File: lanman.txt
3Com Corporation
3Com Megahertz 10/100 LAN + 56K Modem PC Card
(3CCFEM556 PC Card family)
============================================================
This file contains setup information for Microsoft LAN Manager versions 2.0, 2.1, and 2.2.
This file includes the following topics:
- General Information
- DOS Installation with LAN Manager 2.2
- SYSTEM.INI Information
============================================================
General Information
-------------------
Installation Disk 2 contains a subdirectory structure and
files that make it an OEM import disk for the LAN Manager
installer. Use the import function of the LAN Manager
installer to capture the NDIS driver from Installation Disk
2. Be sure to save the new configuration before exiting the
installer.
NOTE: Although the driver name is FEM556N2.DOS, the
internal driver name (used in PROTOCOL.INI) is
FEM556$
============================================================
DOS installation with LAN Manager 2.2
-------------------------------------
The following describes the procedure for importing the
driver during installation of Lan Manager 2.2 for DOS.
1. Begin the MS-DOS Lan Manager installation by
inserting the MS-DOS Setup diskette and
typing A:SETUP.
2. After reading the Microsoft Drivers 1 diskette,
a window is displayed showing available Network
Adapter Drivers. In this window choose the
following function:
Select Other Driver (Alt-D)
3. When prompted to insert your network driver
diskette, insert Installation Disk 2.
4. After the driver is imported from Installation Disk
2, a box will be displayed showing the driver. Select
the "3Com Megahertz 10/100 LAN + 56K Modem PC Card"
driver.
5. Continue with the remainder of the installation
by next selecting a protocol to use with the
"3Com Megahertz LAN 10/100 + 56K Modem PC Card" driver.
=========================================================
SYSTEM.INI information
----------------------
In order for the modem to function correctly in MS Windows,
add the following commands to your Window's SYSTEM.INI file
under the [386Enh] category: (In case they are not there
already)
[386Enh]
COM1Base=3F8
COM1Irq=4
COM2Base=2F8
COM2Irq=3
COM3Base=3E8
COM3Irq=4
COM4Base=2E8
COM4Irq=3
(%ver lanman.txt v1.0)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.