THE VIRTUAL TABLET INTERFACE
DIGITIZER TECHNOLOGY
VERSION 6.12
(January 30, 2007)
This document enumerates supported configurations for each digitizer. If your
tablet is not listed below, choose one that matches the active area and report
format of your digitizer. If you received an OEM Edition of the Virtual Tablet
Interface, only the tablets licensed by the OEM will be available from the list
below. For information on upgrading to the Professional Edition, please see the
Readme.Txt file or select General Overview from your Virtual Tablet program
group.
########################################################################
Some digitizers may require setting dip switches or soft menus for proper
operation. If in doubt about how to configure a particular digitizer, the
following rules of thumb are generally true for all digitizers supported by the
Virtual Tablet Interface:
Output Format: High resolution binary (ASCII not supported)
Origin: Lower-left
Resolution: Highest supported, typically 1000 lines per inch
Report Rate: Slow = 32, Medium = 64 and Fast = 96 at 9600 baud
Mode: Stream, continuous or run
Proximity: Send out-of-proximity reports
Baud: 9600 (except SummaPad, CadPro, Design and Creation
Stations)
Refer to the manual that came with your tablet and configure per the information
and notes below. Make sure your configuration is the one active each time the
digitizer is reset or powered-up, and the digitizer is turned on before starting
Windows.
Vendor Model Name Active Area Frame Format Type Note
====== ========== =========== ===== ====== ==== ====
AceCad AceCat 5"x5" 8,1,O MM 78
AceCad Advanced Series 12"x12" 8,1,O MM 119
AceCad Advanced Series 18"x12" 8,1,O MM 125
ALTEK AC or Datatab Series 12"x12" 8,1,N Format8 209 (26)
ALTEK AC or Datatab Series 18"x12" 8,1,N Format8 210 (26)
ALTEK AC or Datatab Series 22"x22" 8,1,N Format8 212 (26)
ALTEK AC or Datatab Series 22"x34" 8,1,N Format8 350 (26)
ALTEK AC or Datatab Series 24"x18" 8,1,N Format8 211 (26)
ALTEK AC or Datatab Series 24"x24" 8,1,N Format8 213 (26)
ALTEK AC or Datatab Series 28"x17" 8,1,N Format8 341 (26)
ALTEK AC or Datatab Series 36"x24" 8,1,N Format8 214 (26)
ALTEK AC or Datatab Series 48"x36" 8,1,N Format8 215 (26)
ALTEK AC or Datatab Series 60"x42" 8,1,N Format8 216 (26)
ALTEK AC or Datatab Series 60"x44" 8,1,N Format8 310 (26)
ALTEK AC or Datatab Series 80"x48" 8,1,N Format8 345 (26)
ALTEK AC or Datatab Series 90"x36" 8,1,N Format8 342 (26)
ALTEK AC or Datatab Series 90"x54" 8,1,N Format8 414 (26)
ALTEK AC or Datatab Series 90"x60" 8,1,N Format8 347 (26)
ALTEK AC or Datatab Series 100"x40" 8,1,N Format8 343 (26)
ALTEK AC or Datatab Series 120"x42" 8,1,N Format8 344 (26)
ALTEK AC or Datatab Series 120"x48" 8,1,N Format8 346 (26)
ALTEK AC or Datatab Series 120"x54" 8,1,N Format8 415 (26)
ALTEK AC or Datatab Series 120"x60" 8,1,N Format8 348 (26)
ALTEK AC or Datatab Series 144"x60" 8,1,N Format8 349 (26)
ALTEK DataFlex II Series 36"x30" 8,1,N Format8 309 (26)
ALTEK Datatab-DT Series 12"x12" 8,1,N Format8 318 (26)
ALTEK Datatab-DT Series 18"x12" 8,1,N Format8 319 (26)
ALTEK Z/I Imaging ImageStation 22"x34" 8,1,N Format8 351 (22)
ARISTO ARISTOGRID 0406 23.6"x16.8" 8,1,N EMT 394 (30)
ARISTO ARISTOGRID 0408 31.5"x16" 8,1,N EMT 395 (30)
ARISTO ARISTOGRID 0611 43.9"x22.3" 8,1,N EMT 396 (30)
ARISTO ARISTOGRID 0613 50.5"x24" 8,1,N EMT 397 (30)
ARISTO ARISTOGRID 0813 23.6"x29.5" 8,1,N EMT 398 (30)
ARISTO ARISTOGRID 0912 48"x36" 8,1,N EMT 399 (30)
ARISTO ARISTOGRID 1015 60"x40" 8,1,N EMT 400 (30)
ARISTO ARISTOhiGRID 0406 23.6"x16.8" 8,1,N HRBIN 401
ARISTO ARISTOhiGRID 0506 24"x20" 8,1,N HRBIN 402
ARISTO ARISTOhiGRID 0609 36"x24" 8,1,N HRBIN 403
ARISTO ARISTOhiGRID 0613 48"x24" 8,1,N HRBIN 404
ARISTO ARISTOhiGRID 0713 50"x30" 8,1,N HRBIN 405
ARISTO ARISTOhiGRID 0912 48"x36" 8,1,N HRBIN 406
ARISTO ARISTOhiGRID 1215 60"x48" 8,1,N HRBIN 407
ARISTO ARISTOproGRID 0827 106.3"x31.5" 8,1,N HRBIN 408
ARISTO ARISTOproGRID 0830 118.1"x31.5" 8,1,N HRBIN 409
