpTo)
set FinalList = >($(FinalList), $($))
endif
endif
EndForListDo
endif
else
; User passed in the list
set $($)Title = #($(Option), $($), 2)
set FinalList = #($(Option), $($), 4)
endif
else
; User passed in a new keyword
set $($)Title = #($(Option), $($), 2)
set MSParameterName$(#) = ""
set FinalList = #($(Option), $($), 4)
endif
set $($)List = $(FinalList)
endif
EndForListDo
skipmakingthelists = +
set ODILANDriverTitle = #($(Option), Title, 1)
Split-String #($(Option), DriverName, 2) "." SplitFileNameList
set ODILANDriverName = *($(SplitFileNameList), 1)
set ODIMediaType = #($(Option), MediaType, 1)
set ODICardType = #($(Option), CardType, 1)
set ODICardId = #($(Option), CardId, 1)
ifstr(i) $(ODICardType) == "PCI"
set ODIVendor = #($(Option), Vendor, 1)
endif
ifstr(i) #($(Option), CanShareSlot, 1) == "YES"
set SkipDescriptionCheck = "NO"
else
set SkipDescriptionCheck = "YES"
endif
ifstr(i) $(ODIMediaType) == "ETHERNET"
set NdisMediaType = "1"
else-ifstr(i) $(ODIMediaType) == "TOKEN-RING"
set NdisMediaType = "2"
else-ifstr(i) $(ODIMediaType) == "FDDI"
set NdisMediaType = "4"
else
set NdisMediaType = ""
endif
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
install "Install-Option"
goto adapteroptions
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
Endif
Endif
Set AdapterNumber = ""
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
set ServiceAreaHandle = $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
GetRegValue $(KeyParameters) ODILoadName ODILoadName
Set CardInstanceName = *($(ODILoadName),4)
Ifstr $(CardInstanceName) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set KeyToFind = $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) DriverKey
Ifstr $(DriverKey) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
Endif
GetRegValue $(DriverKey) Parameters ParameterList
; get the data portion
set ParameterList = *($(ParameterList), 4)
ForListDo $(ParameterList)
set ThisParameterList = $($)
Split-String $($) " " SplitList
set KeyToSearchFor = *($(SplitList), 1)
set ValueToUse = *($(SplitList), 3)
; #1 #2 #3
; "Parm" " " "Value"
set ValueFound = 0
; check frametypes for TOKEN-RING, TOKEN-RING_SNAP
ifstr(i) $(KeyToSearchFor) == "FRAME"
; Don't append Frametypes to ODIAdditionalParms, so set ValueFound = 1
set ValueFound = 1
QueryListSize SplitListSize $(SplitList)
ifstr(i) *($(SplitList), 3) == "TOKEN-RING"
set LastParameter = *($(SplitList), $(SplitListSize))
ifstr(i) $(LastParameter) == "MSB"
set ODITokenRing = "MSB"
else-ifstr(i) $(LastParameter) == "LSB"
set ODITokenRing = "LSB"
else
; Not there, so default to MSB
set ODITokenRing = "MSB"
endif
else-ifstr(i) *($(SplitList), 3) == "TOKEN-RING_SNAP"
set LastParameter = *($(SplitList), $(SplitListSize))
ifstr(i) $(LastParameter) == "MSB"
set ODITokenRingSnap = "MSB"
else-ifstr(i) $(LastParameter) == "LSB"
set ODITokenRingSnap = "LSB"
else
; Not there, so default to MSB
set ODITokenRingSnap = "MSB"
endif
endif
; Check for NODE parameter
else-ifstr(i) $(KeyToSearchFor) == "NODE"
set ODINodeAddress = $(ValueToUse)
set ValueFound = 1
; Check for SLOT parameter
else-ifstr(i) $(KeyToSearchFor) == "SLOT"
set ODIDefaultSlot = $(ValueToUse)
set ValueFound = 1
; Check for BUSNAME parameter - ignore it
else-ifstr(i) $(KeyToSearchFor) == "BUSNAME"
set ValueFound = 1
; Check for BUSTYPE parameter
else-ifstr(i) $(KeyToSearchFor) == "BUSTYPE"
set ValueFound = 1
set BusInterfaceType = $(ValueToUse)
; Check for BUS parameter
else-ifstr(i) $(KeyToSearchFor) == "BUS"
set ValueFound = 1
set BusNumber = $(ValueToUse)
endif
ForListDo $(DriverListNames)
