readme.txt Driver File Contents (winntdrv.exe)

U.S. Robotics Mobile Communications                   Customer Support 
======================================================================

Title :  WINNTDRV.TXT, Drivers For NT 
Date  :  05 June 1997
Scope :  All Of Our Ethernet Adapters and Ethernet Modems

----------------------------------------------------------------------

Purpose
-------
Use this README as you set up your Ethernet Modem or Adapter in
Windows NT, using WINNTDRV. This README has these sections: 

     Files In WINNTDRV, 
     Install Ethernet In NT 3.51, 
     No Modem Installation In NT 3.51, 
     Install Ethernet In Windows NT 4.0, 
     Install Your Modem In NT 4.0. 

Files In WINNTDRV
-----------------

Here are the contents of WINNTDRV.EXE, in addition to this README.

     MHZC9X.SYS
     MHZC9X.DLL
     OEMSETNT.INF
     MHZC9X.HLP
     MHZNCDET.DLL
     MDMMHZA.INF

Install In Windows 3.51
-----------------------
Follow the guidelines in this section to install your Ethernet Modem or 
Adapter in Windows NT 3.51. There are a five parts of this process: 

     Service Pack 5, 
     Prepare To Use WINNTDRV, 
     Use WINNTDRV, 
     Configure Network & Protocols, 
     Choose Domain or Workgroup. 

Note
----
We did not design our 14.4 Ethernet Modems to be compatible with NT 3.5x. 

Service Pack 5
--------------
If you are installing an Ethernet Modem or Adapter in Windows NT 3.51 then
our Applications Engineers recommend that you should install Microsoft's NT
3.51 Service Pack 5. 

Prepare To Use WINNTDRV
-----------------------
  1.  Log into NT, select Control Panel from the Main group
      and double-click on Network. 
  2.  You will be asked if you want to install the network now? Click Yes. 
  3.  Type the path for your Windows NT 3.51 diskettes or CD and click Enter. 
  4.  The network Adapter Dialog box will appear. Click on 
      Do Not Detect:Continue. 
  5.  From the Add Adapter dialog box, select Other: Requires disk from
      manufacturer which is at the bottom of the drop-down list box;
	  click Continue. 

Use WINNTDRV
------------
  1.  Insert the disk that you made of WINNTDRV.EXE into your disk drive. 
  2.  Change the path to a:\ and click OK. 
  3.  Highlight your PC Card and click OK. 
  4.  PC Card Setup will appear. Ensure that the values listed are correct
      for your system by consulting with your
      system's documentation or your network system administrator. 
  5.  Use the drop-down list boxes to select new values. Click Continue. 

Configure Network & Protocols
-----------------------------
  1.  Select the services and protocols you require for your network in
      Windows NT Setup. These settings are available in your NT manuals
	  or from your network administrator. 
  2.  Click Continue and insert your NT installation diskettes or your CD 
      into the drive as needed. Network Settings will appear. 
  3.  Networks and Workgroups buttons are grayed out during this process.
      After you restart your system, you will be able to access these
	  two areas. You cannot configure the card settings in Network Settings
	  until you restart. Click OK. Do not restart your system at this point. 
  4.  A network setup warning will appear saying network unable 
      to start. Click OK. 
  5.  You will be asked if you want to reconfigure your Ethernet
      Modem. Click No. 

Choose Your Domain or Your Workgroup
------------------------------------
  1.  After you have followed the last step of the previous section, you
      will see Domain/Workgroup Settings. Enter these values and click OK.
	  These values are available from your network administrator. 
  2.  When the Restart screen appears, click Restart. 

No Modem Installation In NT 3.51
--------------------------------
If you have an Ethernet Modem then there are no further installation steps.
There are no seperate modem drivers to set up. 

Install In Windows NT 4.0
-------------------------
Follow these guidelines as you install your Ethernet Modem or Adapter in
Windows NT 4.0. There are four parts to this process: 

*  Network Setup Wizard,
*  Standard Installation,
*  New Installation,
*  and Install Your Modem.