ARISTO ARISTOproGRID 1218 73.2"x48" 8,1,N HRBIN 410
ARISTO ARISTOproGRID 1320 78.7"x51.2" 8,1,N HRBIN 411
ARISTO ARISTOproGRID 1525 98.4"x59.1" 8,1,N HRBIN 412
ARISTO ARISTOproGRID 1630 120.5"x63" 8,1,N HRBIN 413
ARISTO ARISTOTAB 0203 11.8"x8.3" 8,1,N EMT 391 (30)
ARISTO ARISTOTAB 0303 11.8"x11.8 8,1,N EMT 392 (30)
ARISTO ARISTOTAB 0304 16.5"x11.8" 8,1,N EMT 393 (30)
Calcomp 2000 Series 12"x12" 7,2,E Binary 123
Calcomp 2000 Series 15"x15" 7,2,E Binary 124
Calcomp 2500 Series 12"x12" 8,1,N Format23 16
Calcomp 2500 Series 18"x12" 8,1,N Format23 17
Calcomp 9100 Series 24"x17" 8,1,N Format5 19 (3)
Calcomp 9100 Series 24"x24" 8,1,N Format5 20 (3)
Calcomp 9100 Series 36"x14" 8,1,N Format5 18 (3)
Calcomp 9100 Series 36"x24" 8,1,N Format5 21 (3)
Calcomp 9100 Series 48"x36" 8,1,N Format5 22 (3)
Calcomp 9100 Series 60"x48" 8,1,N Format5 23 (3)
Calcomp 9500 Series 36"x24" 8,1,N Format23 24 (6)
Calcomp 9500 Series 48"x36" 8,1,N Format23 25 (6)
Calcomp 9500 Series 50"x30" 8,1,N Format23 171 (6)
Calcomp 9500 Series 60"x48" 8,1,N Format23 26 (6)
Calcomp CadPro 9"x6" 8,1,N Format23 352
Calcomp CadPro (pressure) 9"x6" 8,1,N Format20 353
Calcomp Creation Station 5"x4" 8,1,N Format23 320
Calcomp Creation Station 9"x6" 8,1,N Format23 321
Calcomp Creation Station 12"x12" 8,1,N Format23 322
Calcomp Creation Station 18"x12" 8,1,N Format23 323
Calcomp Creation Station (pressure) 5"x4" 8,1,N Format20 328
Calcomp Creation Station (pressure) 9"x6" 8,1,N Format20 329
Calcomp Creation Station (pressure) 12"x12" 8,1,N Format20 330
Calcomp Creation Station (pressure) 18"x12" 8,1,N Format20 331
Calcomp Design Station 5"x4" 8,1,N Format23 324
Calcomp Design Station 9"x6" 8,1,N Format23 325
Calcomp Design Station 12"x12" 8,1,N Format23 326
Calcomp Design Station 18"x12" 8,1,N Format23 327
Calcomp Design Station (pressure) 5"x4" 8,1,N Format20 332
Calcomp Design Station (pressure) 9"x6" 8,1,N Format20 333
Calcomp Design Station (pressure) 12"x12" 8,1,N Format20 334
Calcomp Design Station (pressure) 18"x12" 8,1,N Format20 335
Calcomp DrawingBoard 12"x12" 8,1,N Format23 13 (4)
Calcomp DrawingBoard 18"x12" 8,1,N Format23 14 (4)
Calcomp DrawingBoard 24"x18" 8,1,N Format23 15 (4)
Calcomp DrawingBoard 36"x24" 8,1,N Format23 223 (4)
Calcomp DrawingBoard 48"x36" 8,1,N Format23 224 (4)
Calcomp DrawingBoard 60"x48" 8,1,N Format23 225 (4)
Calcomp DrawingBoard II 12"x12" 8,1,N Format23 34
Calcomp DrawingBoard II 18"x12" 8,1,N Format23 35
Calcomp DrawingBoard II 24"x18" 8,1,N Format23 36
Calcomp DrawingBoard II 36"x24" 8,1,N Format23 37
Calcomp DrawingBoard II 48"x36" 8,1,N Format23 38
Calcomp DrawingBoard II 60"x44" 8,1,N Format23 39
Calcomp DrawingBoard II (pressure) 12"x12" 8,1,N Pressure 62
Calcomp DrawingBoard II (pressure) 18"x12" 8,1,N Pressure 63
Calcomp DrawingBoard II (pressure) 24"x18" 8,1,N Pressure 64
Calcomp DrawingBoard II (pressure) 36"x24" 8,1,N Pressure 65
Calcomp DrawingBoard II (pressure) 48"x36" 8,1,N Pressure 66
Calcomp DrawingBoard II (pressure) 60"x44" 8,1,N Pressure 67
Calcomp DrawingBoard III 12"x12" 8,1,N Format23 149
Calcomp DrawingBoard III 18"x12" 8,1,N Format23 150
Calcomp DrawingBoard III 24"x18" 8,1,N Format23 151
Calcomp DrawingBoard III 36"x24" 8,1,N Format23 152
Calcomp DrawingBoard III 48"x36" 8,1,N Format23 153
Calcomp DrawingBoard III 60"x44" 8,1,N Format23 154
Calcomp DrawingBoard III (pressure) 12"x12" 8,1,N Pressure 155
Calcomp DrawingBoard III (pressure) 18"x12" 8,1,N Pressure 156
Calcomp DrawingBoard III (pressure) 24"x18" 8,1,N Pressure 157
Calcomp DrawingBoard III (pressure) 36"x24" 8,1,N Pressure 158
Calcomp DrawingBoard III (pressure) 48"x36" 8,1,N Pressure 159
Calcomp DrawingBoard III (pressure) 60"x44" 8,1,N Pressure 160
Calcomp DrawingBoard IV 24"x18" 8,1,N Format23 436
Calcomp DrawingBoard IV 36"x24" 8,1,N Format23 437
Calcomp DrawingBoard IV 48"x36" 8,1,N Format23 438
Calcomp DrawingBoard IV 60"x44" 8,1,N Format23 439
Calcomp DrawingBoard IV 90"x60" 8,1,N Format23 452