ifstr(i) $(KeyToSearchFor) == $($($)Keyword)
set $($)Default = $(ValueToUse)
set ValueFound = 1
ifcontains(i) $(ValueToUse) NOT-IN $($($)List)
set $($)List = >($($($)List), $(ValueToUse))
endif
endif
EndForListDo
ifint $(ValueFound) == 0
set FoundInCustom = 0
ForListDo $(ODICustomList)
ifstr(i) $($) == $(ThisParameterList)
set FoundInCustom = 1
endif
EndForListDo
ifint $(FoundInCustom) == 0
ifstr $(ODIDriverAdditionalParms) == {}
set ODIDriverAdditionalParms = $(KeyToSearchFor)" "$(ValueToUse)
else
set ODIDriverAdditionalParms = >($(ODIDriverAdditionalParms), $(KeyToSearchFor)" "$(ValueToUse))
endif
endif
endif
EndForListDo
adaptersetup =+
goto adapteroptions
adapteroptions = +
set from = adapteroptions
; Find what NLS directory is being used
set NovellParameters = $(!NTN_SoftwareBase)"\"$(ClientProvider)"\Parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters
ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
GetRegValue $(KeyNovellParameters) "NWLanguage" LanguageList
ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
set NLSDirName = *($(LanguageList), 4)
LoadLibrary $(NetWareForWindowsNT) $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwsetupr.dll" NwLibHandle
SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwnthelp.hlp" $(!MinimumID) $(!MaximumID)
else
goto fatalregistry
endif
CloseRegKey $(KeyNovellParameters)
else
goto fatalregistry
Endif
dothedialog = +
ifint $(ODINumberofDriverLists) == 0
ifstr(i) $(CurrentInstallMode) == configure
read-syms NoParms$(!STF_LANGUAGE)
ui start "WorkstationDLG" $(NwLibHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "OK hit"
else-ifstr(i) $(DLGEVENT) == "EXIT"
; user selected the advanced button
goto doadvancedsettings
endif
endif
else
read-syms LANDriverDlg$(!STF_LANGUAGE)
set NotifyFields = {}
set ComboListItemsIn = {}
set ComboListItemsOut = {}
ForListDo $(DriverListNames)
set NotifyFields = >($(NotifyFields), "NO")
set ComboListItemsIn = >($(ComboListItemsIn), $($)List)
ifstr $($($)Value) == ""
set $($)Value = $($($)Default)
endif
set ComboListItemsOut = >($(ComboListItemsOut), $($)Value)
EndForListDo
ui start "LANDriverParms" $(NwLibHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "Continue hit"
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(NwLibHandle)
goto end
else-ifstr(i) $(DLGEVENT) == "EXIT"
doadvancedsettings =+
; user selected the advanced button
read-syms AdvancedDialog$(!STF_LANGUAGE)
set RadioIn = {}
set ComboListItemsIn = {}
set ComboListItemsOut = {}
set ComboOut = $(ODIDefaultSlot)
ifstr(i) $(ODIMediaType) == "TOKEN-RING"
ifstr(i) $(ODISlotList) == {}
set DlgTemplate = "DLG_ADVANCEDDRIVER3"
else
set ComboListItemsIn = { ODISlotList }
set ComboListItemsOut = { ComboOut }
set DlgTemplate = "DLG_ADVANCEDDRIVER1"
endif
ifstr(i) $(ODITokenRing) == "LSB"
set RadioIn = { 2 }
else
set RadioIn = { 1 }
endif
ifstr(i) $(ODITokenRingSnap) == "LSB"
set RadioIn = >($(RadioIn), "4")
else
set RadioIn = >($(RadioIn), "3")
endif
else
ifstr(i) $(ODISlotList) == {}
set DlgTemplate = "DLG_ADVANCEDDRIVER4"
else
set ComboListItemsIn = { ODISlotList }
set ComboListItemsOut = { ComboOut }
set DlgTemplate = "DLG_ADVANCEDDRIVER2"
endif
endif
ui start "AdvancedDialog" $(NwLibHandle)
ui pop 1
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ODINodeAddress = *($(EditTextOut), 1)
set ODIDefaultSlot = *($(ComboOut), 1)
ifcontains "2" IN $(RadioOut)
set ODITokenRing = "LSB"
else
set ODITokenRing = "MSB"
endif
ifcontains "4" IN $(RadioOut)
set ODITokenRingSnap = "LSB"
else
set ODITokenRingSnap = "MSB"
endif
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "Action: CANCEL. Bye."