Network Setup Wizard
--------------------
  1.  Start Windows NT 4.0 with your Ethernet Modem or Terminal Adapter
      inserted in the PC Card Slot that you will be using. 
  2.  After logging into NT 4.0, click Start:Settings:Control Panel and then
      double-click Network. 
  3.  Unless your system is "out of the box" new, go to the next section
      of this README. If you have never had any other services, protocols or
	  adapters before then skip the next section. 

Standard Installation
---------------------
These are the standard steps that you will follow as you install your
PC Card in a system that's already up and running.  In this case,
you have already installed any services, protocols or adapters. 

  1.  Select the Adapters tab. 
  2.  Click Add:Have Disk. 
  3.  Insert the disk that you made of WINNTDRV and assure that the path
      that NT is pointed to is a:\. Click OK. 
  4.  Pick your Ethernet Modem or Ethernet Adapter from the list that is
      presented and click OK. Here are two exceptions: 

          *  If your PC Card is EM1144T, CCEM1144 or XJEM1144
		     then choose our XJEM3288. 

          *  If your PC Card is an XJ10BT/C then choose CC10BT/2. 

  5.  A PC Card Setup screen will appear. Indicate the Interupt Request
     (IRQ), Input/Output(I/O) Port,Communications (COM) Port, Memory Range
	 (or window) and Media Type based on information listed in NT
      Diagnostics or in your system documentation. 
  6.  Select Services and Protocols tabs to configure networks based on the
      information your network administrator gave you. 
  7.  Click Close and NT 4.0 will bind protocols and services to your
      adapter.  It may prompt you for your NT 4.0 CD or diskette. 
  8.  Remove the diskette containing WINNTDRV and click Yes to Restart
      your system. Do this with the PC Card inserted. 

New Installation
----------------
Follow these steps if you have never installed any services, protocols or
adapters before. 

  1.  You will be asked if you want to "install the network now?" Click Yes. 
  2.  Respond to the prompts that the NT 4.0 Network Setup Wizard will present
      and then click Next. 
  3.  When you are prompted for Network Adapters, click
      Select From List:Have Disk. 
  4.  Insert the disk that you made of WINNTDRV and assure that the path that
      NT is pointed to is a:\. Click OK. 
  5.  Pick your Ethernet Modem or Ethernet Adapter from the list that is presented
      and click OK. Here are two exceptions: 

          *  If your PC Card is EM1144T, CCEM1144 or XJEM1144 then
		    choose our XJEM3288. 

          *  If your PC Card is an XJ10BT/C then choose CC10BT/2. 

  6.  Select Next and then your network protocols and services. 

       *  If you are connecting to Novell Netware then pick
	      Client Service For Netware. It is not automatically loaded. 

  7.  Click Next and enter the path to Windows NT 4.0. Press Continue. 
  8.  A PC Card Setup screen will appear. Indicate the Interupt Request
     (IRQ), Input/Output(I/O) Port, Communications (COM) Port, Memory Range
	 (or window) and Media Type based on information listed in NT
      Diagnostics or in your system documentation. 
  9.  Click Continue and NT 4.0 will begin the process to install
      individual components. 
 10.  Respond to the prompts with information about your network's protocols
      and services. 
 11.  Remove the diskette containing WINNTDRV and click Yes to restart
      your system. 

Install Your Modem 
------------------
  1.  After logging into NT, select Control Panel and double click Modems.
      The install new modem wizard will appear.
  2.  Insert the diskette containing WINNTDRV and click Next. The wizard will
     detect your modem on an available COM Port. 

     Note 
	 ----
     NT 4.0 will automatically select your COM Port. If you would
	 like to change the COM Port then contact your system manufacturer
	 for help with your Basic Input Output System (BIOS) Configuration. 

  3.  Select Change:Have Disk and type a:\. 
  4.  Select your PC Card from the list that NT 4.0 will present. 
  5.  Click OK:Next:Finish.
  
=========================================================================
Copyright US Robotics Mobile Communications.  All other product names
are trademarks or registered trademarks of their respective holders in the
United States and/or in other countries.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.86