Calcomp DrawingBoard IV 138"x60" 8,1,N Format23 454
Calcomp DrawingBoard IV (pressure) 24"x18" 8,1,N Pressure 440
Calcomp DrawingBoard IV (pressure) 36"x24" 8,1,N Pressure 441
Calcomp DrawingBoard IV (pressure) 48"x36" 8,1,N Pressure 442
Calcomp DrawingBoard IV (pressure) 60"x44" 8,1,N Pressure 443
Calcomp DrawingBoard IV (pressure) 90"x60" 8,1,N Pressure 453
Calcomp DrawingBoard IV (pressure) 138"x60" 8,1,N Pressure 454
Calcomp DrawingBoard V 24"x18" 8,1,N Format23 444
Calcomp DrawingBoard V 36"x24" 8,1,N Format23 445
Calcomp DrawingBoard V 48"x36" 8,1,N Format23 446
Calcomp DrawingBoard V 60"x44" 8,1,N Format23 447
Calcomp DrawingBoard V (pressure) 24"x18" 8,1,N Pressure 448
Calcomp DrawingBoard V (pressure) 36"x24" 8,1,N Pressure 449
Calcomp DrawingBoard V (pressure) 48"x36" 8,1,N Pressure 450
Calcomp DrawingBoard V (pressure) 60"x44" 8,1,N Pressure 451
Calcomp DrawingFlex 36"x30" 8,1,N Format23 255
Calcomp DrawingFlex 48"x36" 8,1,N Format23 256
Calcomp DrawingFlex (pressure) 9"x6" 8,1,N Pressure 257
Calcomp DrawingFlex (pressure) 12"x12" 8,1,N Pressure 258
Calcomp DrawingPad 7.5"x7.5" 8,1,N Format23 33 (2)
Calcomp DrawingPad (pressure) 7.5"x7.5" 8,1,N Pressure 61
Calcomp DrawingSlate 5"x4" 8,1,N Format23 234
Calcomp DrawingSlate 9"x6" 8,1,N Format23 161
Calcomp DrawingSlate 12"x12" 8,1,N Format23 162
Calcomp DrawingSlate 18"x12" 8,1,N Format23 163
Calcomp DrawingSlate (pressure) 5"x4" 8,1,N Format23 235
Calcomp DrawingSlate (pressure) 9"x6" 8,1,N Pressure 164
Calcomp DrawingSlate (pressure) 12"x12" 8,1,N Pressure 165
Calcomp DrawingSlate (pressure) 18"x12" 8,1,N Pressure 166
Calcomp DrawingSlate II 5"x4" 8,1,N Format23 236
Calcomp DrawingSlate II 9"x6" 8,1,N Format23 237
Calcomp DrawingSlate II 12"x12" 8,1,N Format23 238
Calcomp DrawingSlate II 18"x12" 8,1,N Format23 239
Calcomp DrawingSlate II (pressure) 5"x4" 8,1,N Pressure 240
Calcomp DrawingSlate II (pressure) 9"x6" 8,1,N Pressure 241
Calcomp DrawingSlate II (pressure) 12"x12" 8,1,N Pressure 242
Calcomp DrawingSlate II (pressure) 18"x12" 8,1,N Pressure 243
Calcomp EstiMat 36"x30" 8,1,N Format23 167
Calcomp Estimat 48"x36" 8,1,N Format23 168
Calcomp Estimat (pressure) 9"x6" 8,1,N Pressure 169
Calcomp Estimat (pressure) 12"x12" 8,1,N Pressure 170
GTCO AccuTab 24"x17" 8,1,N Hi-Binary 185
GTCO AccuTab 36"x24" 8,1,N Hi-Binary 186
GTCO AccuTab 48"x36" 8,1,N Hi-Binary 187
GTCO AccuTab 60"x42" 8,1,N Hi-Binary 188
GTCO AccuTab II 24"x20" 8,1,N Hi-Binary 462
GTCO AccuTab II 36"x24" 8,1,N Hi-Binary 463
GTCO AccuTab II 48"x36" 8,1,N Hi-Binary 464
GTCO AccuTab II 60"x44" 8,1,N Hi-Binary 465
GTCO DigiPad 11"x11" 8,1,N Hi-Binary 45
GTCO DigiPad 17"x11" 8,1,N Hi-Binary 46
GTCO DigiPad PC 11"x11" 8,1,N Hi-Binary 127
GTCO DigiPad PC 12"x12" 8,1,N Hi-Binary 128
GTCO DigiPad PC 17"x11" 8,1,N Hi-Binary 129
GTCO DigiPad PC 20"x20" 8,1,N Hi-Binary 130
GTCO DigiPad PC 24"x17" 8,1,N Hi-Binary 131
GTCO DigiPad PC 36"x24" 8,1,N Hi-Binary 132
GTCO DigiPad PC 48"x36" 8,1,N Hi-Binary 133
GTCO DigiPad PC 60"x42" 8,1,N Hi-Binary 134
GTCO RollUp 24"x20" 8,1,N Hi-Binary 222
GTCO RollUp 36"x30" 8,1,N Hi-Binary 51
GTCO RollUp 48"x36" 8,1,N Hi-Binary 52
GTCO RollUp II 24"x20" 8,1,N Hi-Binary 259
GTCO RollUp II 36"x30" 8,1,N Hi-Binary 260
GTCO RollUp II 48"x36" 8,1,N Hi-Binary 261
GTCO RollUp III 24"x20" 8,1,N Hi-Binary 388
GTCO RollUp III 36"x30" 8,1,N Hi-Binary 389
GTCO RollUp III 48"x36" 8,1,N Hi-Binary 390
GTCO Super L 24"x17" 8,1,N Hi-Binary 47
GTCO Super L 36"x24" 8,1,N Hi-Binary 48
GTCO Super L 48"x36" 8,1,N Hi-Binary 49
GTCO Super L 60"x42" 8,1,N Hi-Binary 50
GTCO Super L II 24"x17" 8,1,N Hi-Binary 179
GTCO Super L II 36"x24" 8,1,N Hi-Binary 180
GTCO Super L II 48"x36" 8,1,N Hi-Binary 181
GTCO Super L II 60"x42" 8,1,N Hi-Binary 182
GTCO Super L III 24"x20" 8,1,N Hi-Binary 359
GTCO Super L III 36"x24" 8,1,N Hi-Binary 360
GTCO Super L III 36"x30" 8,1,N Hi-Binary 370
GTCO Super L III 48"x36" 8,1,N Hi-Binary 361
GTCO Super L III 60"x44" 8,1,N Hi-Binary 362