endif
goto dothedialog
else
ui pop 1
FreeLibrary $(NwLibHandle)
goto end
endif
ui pop 1
ForListDo $(DriverListNames)
Debug-Output "List"$(#)"Value = "$($($)Value)
EndForListDo
endif
FreeLibrary $(NwLibHandle)
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(CurrentInstallMode) == configure
goto writeconfigureparameters
endif
endif
StartWait
goto writeparameters
writeparameters = +
; Use the GetPCIInformation utiltiy to find the bus number and slot number
; the adapter is installed in.
set NTBusType = 5
Shell $(UtilityInf), GetPCIInformation, $(ODIVendor) $(ODICardId)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
EndWait
goto ShellCodeError
endif
set AdapterList = $($R0)
set ProductHardwareDescription = +
"ODI "$(ODILANDriverTitle)$(AdapterForNetWare)
ForListDo $(AdapterList)
; Steps need to be taken for multiple adapters of the same type.
set NTBusNumber = *($($),1)
set NTSlotNumber = *($($),2)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(NTBusNumber), +
$(NTSlotNumber), $(ProductHardwareDescription), +
$(ODILANDriverName), $(SkipDescriptionCheck)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),+
$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS),+
$(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF:Cannot add hardware component "$($ShellCode)
EndWait
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
Set-add TempAdapterNumber = $(AdapterNumber),0
set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber)
set NewValueList = {{ClientProvider,$(NoTitle),$(!REG_VT_SZ),+
$(ClientProvider)}, {Title,$(NoTitle),$(!REG_VT_SZ),+
"["$($R4)"] ODI "$(ODILANDriverTitle)$(AdapterForNetWare)},+
{Description,$(NoTitle),$(!REG_VT_SZ),+
$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
EndWait
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),+
$(NetRuleHardwareType)},{bindform,$(NoTitle),$(!REG_VT_SZ),+
$(TempBindForm)}, {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
EndWait
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}
SetRegValue $(KeyParameters) {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)}
SetRegValue $(KeyParameters) {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}
writeconfigureparameters = +
; Jump to here if the drivers is already installed and specific driver
; configuration was selected.
