NETMHZ.INF Driver File Contents (mhzwin95.exe)

;********************************************************************
; Megahertz PCMCIA NetCard Install
; Author: tscribne
;
; Copyright (c) 1995, Megahertz Corporation
;********************************************************************


[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Provider=%MS%
Class=Net

[Manufacturer]
%MHZ% = MHZ

[MHZ]
%MHZ2%=MHZ2.ndi,PCMCIA\MEGAHERTZ-CC10BT/2-BF05
%MHZ3%=MHZ3.ndi,MF\MHZ_DEV0
%MHZ4%=MHZ4.ndi,MF\MHZ_DEV2
%MHZ5%=MHZ5.ndi,MF\MHZ_DEV4
%MHZ6%=MHZ6.ndi,MF\MHZ_DEV6
%MHZ7%=MHZ7.ndi,PCMCIA\MEGAHERTZ-ETHERNET_ADAPTOR-DFC9

;********************************************************************
;
;********************************************************************
[SourceDisksNames]
42 = %Disk_42_Desc%,,0

[SourceDisksFiles]
MHZC92.vxd=42,,25146
netmhz.inf=42,,9940

[DestinationDirs]
MHZ.CopyINF = 17
MHZ.CopyVXD = 11

[MHZ.CopyINF]
netmhz.inf

[MHZ.CopyVXD]
MHZC92.vxd


;********************************************************************
;*
;********************************************************************

[MHZ2.ndi]
AddReg=ADDREG.ndi.reg,2.ndi.reg,override2.ndi.reg
CopyFiles=MHZ.CopyINF,MHZ.CopyVXD

[MHZ3.ndi]
AddReg=ADDREG_1.ndi.reg,MHZ3.ndi.reg,ADDREG_MHZ.ndi.reg

[MHZ4.ndi]
AddReg=ADDREG.ndi.reg,MHZ4.ndi.reg,ADDREG_MHZ.ndi.reg

[MHZ5.ndi]
AddReg=ADDREG.ndi.reg,MHZ5.ndi.reg,ADDREG_MHZ.ndi.reg

[MHZ6.ndi]
AddReg=ADDREG.ndi.reg,MHZ6.ndi.reg,ADDREG_MHZ.ndi.reg

[MHZ7.ndi]
AddReg=ADDREG.ndi.reg,3.ndi.reg,override3.ndi.reg
CopyFiles=MHZ.CopyINF,MHZ.CopyVXD



[ADDREG.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,MHZC92.vxd
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"MHZC92"
HKR,NDIS,MajorNdisVersion,HEX,03
HKR,NDIS,MinorNdisVersion,HEX,0A

; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"

HKR,Ndi,CardType,,"PCMCIA"

; Parameters
HKR,,IOBase,1,02,00,00,00
HKR,,Interrupt,1,04,00,00,00
HKR,,MemoryBaseAddress,1,01,00,00,00

; NetworkAddress
HKR,NDI\params\NetworkAddress,ParamDesc,,"Network Address"
HKR,NDI\params\NetworkAddress,type,,edit
HKR,NDI\params\NetworkAddress,LimitText,,18
HKR,NDI\params\NetworkAddress,UpperCase,,1
HKR,Ndi\params\NetworkAddress,default,,""
HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00
HKR,Ndi\params\NetworkAddress,optional,,1

; AdapterType
HKR,Ndi\params\Transceiver,ParamDesc,,"Connector Type"
HKR,Ndi\params\Transceiver,default,,"10BaseT"
HKR,Ndi\params\Transceiver,type,,enum
HKR,Ndi\params\Transceiver\enum,"10BaseT",,"Twisted Pair (10BASE-T)"
HKR,Ndi\params\Transceiver\enum,"10Base2",,"Thin Coax (10BASE2)"
HKR,Ndi\params\Transceiver,flag,1,20,00,00,00

[ADDREG_1.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,MHZC92.vxd
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"MHZC92"
HKR,NDIS,MajorNdisVersion,HEX,03
HKR,NDIS,MinorNdisVersion,HEX,0A

; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"

HKR,Ndi,CardType,,"PCMCIA"

