;; Toshiba Corporation. INF file.
;; Copyright (c) 1996-2000. All rights Reserved.
;; Version 2.21
;; Driver: Toshiba FIR Port Type-O & Toshiba FIR Port Type-DO for Windows2000
;; Date: 10:45 am February 22nd, 2000
;
; IRTOS4MO.INF
; for Windows 2000
;
[Version]
;;LayoutFile=layout.inf
Signature = "$Windows NT$"
Class = Infrared
ClassGUID = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F}
Provider=%TOSHIBA%
DriverVer = 02/22/2000,2.21
CatalogFile=irtos4mo.cat
[ControlFlags]
ExcludeFromSelect=PCI\VEN_1179&DEV_0701
ExcludeFromSelect=PCI\VEN_1179&DEV_0701&SUBSYS_00011179
ExcludeFromSelect=PCI\VEN_1179&DEV_0D01
ExcludeFromSelect=PCI\VEN_1179&DEV_0D01&SUBSYS_00011179
[DestinationDirs]
;
; Specify destination directories for groups of files.
; '12' indicates the Windows System directory.
;
DefaultDestDir=12
OBOE_CopyFiles=12
[Manufacturer]
;
; Specify a name and devices section for each supported manufacturer that
; makes products of this class.
;
%TOSHIBA%=TOS_Devices
[TOS_Devices]
;
; This section describes the devices of this class made by a particular
; manufacturer.
; The first descriptor, delimited by '%', is a symbolic string whose actual
; value is given in the [Strings] section below.
;
; Detection of the PCI device.
%Oboe.DevDesc%=OBOE.ndi, PCI\VEN_1179&DEV_0701
%Oboe.DevDesc%=OBOE.ndi, PCI\VEN_1179&DEV_0701&SUBSYS_00011179
%DonauOboe.DevDesc%=DonauOboe.ndi, PCI\VEN_1179&DEV_0D01
%DonauOboe.DevDesc%=DonauOboe.ndi, PCI\VEN_1179&DEV_0D01&SUBSYS_00011179
[OBOE.ndi]
;
; This section describes how to install a particular device.
; It names other sections which detail the registry changes
; that need to be made and the files that need to be copied.
;
;DeviceID=PCI\VEN_1179&DEV_0701
DelReg=OBOE_DelReg
AddReg=OBOE_AddReg,Help_Addreg
;LogConfig=TOS4MO_LogConfig
BusType=5
Characteristics=0x4 ; NCF_PHYSICAL
CopyFiles=OBOE_CopyFiles
[DonauOboe.ndi]
;
; This section describes how to install a particular device.
; It names other sections which detail the registry changes
; that need to be made and the files that need to be copied.
;
;DeviceID=PCI\VEN_1179&DEV_0D01
DelReg=OBOE_DelReg
AddReg=DonauOBOE_AddReg,Help_Addreg
BusType=5
Characteristics=0x4 ; NCF_PHYSICAL
CopyFiles=OBOE_CopyFiles
[OBOE.ndi.Services]
AddService= OBOE, 2, OBOE.AddService, common.EventLog
[DonauOBOE.ndi.Services]
AddService= OBOE, 2, DonauOBOE.AddService, common.EventLog
[OBOE_CopyFiles]
;
; This section lists the source and destination names of files that need
; to be copied to the user's drive. The destination directory is given
; in the [DestinationDirs] section above.
;
Tos4mo.sys,,,12
[SourceDisksNames]
1 = Floppy,,,""
[SourceDisksFiles]
tos4mo.sys=1
[OBOE_AddReg]
;
; This section describes additions to the Windows registry.
; See the Windows 95 Resource kit and be sure of what you're
; doing before making changes. You can use the regedit.exe tool that
; comes with Windows 95/NT to browse the registry.
;
; Interfaces
HKR, Ndi, Service, 0, "OBOE"
HKR, Ndi, RequiredAll,0, "MS_IrDA"
HKR,NDI\Interfaces,DefUpper,0,%UpperInterface%
HKR,NDI\Interfaces,UpperRange,0,%UpperInterface%
HKR,Ndi\Interfaces, DefLower, 0,%LowerInterface%
HKR,Ndi\Interfaces, LowerRange, 0,%LowerInterface%
;
; These entries allow the user to select the value of Tx_WINDOW_SIZE,
; Rx_WINDOW_SIZE and TURNAROUNDTIME that the OBOE driver uses from
; network properties dialog box AFTER INSTALLATION (under the 'Advanced' options).