ifstr(i) $(NdisMediaType) == ""
set NdisMediaType = "1"
endif
set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD), +
$(NdisMediaType)}}
ForListDo $(DriverListNames)
ifstr $(MSParameterName$(#)) != ""
set-hextodec DecValue = $($($)Value)
set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle), +
$(!REG_VT_DWORD), $(DecValue)}
set NewValueList = >($(NewValueList), $(ValueToAdd))
endif
EndForListDo
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
EndWait
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
goto fatalregistry
endif
set PromptForSrcRouting = "FALSE"
Ifstr(i) $(ODIMediaType) == "ETHERNET"
set ODIParmList = {"Frame ETHERNET_802.2", +
"Frame ETHERNET_802.3", +
"Frame ETHERNET_II", +
"Frame ETHERNET_SNAP" }
else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING"
set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), +
"Frame TOKEN-RING_SNAP "$(ODITokenRingSnap) }
;If there is an ODI stack available remove the comment on the next line
;set PromptForSrcRouting = "TRUE"
else-Ifstr(i) $(ODIMediaType) == "FDDI"
set ODIParmList = {"Frame FDDI_802.2", +
"Frame FDDI_SNAP" }
;If there is an ODI stack available remove the comment on the next line
;set PromptForSrcRouting = "TRUE"
else
set ODIParmList = {}
endif
; Build List to send to ODI_MODULES\CARDNAME
ForListDo $(DriverListNames)
ifstr $($($)Value) == $(Present)
set ODIParmList = >($(ODIParmList), $($($)Keyword))
else-ifstr $($($)Value) != $(NotPresent)
set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value))
endif
EndForListDo
ifstr $(ODINodeAddress) != ""
set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress))
endif
ifstr $(ODIDefaultSlot) != ""
set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot))
endif
ForListDo $(ODIDriverAdditionalParms)
ifstr $($) != ""
set ODIParmList = >($(ODIParmList), $($))
endif
EndForListDo
ForListDo $(ODICustomList)
ifstr $($) != ""
set ODIParmList = >($(ODIParmList), $($))
endif
EndForListDo
Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) +
$(AdapterNumber) $(ODIParmList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Set ErrorString = $($R0)
Ifstr(i) $(ErrorString) != NO_ERROR
EndWait
goto fatalregistry
Endif
Ifstr(i) $(PromptForSrcRouting) == "TRUE"
Shell $(NwSubsInf) NwConfigureSourceRouting
Endif
Ifstr(i) $(!NTN_InstallMode) == install
; Open the driver key to add the busNumber, busType, HIN,
;and slotNumber
set KeyToFind = +
$(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) +
DriverKey
set NewValueList = +
{{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(NTBusType)},+
{HIN,$(NoTitle),$(!REG_VT_DWORD),1},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}}
Shell $(UtilityInf), AddValueList, $(DriverKey), $(NewValueList)
CloseRegKey $(DriverKey)
Set OdiAdapterInstalledOkay = "1"
Endif
ifstr(i) $(CurrentInstallMode) == configure
goto endwriteparameters
endif
endif
EndForListDo
endwriteparameters = +
CloseRegKey $(KeyParameters)
EndWait
goto successful
bindingadapter =+
set Error = $(BindingError)
goto fatal
removeadapter = +
Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: Shell Error NwRemoveAdapter "$($ShellCode)
Endif
Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(ClientProvider)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Ifstr(i) $(RegistryErrorIndex) == "SHELL_CODE_ERROR"
goto ShellCodeError
Endif
goto fatalregistry
Endif
goto end
UpgradeSoftware = +
Ifstr(i) $(DoCopy) == "YES"
Ifstr(i) $(SrcDir) == ""
; Get source location
Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto end
Endif
Set SrcDir = $($R1)
Endif
Endif
install "Install-Option"
Ifstr(i) $(DoConfig) == "YES"
goto configureadapter
else
goto end
endif
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(ClientProvider) $($)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(Function$(Option)Title)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
; Ifstr(i) $(OdiAdapterInstalledOkay) == "1"
; Shell $(NwSubsInf) GetOdiAdapterList
; ifint $($R3) < 2
; Set DlgType = "MessageBox"
; Set STF_MB_TITLE = "NetWare ODI LAN Drivers Setup"
; Set STF_MB_TEXT = "The NetWare ODI Adapter was successfully installed. "+
; "Your NetWare installation is COMPLETE."