GTCO Super L IV 24"x20" 8,1,N Hi-Binary 383
GTCO Super L IV 36"x24" 8,1,N Hi-Binary 384
GTCO Super L IV 36"x30" 8,1,N Hi-Binary 385
GTCO Super L IV 48"x36" 8,1,N Hi-Binary 386
GTCO Super L IV 60"x44" 8,1,N Hi-Binary 387
GTCO Ultima 12"x12" 8,1,O MM 183
GTCO Ultima 18"x12" 8,1,O MM 184
GTCO Ultima II 12"x12" 8,1,N GTCO 290
GTCO Ultima II 18"x12" 8,1,N GTCO 291
Hitachi HDG0405J 5"x4" 8,1,N HDG-III 357
Hitachi HDG0609J 9"x6" 8,1,N HDG-III 358
Hitachi HDG1111B 11"x11" 8,1,N Binary6 284 (13)
Hitachi HDG1111C 11"x11" 8,1,N Binary6 135 (8)
Hitachi HDG1212D 12"x12" 8,1,N Binary6 136 (9)
Hitachi HDG1212E 12"x12" 8,1,N Binary6 140 (16)
Hitachi HDG1217D 17"x12" 8,1,N Binary6 137 (9)
Hitachi HDG1515B 15"x15" 8,1,N Binary6 285 (13)
Hitachi HDG1515D 15"x15" 8,1,N Binary6 138 (9)
Hitachi HDG1717D 17"x17" 8,1,N Binary6 139 (9)
Hitachi HDG2222S 22"x22" 8,1,N Binary6 141 (5)
Hitachi HDG2222T 22"x22" 8,1,N Binary6 145
Hitachi HDG2436S 36"x24" 8,1,N Binary6 142 (5)
Hitachi HDG2436T 36"x24" 8,1,N Binary6 146
Hitachi HDG3648S 48"x36" 8,1,N Binary6 143 (5)
Hitachi HDG3648T 48"x36" 8,1,N Binary6 147
Hitachi HDG4460S 60"x48" 8,1,N Binary6 144 (5)
Hitachi HDG4460T 60"x48" 8,1,N Binary6 148
Houston HiPad9012 12"x12" 8,1,O MM 59
Houston HiPad9018 18"x12" 8,1,O MM 60
Houston True Grid 1005 5.1"x5.1" 7,2,E Binary 363 (28)
Houston True Grid 1011 11"x11" 7,2,E Binary 364 (28)
Houston True Grid 1017 17"x11" 7,2,E Binary 365 (28)
Houston True Grid 8011 11"x11" 8,1,N Binary 293 (29)
Houston True Grid 8017 17"x11" 8,1,N Binary 294 (29)
Houston True Grid 8024 24"x18" 8,1,N Binary 295 (29)
Houston True Grid 8036 36"x24" 8,1,N Binary 296 (29)
IQ Auto IP@d 1212 12"x12" 8,1,O MM 355
IQ Auto IP@d 1812 18"x12" 8,1,O MM 356
IQ Auto IP@d 604 6"x4" 8,1,N Pressure 354
Kontron Digicad Plus 12"x12" 8,2,N Binary 79
Kontron Digicad Plus 18"x12" 8,2,N Binary 80
Kontron Digicad Plus 24"x17" 8,2,N Binary 81
Kontron Digicad Plus (pressure) 12"x12" 8,2,N Pressure 90
Kontron Digicad Plus (pressure) 18"x12" 8,2,N Pressure 91
Kontron Digicad Plus (pressure) 24"x17" 8,2,N Pressure 92
Kontron Digikon 12"x12" 8,2,N Binary 82
Kontron Digikon 18"x12" 8,2,N Binary 83
Kontron Digikon 20"x20" 8,2,N Binary 85
Kontron Digikon 24"x17" 8,2,N Binary 84
Kontron Digikon 30"x20" 8,2,N Binary 86
Kontron Digikon 36"x24" 8,2,N Binary 87
Kontron Digikon 48"x36" 8,2,N Binary 88
Kontron Digikon 60"x42" 8,2,N Binary 89
Kurta IS/ONE 11"x8.5" 8,1,N Binary2B 27 (10)
Kurta IS/ONE 12"x12" 8,1,N Binary2B 28 (11)
Kurta IS/ONE 17"x12" 8,1,N Binary2B 29 (12)
Kurta IS/ONE (Vtel) 11"x8.5" 8,1,N Binary2B 232 (7)
Kurta IS/THREE 24"x24" 8,1,N Binary2B 93 (18)
Kurta IS/THREE 36"x30" 8,1,N Binary2B 94 (18)
Kurta IS/THREE 48"x36" 8,1,N Binary2B 95 (18)
Kurta IS/THREE 60"x42" 8,1,N Binary2B 96 (18)
Kurta Series One 11"x8.5" 8,2,N Format2 110
Kurta Series One 12"x12" 8,2,N Format2 111 (21)
Kurta Series One 17"x12" 8,2,N Format2 112
Kurta Series Three 24"x24" 8,1,N Binary2B 286
Kurta Series Three 36"x30" 8,1,N Binary2B 287
Kurta Series Three 48"x36" 8,1,N Binary2B 288
Kurta Series Three 60"x42" 8,1,N Binary2B 289
Kurta Series Two (1000 lpi) 12"x12" 8,2,N Format2 220
Kurta Series Two (1000 lpi) 17"x12" 8,2,N Format2 221
Kurta Series Two (400 lpi) 12"x12" 8,2,N Format2 218
Kurta Series Two (400 lpi) 17"x12" 8,2,N Format2 219
Kurta XGT Series 5"x4" 8,1,N XGT 428 (23)
Kurta XGT Series 8"x6" 8,1,N XGT 229 (23)
Kurta XGT Series 12"x12" 8,1,N XGT 230 (23)
Kurta XGT Series 18"x12" 8,1,N XGT 231 (23)
Kurta XLC Series 24"x18" 8,1,N IS3/2 115
Kurta XLC Series 36"x24" 8,1,N IS3/2 116
Kurta XLC Series 48"x36" 8,1,N IS3/2 117
Kurta XLC Series 60"x42" 8,1,N IS3/2 118
Kurta XLP Series 12"x12" 8,1,O MM 113 (1)
Kurta XLP Series 18"x12" 8,1,O MM 114 (1)
Kurta XMT Series 12"x12" 8,1,O MM2 227 (1)
Kurta XMT Series 18"x12" 8,1,O MM2 228 (1)
LASICO Area Digitizer 1282C 65"x18" 8,1,N B1 301 (15)
LASICO Arm Digitizer 1280-18 36"x24" 8,1,N B1 297 (14)
LASICO Arm Digitizer 1280-24 60"x36" 8,1,N B1 298 (14)
LASICO Arm Digitizer 1280-30 60"x48" 8,1,N B1 299 (14)
