3 Windows 95
v1.06
Windows* 95 installation notes
========================================================================
LOCATION OF DRIVER: \NT\HPTX.SY_ (compressed)
LOCATION OF SETUP FILE: \NET82557.INF
General Instructions
--------------------
1 Install the adapter in the computer and turn on the power. Have the
Windows 95 CD ROM available, as you will need it to copy additional
files. While Windows 95 is starting, it will detect the new hardware.
2 When Windows 95 starts, a NEW HARDWARE FOUND dialog box appears. It
identifies the adapter as a PCI Ethernet Controller. Select the
option "Driver from disk provided by Hardware Manufacturer".
NOTE: If the New Hardware Found dialog box doesn't appear, you'll need
to manually configure the adapter. See the section on
alternative ways to add a network adapter to Windows 95.
3 Insert the Support Disk for J3171A in drive A and click OK.
4 A dialog box prompts for a location with "A:\". Click OK.
5 A dialog may appear requesting Windows 95 system network files. If so,
follow the instructions.
Note: The Windows 95 system files are typically available on the
Windows 95 CD in the win95 directory (D:\win95). If Windows
95 requests the HPTX.DOS file, it can be found on the
Support Disk for J3171A, typically in A:.
6 The Systems Setting Change dialog appears indicating you should
restart the system for changes to become effective. Remove the
HP 10/100TX adapter disk from the drive and click Yes for the changes
to take effect.
NOTE: Windows 95 will reference this adapter's driver as "82557-
based PCI Ethernet" not "HP 10/100TX adapter".
Installing HPSet adapter diagnostic and configuration software
-----------------------------------------------------------------------
HPSet software allows you to test the adapter in the Windows 95
environment. It can also resolve some Windows 95 issues that may result
from changing or updating adapter hardware.
1 From the Explorer, double click on the 3.5 floppy disk icon. The
Explore function can be accessed by clicking on the Windows 95 Start
button with the right mouse button.
2 Locate the HPSet icon in the root directory of the diskette and click
the right mouse button. From the menu that appears, click Install.
3 When the HPSet software has been copied to your computer, go to the
control panel and click on the HPSet icon. HPSet examines your
computer and displays the HPSet Window. This window shows the
adapter's I/O address, interrupt and Ethernet address.
Note: The adapter's interrupt is set by the computer's BIOS. If you
have to change the interrupt, some computers allow you to change
this setting, and some don't. Check your computer's
documentation for details. HPSet will inform you of any
problems with the current setting.
4 Click Test to begin diagnostics.
Advanced Configuration Parameters
---------------------------------
The defaults work correctly for most configurations. Please use caution
when changing these parameters. To make a change, follow the steps
listed below.
Note: Be sure to use HPSet to configure these settings rather than the
Advanced Configuration tab under Properties. Since this driver also
supports all 82557-based adapters, some parameters have different
values depending on which adapter is installed. HPSet will
display the proper values for the adapter you are configuring. The
Properties screen may not.
1 Double-click on the HPSet icon located in the Control Panel.
2 Click on Change button.
3 If you need to make changes to Speed and/or you are using a full
duplex hub, change these options on the Basic Settings menu.
4 Click on Advanced.
5 For the highlighted Property on the left, the Value is displayed on
the right.
Duplex Mode - Default Setting: Auto Duplex Detect
A performance option that lets you choose how the adapter sends and
receives packets over the network. A regular adapter can perform only
one operation at a time (half-duplexing). The HP 10/100TX adapter has the
ability to send and receive packets at the same time (full-duplexing).
In order to reap the benefits of full duplexing, you MUST have a full
duplex switch.
HP 10/100TX adapter: Supports auto-negotiate, full
and half duplex at 10 or 100 Mbit/s.
Auto Duplex: The adapter negotiates with the hub how to send/receive
packets, either full or half duplex. You must use a hub that
supports Auto-negotiation (also known as Nway)
Full Duplex: The adapter sends and receives packets at the same time.
This improves the performance of your adapter. Set duplex mode to
full duplex ONLY if you have a full duplex hub.
Half Duplex: The adapter performs one operation at a time. It either
sends or receives.
Note: If you select Full duplex you must manually set the Speed parameter
to 100. Do not leave speed set to auto-detect.
The HP 10/100TX adapter has the added ability to "talk" to the hub and
determine at which mode to communicate (either full or half duplex). This
is called auto-negotiation. You must have an auto-negotiating hub (an
NWay* hub) to get full duplex support with the Duplex mode set to Auto
Duplex Detect. If you don't have an auto-negotiating hub, set Duplex mode
to Full Duplex and if you are operating at 100 Mbit/s, you must set the
Speed parameter to 100. Auto-speed detect will not work at 100 Mbit/s.
Coalesce Buffers - Recommended setting: 8
Number of memory buffers available to the driver in case the driver
runs out of available Map Registers. This packet area is also used
when a packet consists of many fragments.
Map Registers - Recommended Setting: 64
Map registers are system resources used in physical to virtual address
conversion with bus mastering cards. The Map Registers parameter
specifies how many registers should be allocated to the driver.
Receive Buffers - Recommended setting: 16
Specifies the number of buffers used by the driver when copying data
to the protocol memory.