; Set STF_MB_TYPE = 1
; Set STF_MB_ICON = 2
; Set STF_MB_DEF = 1
; ui start "Error Message"
; Endif
; Endif
; Check if ODINSUP needs to be installed
Shell $(NwSubsInf), CheckIfODINSUPIsNeeded
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionKeyFileToCopyList $(Option) DriverName $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
;[Install-Update]
; set STF_VITAL = ""
; set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;
; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
; AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
;
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
;
; exit
[Source Media Descriptions]
1 = $(NetWareODILANDriversDisk)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[ChoicesNamesList]
"AutoDetect", "Auto Detect Media", "AutoDetectMediaConnected"
"TP", "TP (RJ-45 Connector)", "RJ45Connector"
"BNC", "BNC Connector", "BNCConnector"
"TP_Full_Duplex", "Full Duplex Mode", "TPFullDuplexMode"
"Line_Speed", "Line Speed", "LineSpeed"
[ODIListNamesSection]
List1
List2
List3
List4
List5
List6
[KeyOnlyList]
Num1 = $(Present)
Num2 = $(NotPresent)
[Line_SpeedList]
Num1 = $(NotPresent)
Num2 = 100
Num3 = 10
[DefaultParameterLists]
KeyOnlyList
Line_SpeedList
[Options]
ODI_HPTX
[ODI_HPTX]
Title = "HP 10/100TX PCI LAN"
DriverName = 1, HPTX.LAN
MediaType = "ETHERNET"
CardType = "PCI"
CardId = 4649 ;1229h
Vendor = 32902 ;8086h
Custom = {}
List1 = "SPEED" , "Speed" , "0", { "0", "10", "100"}
List2 = "FORCEDUPLEX" , "ForceDuplex", "0", {"0", "1", "2"}
CanShareSlot = "NO"
[Strings]
; Every string that is in quotes from this point to the end of the
; file will be pulled out and put into the translation teams database.
; There parser looks for the section [Strings] and then goes to the
; end of the file. DO NOT put strings below this point in the file
; that should not be translated. Likewise, all strings that need to
; be translated should be in quotes and below this point in the file.
[ODIStringsENG]
AdapterForNetWare = " Adapter for NetWare"
NetWareForWindowsNT = "NetWare for Windows NT"
Present = "Present"
NotPresent = "Not Present"
NetWareODILANDriversDisk = "NetWare ODI LAN Drivers Disk"
BindingError = "Binding: Sorry, not yet implemented."
[DialogConstantsENG]
Help = "&Help"
;Exit = "&Cancel"
OK = "OK"
HelpContext = ""
Continue = "&Continue"
Cancel = "&Cancel"
Advanced = "&Advanced"
IDH_NETWAREWRKSTATIONPARMS = 901
IDH_NETWAREIPXBIND = 902
IDH_IPXSPXPARMS = 903
IDH_NETWORKPROTOCOL = 904
IDH_NETWAREODISETTINGS = 905
IDH_NETWARECLIENTINSTALL = 906
IDH_NETWARENDISODI = 907
IDH_NODEADDRESSOVERIDE = 908
IDH_RESMGRCONFIG = 951
[LANDriverDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "List"$(ODINumberofDriverLists)
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = $(IDH_NETWAREODISETTINGS)
[NoParmsENG]
DlgType = "RadioCombination"
DlgTemplate = "NO_PARAMETERS"
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = ""
CBOptionsGreyed = {}
ComboListItemsIn = {}
ComboListItemsOut = {}
NotifyFields = {}
[AdvancedDialogENG]
DlgType = "RadioCombination"
Caption = "Advanced Settings"
EditTextIn = $(ODINodeAddress)
EditTextLim = 13
CBOptionsGreyed = {}
HelpContext = $(IDH_NODEADDRESSOVERIDE)
NotifyFields = {}
[FileConstantsENG]
ProCaption = "NetWare ODI LAN Drivers Setup"
ProCancel = "Cancel"
ProCancelMsg = "NetWare for Windows NT is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.