LASICO Arm Digitizer 1280-36 65"x60" 8,1,N B1 300 (14)
LASICO Arm Digitizer 1282-24 60"x36" 8,1,N B1 303 (15)
LASICO Arm Digitizer 1282-30 60"x48" 8,1,N B1 304 (15)
LASICO Arm Digitizer 1282-36 65"x60" 8,1,N B1 305 (15)
LASICO Arm Digitizer 1282W 36"x24" 8,1,N B1 302 (15)
LASICO Arm Digitizer P1282-24 60"x36" 8,1,N B1 306 (15)
LASICO Arm Digitizer P1282-30 60"x48" 8,1,N B1 307 (15)
LASICO Arm Digitizer P1282-36 65"x60" 8,1,N B1 308 (15)
Mitsubish Grafnet 01 11.8"x8.2" 7,1,E Binary 120 (31)
Mitsubish Grafnet 02 16.5"x13" 7,1,O Binary 126 (31)
Numonics 2200-1212 11.8"x11.8" 8,1,N Numonics 53 (1)
Numonics 2200-1212 (16 button) 11.8"x11.8" 8,1,N Numonics 268 (1)
Numonics 2200-1217 16.5"x11.8" 8,1,N Numonics 54 (1)
Numonics 2200-1217 (16 button) 16.5"x11.8" 8,1,N Numonics 269 (1)
Numonics 2200-2020 19.7"x19.7" 8,1,N Numonics 55 (1)
Numonics 2200-2020 (16 button) 19.7"x19.7" 8,1,N Numonics 270 (1)
Numonics 2200-2436 35.4"x23.6" 8,1,N Numonics 56 (1)
Numonics 2200-2436 (16 button) 35.4"x23.6" 8,1,N Numonics 271 (1)
Numonics 2200-3648 47.2"x35.4" 8,1,N Numonics 57 (1)
Numonics 2200-3648 (16 button) 47.2"x35.4" 8,1,N Numonics 272 (1)
Numonics 2200-4460 60"x44" 8,1,N Numonics 58 (1)
Numonics 2200-4460 (16 button) 60"x44" 8,1,N Numonics 273 (1)
Numonics 2210-0606 5.9"x5.9" 8,1,N Numonics 416 (1)
Numonics 2210-0606 (16 button) 5.9"x5.9" 8,1,N Numonics 417 (1)
Numonics 2210-1212 11.8"x11.8" 8,1,N Numonics 418 (1)
Numonics 2210-1212 (16 button) 11.8"x11.8" 8,1,N Numonics 419 (1)
Numonics 2210-1217 16.9"x11.8" 8,1,N Numonics 420 (1)
Numonics 2210-1217 (16 button) 16.9"x11.8" 8,1,N Numonics 421 (1)
Numonics 2210-2020 19.7"x19.7" 8,1,N Numonics 422 (1)
Numonics 2210-2020 (16 button) 19.7"x19.7" 8,1,N Numonics 423 (1)
Numonics 2210-2024 23.6"x19.7" 8,1,N Numonics 424 (1)
Numonics 2210-2024 (16 button) 23.6"x19.7" 8,1,N Numonics 425 (1)
Numonics 2210-2436 35.4"x23.6" 8,1,N Numonics 426 (1)
Numonics 2210-2436 (16 button) 35.4"x23.6" 8,1,N Numonics 427 (1)
Numonics 2210-3648 47.2"x35.4" 8,1,N Numonics 428 (1)
Numonics 2210-3648 (16 button) 47.2"x35.4" 8,1,N Numonics 430 (1)
Numonics AccuGrid 12"x12" 8,1,N Numonics 379 (1)
Numonics AccuGrid 17"x12" 8,1,N Numonics 381 (1)
Numonics AccuGrid 24"x20" 8,1,N Numonics 97 (1)
Numonics AccuGrid 36"x24" 8,1,N Numonics 98 (1)
Numonics AccuGrid 48"x36" 8,1,N Numonics 99 (1)
Numonics AccuGrid 60"x44" 8,1,N Numonics 100 (1)
Numonics AccuGrid (16 button) 12"x12" 8,1,N Numonics 380 (1)
Numonics AccuGrid (16 button) 17"x12" 8,1,N Numonics 382 (1)
Numonics AccuGrid (16 button) 24"x20" 8,1,N Numonics 279 (1)
Numonics AccuGrid (16 button) 36"x24" 8,1,N Numonics 280 (1)
Numonics AccuGrid (16 button) 48"x36" 8,1,N Numonics 281 (1)
Numonics AccuGrid (16 button) 60"x44" 8,1,N Numonics 282 (1)
Numonics AccuGrid (USB) 17"x12" USB Numonics 431
Numonics AccuGrid (USB) 24"x20" USB Numonics 432
Numonics AccuGrid (USB) 36"x24" USB Numonics 433
Numonics AccuGrid (USB) 48"x36" USB Numonics 434
Numonics AccuGrid (USB) 60"x44" USB Numonics 435
Numonics BidMat XNT 3036 36"x30" 8,1,N Numonics 314 (19)
Numonics BidMat XNT 3036 (16 button) 36"x30" 8,1,N Numonics 315 (19)
Numonics BidMat XNT 3648 48"x36" 8,1,N Numonics 316 (19)
Numonics BidMat XNT 3648 (16 button) 48"x36" 8,1,N Numonics 317 (19)
Numonics BidMate Series 2024 24"x20" 8,1,N Numonics 371
Numonics BidMate Series 2024 (16 btn) 24"x20" 8,1,N Numonics 372
Numonics BidMate Series 2436 36"x24" 8,1,N Numonics 373
Numonics BidMate Series 2436 (16 btn) 36"x24" 8,1,N Numonics 374
Numonics BidMate Series 3648 48"x36" 8,1,N Numonics 375
Numonics BidMate Series 3648 (16 btn) 48"x36" 8,1,N Numonics 376
Numonics BidMate Series 4460 60"x44" 8,1,N Numonics 377
Numonics BidMate Series 4460 (16 btn) 60"x44" 8,1,N Numonics 378
Numonics GraphicMaster 12"x12" 8,1,N Numonics 73 (1)
Numonics GraphicMaster 18"x12" 8,1,N Numonics 74 (1)
Numonics GraphicMaster (16 button) 12"x12" 8,1,N Numonics 274 (1)
Numonics GraphicMaster (16 button) 18"x12" 8,1,N Numonics 275 (1)
