Hardware specifications
v1.02
Specifications for HP J3171A PCI Adapter
============================================================
System compatibility
--------------------
PCI systems
Media (Cable) connectors and wiring
-----------------------------------
Use Category 5 cabling at 100 Mbit/s
This model supports 100Base-TX standard
Data Rate mode
--------------
10 or 100 Mbit/s
Interrupt levels
----------------
PCI: INTA
SRAM Transmit/Receive Buffer
----------------------------
16 Kbytes
Power requirements
------------------
1.0 Amp @ +5 V
Isolation voltage
-----------------
200V RMS
Operating temperature
---------------------
0 - 55 degrees C
Humidity
--------
15% - 95% non-condensing
Diagnostic LEDs
--------------
Activity
Link
100 Mbit/s
Diagnostic software
-------------------
On-board
On-network
Responder
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.