; Parameters
HKR,,IOBase,1,02,00,00,00
HKR,,Interrupt,1,04,00,00,00
HKR,,MemoryBaseAddress,1,01,00,00,00

; NetworkAddress
HKR,NDI\params\NetworkAddress,ParamDesc,,"Network Address"
HKR,NDI\params\NetworkAddress,type,,edit
HKR,NDI\params\NetworkAddress,LimitText,,18
HKR,NDI\params\NetworkAddress,UpperCase,,1
HKR,Ndi\params\NetworkAddress,default,,""
HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00
HKR,Ndi\params\NetworkAddress,optional,,1

[2.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\MEGAHERTZ-CC10BT/2-BF05"
HKR,Ndi\Install,ndis3,,"mhzc92.ndis3"

[3.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\MEGAHERTZ-ETHERNET_ADAPTOR-DFC9
HKR,Ndi\Install,ndis3,,"mhzc92.ndis3"

[MHZ3.ndi.reg]
HKR,Ndi,DeviceID,,"MF\MHZ_DEV0"
HKR,Ndi\Install,ndis3,,"mhzc92.ndis3"

[MHZ4.ndi.reg]
HKR,Ndi,DeviceID,,"MF\MHZ_DEV2"
HKR,Ndi\Install,ndis3,,"mhzc92.ndis3"

[MHZ5.ndi.reg]
HKR,Ndi,DeviceID,,"MF\MHZ_DEV4"
HKR,Ndi\Install,ndis3,,"mhzc92.ndis3"

[MHZ6.ndi.reg]
HKR,Ndi,DeviceID,,"MF\MHZ_DEV6"
HKR,Ndi\Install,ndis3,,"mhzc92.ndis3"




[ADDREG_MHZ.ndi.reg]
HKR,,AdapterType,,3
HKR,,MemoryBaseAddress,1,01,00,00,00

;****************************************************************************
; Add these keys to the registry for MHZ adapters
;****************************************************************************

[override2.ndi.reg]
; OVERRIDE FOR 16K RAM WINDOW
HKR,Override,0000,1,\
;
00,04,00,00, \      		; CONFIGMG_VERSION
00,00,00,00, \      		; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \      		; Total length of I/O Resource Descriptor
02,00,00,00, \      		; ResType_IO = 0x00000002
01,00, \       			; IOD_Count;
0C,00, \       			; IOD_Type;         // IOType_Range = 0x000C
00,00, \       			; ;IOD_Alloc_Base;
00,00, \       			; IOD_Alloc_End;
00,00, \       			; IOD_DesFlags;
00, \               		; IOD_Alloc_Alias;
00, \               		; IOD_Alloc_Decode;
E0,FF, \       			; IOR_Align;        // Mask for base alignment
10,00, \       			; IOR_nPorts;       // Number of ports
00,01, \       			; IOR_Min;          // Min port address
7F,03, \       			; IOR_Max;          // Max port address
00,00, \       			; IOR_RangeFlags;   // Flags
00, \               		; IOR_Alias;        // Alias offset
00, \               		; IOR_Decode;       // Address specified
45,00,00,00, \      		; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \      		; Total length of IRQ Resource Descriptor
04,00,00,00, \      		; ResType_IRQ = 0x00000004
00,00, \       			; IRQD_Flags;
00,00, \       			; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \       			; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \       			; IRQD_Reserved;
70,00,00,00, \      		; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 0
;
34,00,00,00, \      		; Total length of Memory Resource Descriptor
01,00,00,00, \      		; ResType_Mem = 0x00000001
01,00, \       			; MD_Count;
14,00, \       			; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      		; MD_Alloc_Base;
00,00,00,00, \      		; MD_Alloc_End;
00,00, \       			; MD_Flags;
00,00, \       			; MD_Reserved;
00,F0,FF,FF, \      		; MR_Align;         // Mask for base alignment
00,10,00,00, \      		; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      		; MR_Min;      // Min Address
FF,FF,FF,FF, \      		; MR_Max;      // Max Address
00,00, \       			; MR_Flags;         // Flags
00,00, \       			; MR_Reserved;
02,00,00,00, \      		; PCCARD flags, 0x02 = attribute mem, or
				;         0x08 = 16-bit common mem
00,00,00,00, \      		; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \      		; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \      		; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \       			; Socket;
02,00, \       			; Attributes;
32, \               		; Vcc;
32, \               		; Vpp1;
32, \               		; Vpp2;
02, \               		; IntType;
00,03,00,00, \      		; ConfigBase;
00, \               		; Status;
00, \               		; Pin;
00, \               		; Copy;
01, \               		; ConfigIndex;
01, \               		; Present;
;
00,00,00,00         		; TERMINATOR