Numonics GridMaster 11"x8.5" 8,1,N Numonics 226 (1)
Numonics GridMaster 12"x12" 8,1,N Numonics 75 (1)
Numonics GridMaster 18"x12" 8,1,N Numonics 76 (1)
Numonics GridMaster 24"x20" 8,1,N Numonics 77 (1)
Numonics GridMaster (16 button) 11"x8.5" 8,1,N Numonics 283 (1)
Numonics GridMaster (16 button) 12"x12" 8,1,N Numonics 276 (1)
Numonics GridMaster (16 button) 18"x12" 8,1,N Numonics 277 (1)
Numonics GridMaster (16 button) 24"x20" 8,1,N Numonics 278 (1)
Numonics GridMaster (Vtel) 11"x8.5" 8,1,N Numonics 233 (7)
Science GP9 3648 48"x36" 8,1,N HiPacked 121
Science GP9XL 4060 60"x40" 8,1,N HiPacked 122
Summa BitPad One 11"x11" 7,2,E BitPad 108
Summa BitPad One 15"x15" 7,2,E BitPad 109
Summa BitPad Plus 12"x12" 7,2,E BitPad 0
Summa BitPad Two 11"x11" 7,2,E BitPad 292 (25)
Summa Microgrid 12"x12" 7,2,E UIOF 4 (17)
Summa Microgrid 17"x24" 7,2,E UIOF 9 (17)
Summa Microgrid 18"x12" 7,2,E UIOF 5 (17)
Summa Microgrid 20"x16" 7,2,E UIOF 6 (17)
Summa Microgrid 20"x20" 7,2,E UIOF 8 (17)
Summa Microgrid 24"x17" 7,2,E UIOF 7 (17)
Summa Microgrid 36"x24" 7,2,E UIOF 10 (17)
Summa Microgrid 48"x36" 7,2,E UIOF 11 (17)
Summa Microgrid 60"x42" 7,2,E UIOF 12 (17)
Summa Microgrid II 12"x12" 7,2,E UIOF 189 (17)
Summa Microgrid II 17"x24" 7,2,E UIOF 193 (17)
Summa Microgrid II 18"x12" 7,2,E UIOF 190 (17)
Summa Microgrid II 20"x20" 7,2,E UIOF 192 (17)
Summa Microgrid II 24"x17" 7,2,E UIOF 191 (17)
Summa Microgrid II 36"x24" 7,2,E UIOF 194 (17)
Summa Microgrid II 48"x36" 7,2,E UIOF 195 (17)
Summa Microgrid II 60"x42" 7,2,E UIOF 196 (17)
Summa Microgrid III 12"x12" 7,2,E UIOF 197 (17)
Summa Microgrid III 17"x24" 7,2,E UIOF 201 (17)
Summa Microgrid III 18"x12" 7,2,E UIOF 198 (17)
Summa Microgrid III 20"x20" 7,2,E UIOF 200 (17)
Summa Microgrid III 24"x17" 7,2,E UIOF 199 (17)
Summa Microgrid III 36"x24" 7,2,E UIOF 202 (17)
Summa Microgrid III 48"x36" 7,2,E UIOF 203 (17)
Summa Microgrid III 60"x44" 7,2,E UIOF 204 (17)
Summa Microgrid Ultra 17"x24" 7,2,E UIOF 244 (17)
Summa Microgrid Ultra 20"x20" 7,2,E UIOF 245 (17)
Summa Microgrid Ultra 36"x24" 7,2,E UIOF 246 (17)
Summa Microgrid Ultra 48"x36" 7,2,E UIOF 247 (17)
Summa Microgrid Ultra 60"x44" 7,2,E UIOF 248 (17)
Summa Summa Expression (pressure) 8"x6" 8,1,N SPF 262
Summa SummaDraw 12"x12" 8,1,O MM 101
Summa Summagrid III 24"x18" 7,2,E UIOF 104 (24)
Summa Summagrid III 36"x24" 7,2,E UIOF 105 (24)
Summa Summagrid III 48"x36" 7,2,E UIOF 106 (24)
Summa Summagrid III 60"x44" 7,2,E UIOF 107 (24)
Summa Summagrid IV 24"x18" 7,2,E UIOF 175 (24)
Summa Summagrid IV 36"x24" 7,2,E UIOF 176 (24)
Summa Summagrid IV 48"x36" 7,2,E UIOF 177 (24)
Summa Summagrid IV 60"x44" 7,2,E UIOF 178 (24)
Summa Summagrid V 36"x24" 8,1,N UIOF 311
Summa Summagrid V 48"x36" 8,1,N UIOF 312
Summa Summagrid V 60"x44" 8,1,N UIOF 313
Summa Summagrid VI 36"x24" 8,1,N UIOF 456
Summa Summagrid VI 48"x36" 8,1,N UIOF 457
Summa Summagrid VI 60"x44" 8,1,N UIOF 458
Summa Summagrid VII 36"x24" 8,1,N UIOF 459
Summa Summagrid VII 48"x36" 8,1,N UIOF 460
Summa Summagrid VII 60"x44" 8,1,N UIOF 461
Summa SummaPad (pressure) 5"x4" 8,1,N SPF 263
Summa SummaScribe 9"x6" 8,1,O MM 30
Summa SummaSketch 9"x6" 8,1,O MM 1
Summa SummaSketch 11.7"x11.7" 8,1,O MM 2
Summa SummaSketch 18"x12" 8,1,O MM 3
Summa SummaSketch FX 12"x12" 8,1,O MM 205
Summa SummaSketch FX 18"x12" 8,1,O MM 206
Summa SummaSketch FX (pressure) 12"x12" 8,1,O Pressure 207
Summa SummaSketch FX (pressure) 18"x12" 8,1,O Pressure 208
Summa SummaSketch II 11.7"x11.7" 8,1,O MM 31 (1)
Summa SummaSketch II 18"x12" 8,1,O MM 32 (1)
Summa SummaSketch II (16 button) 11.7"x11.7" 7,2,E UIOF 264 (1)
Summa SummaSketch II (16 button) 18"x12" 7,2,E UIOF 265 (1)
Summa SummaSketch III 12"x12" 8,1,O MM 102 (1)
Summa SummaSketch III 18"x12" 8,1,O MM 103 (1)
Summa SummaSketch III (16 button) 12"x12" 7,2,E UIOF 266 (1)
Summa SummaSketch III (16 button) 18"x12" 7,2,E UIOF 267 (1)
Wacom ArtPad (pressure) 5"x4" 8,1,N Pressure 217
Wacom ArtPad II (pressure) 5"x4" 8,1,N Pressure 254