Transmit Control Blocks - Recommended setting: 16
Specifies how many transmit control buffers the driver allocates for
adapter use. This directly corresponds to how many outstanding
packets the driver can have in its "send" queue.
Speed - Default setting: Auto Detect
This parameter lets the HP 10/100TX adapter know what speed
to use on the Ethernet wire. The choices are 10 Mbit/s, 100 Mbit/s, and
Auto Detect. In Auto Detect mode, the adapter detects if its
environment can support 100 Mbit/s speed. It then sets the speed to 100
if it can, or 10 if it can't. If you are using a crossover cable
connected to another adapter, set the speed to either 10 Mbit/s or 100
Mbit/s.
Alternatives for adding network cards to Windows 95
---------------------------------------------------
Windows 95 automatically detects Plug and Play devices when they are
added to the system, and either loads drivers for the new device, or
prompts the user for the location of the drivers. However, this feature
does not work the same on all computers and with all cards.
This text provides alternatives for adding drivers for newly installed
hardware. One of these should work in cases where the general
instructions above don't work.
Some of these methods arrive at the same dialog boxes, but yield
different results because of the path taken.
Control Panel ... SYSTEM (Recommended Method)
--------------------------------------------
1 Double-click My Computer.
2 Double-click Control Panel.
3 Double-click System.
4 Click the Device Manager tab.
5 Double-click Other Devices (question mark icon).
6 Double-click PCI Ethernet Controller.
7 Click the Driver tab.
8 Click Change Driver.
9 Select Network Adapters and click OK.
10 Click Have Disk, insert the Support Disk for J3171A
in the appropriate drive, and click OK.
If you get into Device Manager and do not have an Other Devices icons
in the device list, Windows 95 did not detect your card at all. This
condition indicates a problem with the adapter itself, or with the
system BIOS, rather than a Windows 95 Plug and Play problem.
Control Panel ... Add New Hardware
----------------------------------
1 Double-click My Computer.
2 Double-click Control Panel.
3 Double-click Add New Hardware.
4 Click Next.
5 Select the No option and click Next.
6 Select Network Adapters and click Next.
7 Click Have Disk, insert the Support Disk for J3171A
in the appropriate drive, and click OK.
8 Select the 82557-based adapter and click OK.
9 Click Next and click Finish.
Control Panel ... Network
-------------------------
1 Double-click My Computer.
2 Double-click Control Panel.
3 Double-click Network.
4 Click the Add button.
5 Select Adapter and click Add.
6 Click Have Disk, insert the Support Disk for J3171A
in the appropriate drive, and click OK.
Hints and Tips
--------------
1. Multiple Adapters in Windows 95:
If you have multiple HP 10/100TX adapters installed in the system, be
sure to install and run HPSet. It will automatically detect that you
have multiple adapters and update the EID (Ethernet ID) field, which
is required by Windows 95 for card identification.
Background: If multiple network adapters are installed in a Windows 95
system, each card must be identified by the last 8 digits of the
Ethernet address. However, Windows 95 requires decimal numbers which
makes it necessary to perform a hex to decimal conversion. For
example, an adapter with the Ethernet address of 00AA00123456 would
require putting 1193046 as the Ethernet ID value (00123456 converted
to decimal is 1193046). Windows calculator, in scientific mode, is a
tool you can use for the conversion if you need to do the conversion
manually.
2. Windows 95 Push Installation:
HP has created some support files and readme information in an
archive name HPPUSH.EXE to help with Windows 95 push installations
using the HP 10/100TX adapter. Download HPPUSH.EXE by visiting the
support web (see the Customer Support Readme file).
3. Using NDIS 2 driver and Full Duplex:
Installing the NDIS 2 driver through Windows 95 does not properly set
the driver to Full Duplex. In order for you to use Full Duplex with
HPTX.DOS, you must edit the PROTOCOL.INI file in the Windows 95
directory to include:
[HPTX_NIF]
Drivername = HPTX$
FORCEDUPLEX = 2
4. Moving adapters to different slots:
When removing a PCI adapter and placing it in a different slot,
Windows 95 retains the old instance of the driver and adds a new one
for the new slot/card combination. This behavior is common to any
adapter. The driver stops functioning when the number of accumulated
old drivers reaches 2 (for a total of 3 installed drivers, including
the current driver). The workaround is to remove the old driver
before changing slots, or to run HPSet and allow it to associate the
card with the appropriate instance of the driver.
5. Swapping 82557-based adapters in the same slot.
In order for Windows 95 to properly recognize a different 82557-based
adapter in the same slot, the EID must be updated. This update can be
achieved in a few different ways. Perform one of the following items
for the update to happen.
- The easiest method is to run HPSet after swapping the adapters.
- Or, remove the adapter by performing a Remove Device in the Device
Manager or Remove Adapter in Network Control Panel. Then, shut down
the computer and install the other 82557-based adapter.
- Or, shut down the computer, remove the adapter, turn on the
computer and start Windows 95 without any adapter. At this point,
Windows 95 detects that the adapter was removed and deletes the
obsolete registry entries. Shut down the computer, install the
adapter, start Windows 95, and perform a regular adapter
installation.
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.