[MHZC922] ; PROTOCOL.INI entries for the Ethernet*Modem card. DriverName=MHZC92$ ; The following values must be specified if the enabler is ; used to configure the card. ; ; IOBASE is the base LAN I/O address ; INTERRUPT is the LAN interrupt (which is the actual hardware IRQ) ; MEMWINDOW is the (24-bit) address of the attribute memory window ; COMPORT is the modem comm port. ; ; Note: If using card and socket services, the comm port interrupt ; and the LAN interrupt must be the same. INTERRUPT=3 IOBASE=0x320 MEMWINDOW=0xD0000 COMPORT=2 ; The media type will depend on the type of network you will connect to. ; The types "10BASET" and "10BASE2" are possible. TRANSCEIVER=10BASETDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.