Wacom GD Series 0405R (pressure) 5"x4" 8,1,N Pressure 336 (20)
Wacom GD Series 0608R (pressure) 8"x6" 8,1,N Pressure 337 (20)
Wacom GD Series 0912R (pressure) 12"x9" 8,1,N Pressure 338 (20)
Wacom GD Series 1212R (pressure) 12"x12" 8,1,N Pressure 339 (20)
Wacom GD Series 1218R (pressure) 18"x12" 8,1,N Pressure 340 (20)
Wacom SD Series 210 (pressure) 25"x18" 8,1,N Pressure 68
Wacom SD Series 31X 16.7"x11.8" 8,1,N Wacom 41
Wacom SD Series 31X (pressure) 16.7"x11.8" 8,1,N Pressure 69
Wacom SD Series 32X 15"x15" 8,1,N Wacom 42
Wacom SD Series 32X (pressure) 15"x15" 8,1,N Pressure 70
Wacom SD Series 42X 12"x12" 8,1,N Wacom 43
Wacom SD Series 42X (pressure) 12"x12" 8,1,N Pressure 71
Wacom SD Series 510 9.1"x5.9" 8,1,N Wacom 44
Wacom SD Series 510 (pressure) 9.1"x5.9" 8,1,N Pressure 72
Wacom Super Digitizer 210 25"x18" 8,1,N Wacom 40
Wacom UD Series 0608 (pressure) 8"x6" 8,1,N Pressure 172
Wacom UD Series 1212 (pressure) 12"x12" 8,1,N Pressure 173
Wacom UD Series 1218 (pressure) 18"x12" 8,1,N Pressure 174
Wacom UD Series 1825 (pressure) 25"x18" 8,1,N Pressure 249
Wacom UD Series II 0608 (pressure) 8"x6" 8,1,N Pressure 250
Wacom UD Series II 1212 (pressure) 12"x12" 8,1,N Pressure 251
Wacom UD Series II 1218 (pressure) 18"x12" 8,1,N Pressure 252
Wacom UD Series II 1825 (pressure) 25"x18" 8,1,N Pressure 253
[Note 1]
May be used with four or sixteen button cursors; select configuration for proper
operation.
[Note 2]
May also be configured with a Calcomp WIZ tablet.
[Note 3]
May not be used with SMART units and requires dipswitch settings for run mode,
format, parity and framing.
[Note 4]
Models produced after June, 1989 should be configured as DrawingBoard II.
[Note 5]
Requires EPROM (No.B21) upgrade. After installing EPROM, set dip switches as
follows: if two dip switch controller, DSW1 (1,3,4,7-On, all others off), DSW2
(8-On, all others off) and jumper SYNC and LS pins only on five-pin jumper bank,
and both ASYNC pins only on four-pin jumper bank; otherwise if three dip switch
controller, DSW1 (all off), DSW2 (2,3,5-On, all others off) and DSW3
(1,3,4,7-On, all others off), and jumper both ASYNC pins.
[Note 6]
Requires configuration via soft menus for communication, mode and output
formats.
[Note 7]
Requires proprietary serial interface card.
[Note 8]
Required dipswitch settings are: DSW1 (1-On, all others off); DSW2 (1-On, 2-Off,
3-On, 4-On, 5-Off, 6-On, 7-On and 8-Off); DSW3 (1-Off, 2-Off, 3-NA, 4-On, 5-On,
6-On, 7-Off and 8-Off).
[Note 9]
Required dipswitch settings are: DSW1 (1-Off, 2-Off, 3-On, 4-Off, 5-On, 6-On,
7-On and 8-Off)
[Note 10]
Required dipswitch settings are: DSW-A (1-Off, 2-Off, 3-Off, 4-On, 5-On, 6-On,
7-On, 8-Off); DSW-B (1-On, 2-On, 3-Off, 4-On, 5-Off, 6-Off, 7-On, 8-Off); DSW-C
(1-On, 2-On, 3-Off, 4-Off, 5-Off, 6-Off, 7-Off, 8-On).
[Note 11]
Required dipswitch settings are: DSW-A (1-Off, 2-Off, 3-Off, 4-On, 5-On, 6-On,
7-On, 8-Off); DSW-B (1-On, 2-On, 3-Off, 4-On, 5-Off, 6-Off, 7-On, 8-Off); DSW-C
(1-On, 2-On, 3-Off, 4-Off, 5-Off, 6-Off, 7-On, 8-Off).
[Note 12]
Required dipswitch settings are: DSW-A (1-Off, 2-Off, 3-Off, 4-On, 5-On, 6-On,
7-On, 8-Off); DSW-B (1-On, 2-On, 3-Off, 4-On, 5-Off, 6-Off, 7-On, 8-Off); DSW-C
(1-On, 2-On, 3-Off, 4-Off, 5-Off, 6-Off, 7-On, 8-On).
[Note 13]
Required dipswitch settings are: DSW1 (1-On, all others off); DSW2 (1-Off,
2-Off, 3-On, 4-On, 5-Off, 6-On, 7-Off and 8-Off); DSW3 (1-On, 2-On, 3-Off,
4-Off, 5-On, 6-On, 7-Off and 8-Off).
[Note 14]
Required dipswitch settings are: DSW1 (1-On, 2-On, 3-Off, 4-Off, 5-Off, 6-On,
7-On, 8-On); DSW2 (1-Off, 2-Off, 3-Off, 4-On, 5-Off, 6-Off, 7-On, 8-On). Type:
2nd DEC 3.
[Note 15]
Default settings: Type 2nd DRVR 3; type 2nd PARAM 00 11 ENT; type 2nd DEC 3
(keypad entry). These settings will remain active until changed.
[Note 16]
Must be configured once with original DOS driver setup program (SET12E.EXE).
Choose custom mode, 1000 lines per inch, 8,1,None and binary output format. Do
not use Hitachi Default mode.
