[MHZEM] ; PROTOCOL.INI entries for the Ethernet*Modem card. DriverName = "MHZEMX$" ; The following values must be specified if the enabler is ; used to configure the card. ; ; IOBase is the base LAN I/O address ; Interrupt is the LAN interrupt (which is the actual hardware IRQ) ; MemWindow is the (24-bit) address of the attribute memory window ; ComBase is the base serial port I/O address ; ComIRQ is the IRQ to reflect modem interrupts to IOBase = 0x320 Interrupt = 5 MemWindow = 0xD000 ComBase = 0x2F8 ComIRQ = 3 ; The media type will depend on the type of network you will connect to. ; The types "TENBASET" and "AUI" are possible. Media = "TENBASET" ; The amount of queueing space in the driver to process transmit requests ; may be specified. Values are in the range 1 to 40. The default is 1. MaxTransmits = 1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.