[override3.ndi.reg]
; OVERRIDE FOR 16K RAM WINDOW
HKR,Override,0000,1,\
;
00,04,00,00, \      		; CONFIGMG_VERSION
00,00,00,00, \      		; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \      		; Total length of I/O Resource Descriptor
02,00,00,00, \      		; ResType_IO = 0x00000002
01,00, \       			; IOD_Count;
0C,00, \       			; IOD_Type;         // IOType_Range = 0x000C
00,00, \       			; ;IOD_Alloc_Base;
00,00, \       			; IOD_Alloc_End;
00,00, \       			; IOD_DesFlags;
00, \               		; IOD_Alloc_Alias;
00, \               		; IOD_Alloc_Decode;
E0,FF, \       			; IOR_Align;        // Mask for base alignment
10,00, \       			; IOR_nPorts;       // Number of ports
00,01, \       			; IOR_Min;          // Min port address
7F,03, \       			; IOR_Max;          // Max port address
00,00, \       			; IOR_RangeFlags;   // Flags
00, \               		; IOR_Alias;        // Alias offset
00, \               		; IOR_Decode;       // Address specified
45,00,00,00, \      		; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \      		; Total length of IRQ Resource Descriptor
04,00,00,00, \      		; ResType_IRQ = 0x00000004
00,00, \       			; IRQD_Flags;
00,00, \       			; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \       			; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \       			; IRQD_Reserved;
70,00,00,00, \      		; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 0
;
34,00,00,00, \      		; Total length of Memory Resource Descriptor
01,00,00,00, \      		; ResType_Mem = 0x00000001
01,00, \       			; MD_Count;
14,00, \       			; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      		; MD_Alloc_Base;
00,00,00,00, \      		; MD_Alloc_End;
00,00, \       			; MD_Flags;
00,00, \       			; MD_Reserved;
00,F0,FF,FF, \      		; MR_Align;         // Mask for base alignment
00,10,00,00, \      		; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      		; MR_Min;      // Min Address
FF,FF,FF,FF, \      		; MR_Max;      // Max Address
00,00, \       			; MR_Flags;         // Flags
00,00, \       			; MR_Reserved;
02,00,00,00, \      		; PCCARD flags, 0x02 = attribute mem, or
				;         0x08 = 16-bit common mem
00,00,00,00, \      		; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \      		; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \      		; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \       			; Socket;
02,00, \       			; Attributes;
32, \               		; Vcc;
32, \               		; Vpp1;
32, \               		; Vpp2;
02, \               		; IntType;
00,03,00,00, \      		; ConfigBase;
00, \               		; Status;
00, \               		; Pin;
00, \               		; Copy;
01, \               		; ConfigIndex;
01, \               		; Present;
;
00,00,00,00         		; TERMINATOR



;********************************************************************
; Stuff for copying files
;********************************************************************
[mhz.ndis3]
CopyFiles=mhz.ndis3.CopyFiles

[mhz.ndis3.CopyFiles]
MHZC92.vxd

[DestinationDirs]
DefaultDestDir = 11
mhz.ndis3.CopyFiles = 11


[Strings]
MS="Microsoft"
MHZ="Megahertz"
MHZ2="Megahertz CC10BT/2 Ethernet Driver"
MHZ3 = "Megahertz EM1144T Multi-function (Network Interface)"
MHZ4 = "Megahertz XJEM1144 Multi-function (Network Interface)"
MHZ5 = "Noteworthy NWCOMB01 PCMCIA Ethernet Modem (Network Interface)"
MHZ6 = "Megahertz CCXJEM3288 Multi-function (Network Interface)"
MHZ7 = "Megahertz LAN-T Ethernet Adapter"


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 2.06