[Note 17]
When using these units with a stylus or four-button cursor, digitizer button
four is mapped to button eleven. To correct this, use the Tablet Manager's
Button Tab to Mask button eleven to button four for both the Up and Down events
(you may wish to Lock button Masking afterwards). For the Microgrid II, the
required dipswitches are: DS1 (1-On, 2-Off, 3-Off, 4-On, 5-On, 6-Off, 7-Off, and
8-Off) and DS2 (1-Off 2-On, 3-Off, 4-On, 5-On, 6-On, 7-On and 8-On). For the
Microgrid III and IV, the required dip-switches are: DS1 (1-On, 2-Off, 3-Off,
4-On, 5-On, 6-On, 7-Off, and 8-Off), DS2 (1-On, 2-Off, 3-Off, 4-Off, 5-Off,
6-On, 7-Off and 8-Off), and DS3 (1-On, 2-On, 3-Off, 4-On, 5-Off, 6-Off, 7-Off
and 8-Off); if using a 16-button cursor, change DS3-7 to On or the unit may not
work correctly (Microgrid III and IV only).
[Note 18]
Required US dipswitch settings are: Baud (1-Up, 2-Down, 3-Down, 4-Down) and
Program (all down). For LTD models, the settings are: Baud (1-Up, 2-Down,
3-Down, 4-Up) and Program (1-Down, 2-Down, 3-Down, 4-Up, 5-Down, 6-Down, 7-Down,
8-Down).
[Note 19]
These units should be configured via soft-switch to Recall #3 (Numonics binary
#24) and may be used with four or sixteen button cursors; select configuration
for proper operation.
[Note 20]
The active area on these units includes the top menu strip which itself is not
supported.
[Note 21]
Required dipswitch settings are: (1,8-Up, all others down).
[Note 22]
Default button mappings are buttons 8 and 1 and buttons 9 and 2 reversed.
[Note 23]
To configure this device from the logo strip, digitize the logo strip areas in
the following order: Alt, F3, F2, F5, P1; Alt, F6; P1. Note that the pressure
pen cannot be used with a corded puck plugged into the device at the same time.
[Note 24]
When using these units with a stylus or four-button cursor, digitizer button
four is mapped to button eleven. To correct this, use the Tablet Manager's
Button Tab to Mask button eleven to button four for both the Up and Down events
(you may wish to Lock button Masking afterwards). For the Summagrid III and IV,
the required dip switches are: DIP-A (1-On, 2-Off, 3-Off, 4-On, 5-On, 6-On,
7-Off and 8-Off); DIP-B (1-On, 2-Off, 3-Off, 4-Off, 5-Off, 6-On, 7-Off and
8-Off); and DIP-C (1-On, 2-On, 3-Off, 4-On, 5-Off, and 6,7,8-No Change).
[Note 25]
Required internal (unplug tablet and open cover) dipswitch settings are: SW1
(1-Off, 2-On, 3-On, 4-Off, 5-Off, 6-On, 7-Off and 8-On); SW2 (1-Off, 2-On,
3-Off, 4-Off, 5-Off, 6-On, 7-Off and 8-On); and SW3 (1-On, 2-Off, 3-On, 4-Off,
5-On, 6-On, 7-On and 8-Off).
[Note 26]
The required dip switch settings for the AC31 controller are: S1 (1-Off, 2-Off,
3-Off, 4-On, 5-On, 6-?, 7-On and 8-Off (On if Liteline)); S2 (1-Off, 2-Off,
3-Off, 4-Off, 5-On, 6-Off, 7-Off and 8-Off); S3 (1-On, 2-Off, 3-On, 4-Off,
5-Off, 6-On, 7-Off and 8-Off); and S4 (1-On, 2-On, 3-Off, 4-Off, 5-Off, 6-Off,
7-Off and 8-Off).
For the AC41 controller, on the set-up menu choose the following: Format #8,
9600 Baud, Parity = None, Databits = 8, Stopbits = 1, Stream Type = Run, Rate =
50, Run Type = 2, Increment = 10, Inc. Type = Radial, English = Mils, Table Type
= ?, Control Mode = Altek, Buffer = 1, DTE & DCE Ports = ON/Data/Message, PRN =
X, Beeper = ?, CR = X, LF = X, CTS = OFF. After setting to these parameters
choose "SAVE" Storage 1 (make sure you hear the unit beep to be sure that it
saved).
The required dipswitch settings for the AC30 controller are: S1 (1-Off, 2-Off,
3-On, 4-On, 5-On, 6-On, 7-Off and 8-On); and S2 (1-Off, 2-Off, 3-Off, 4-Off,
5-On, 6-Off, 7-Off and 8-Off).
The required dipswitch settings for the AC40 controller are: Upper Left (1-On,
2-?, 3-Off, 4-Off, 5-On, 6-On, 7-Off and 8-Off); Upper Right (1-On, 2-Off,
3-Off, 4-Off, 5-Off, 6-Off, 7-On and 8-On); Lower Left (1-Off, 2-On, 3-Off,
4-Off, 5-Off, 6-On, 7-On and 8-On); and Lower Right (1-On, 2-Off, 3-Off, 4-Off,
5-Off, 6-On, 7-Off, and 8-On).
[Note 27]
Required dipswitch settings are: S1 (1-Up, 2-Up, 3-Up, 4-Up, 5-Down, 6-Up) and
S2 (1-Down, 2-Up, 3-Down, 4-Up, 5-Up, 6-Up).
[Note 28]
Required dipswitch settings are: Switch 1 (1-Up, 2-Up, 3-Up, 4-Up, 5-Down, and
6-Up) and Switch 2 (1-Down, 2-Up, 3-Down, 4-Up, 5-Up, and 6-Up).
[Note 29]
Required dipswitch settings are: Switch (1-Up, 2-Up, 3-Down, 4-Up, 5-Up, 6-Up,
7-Up, 8-Down, 9-Up, and 10-Down).
[Note 30]
When used with a five-button cursor, outputs button codes 1, 2, 4, 8 and 9. Use
the Tablet Manager's Button Masking feature to output button codes 1, 2, 3, 4
and 5, if desired.
[Note 31]
Required dipswitch settings are: 1-Off, all others On (except 8-off for Model
02).
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.