; The user's selection is recorded in the registry and then read out
; by the irmini.sys driver at boot time.
;
HKR,NDI\params\Tx_WINDOW_SIZE,ParamDesc,,"Tx Window Size"
HKR,NDI\params\Tx_WINDOW_SIZE,flag,1,20,00,00,00
HKR,NDI\params\Tx_WINDOW_SIZE,default,,"7"
HKR,,Tx_WINDOW_SIZE,,"7"
HKR,NDI\params\Tx_WINDOW_SIZE,type,,enum
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"1",,"1"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"2",,"2"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"3",,"3"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"4",,"4"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"5",,"5"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"6",,"6"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"7",,"7"
HKR,NDI\params\Rx_WINDOW_SIZE,ParamDesc,,"Rx Window Size"
HKR,NDI\params\Rx_WINDOW_SIZE,flag,1,20,00,00,00
HKR,NDI\params\Rx_WINDOW_SIZE,default,,7
HKR,,Rx_WINDOW_SIZE,,"7"
HKR,NDI\params\Rx_WINDOW_SIZE,type,,enum
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"1",,"1"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"2",,"2"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"3",,"3"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"4",,"4"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"5",,"5"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"6",,"6"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"7",,"7"
HKR,NDI\params\TURNAROUNDTIME,ParamDesc,,"TurnAroundTime(usec)"
HKR,NDI\params\TURNAROUNDTIME,flag,1,20,00,00,00
HKR,NDI\params\TURNAROUNDTIME,default,,1000
HKR,,TURNAROUNDTIME,,"1000"
HKR,NDI\params\TURNAROUNDTIME,type,,enum
HKR,NDI\params\TURNAROUNDTIME\enum,"0",,"0"
HKR,NDI\params\TURNAROUNDTIME\enum,"10",,"10"
HKR,NDI\params\TURNAROUNDTIME\enum,"50",,"50"
HKR,NDI\params\TURNAROUNDTIME\enum,"100",,"100"
HKR,NDI\params\TURNAROUNDTIME\enum,"500",,"500"
HKR,NDI\params\TURNAROUNDTIME\enum,"1000",,"1000"
HKR,NDI\params\TURNAROUNDTIME\enum,"5000",,"5000"
HKR,NDI\params\TURNAROUNDTIME\enum,"10000",,"10000"
;HKR,Ndi\params\FRONT_OR_BACK,ParamDesc,,"Front or BACK?"
;HKR,Ndi\params\FRONT_OR_BACK,flag,1,20,00,00,00
;HKR,Ndi\params\FRONT_OR_BACK,default,,Back port
;HKR,Ndi\params\FRONT_OR_BACK,type,,enum
;HKR,Ndi\params\FRONT_OR_BACK\enum,"0",,"Back port"
;HKR,Ndi\params\FRONT_OR_BACK\enum,"1",,"Front port"
HKR,,FRONT_OR_BACK,,"Back port"
;HKR,Ndi\params\PULSE_WIDTH,ParamDesc,,"Pulse Width"
;HKR,Ndi\params\PULSE_WIDTH,flag,1,20,00,00,00
;HKR,Ndi\params\PULSE_WIDTH,default,,163
;HKR,Ndi\params\PULSE_WIDTH,type,,enum
;HKR,Ndi\params\PULSE_WIDTH\enum,"163",,"163"
;HKR,Ndi\params\PULSE_WIDTH\enum,"3/16",,"3/16"
HKR,,PULSE_WIDTH,,"163"
;;HKR,Ndi\params\MLTPT,ParamDesc,,"Use both ports?"
;;HKR,Ndi\params\MLTPT,flag,1,20,00,00,00
;;HKR,Ndi\params\MLTPT,default,,0
;;HKR,Ndi\params\MLTPT,type,,enum
;;HKR,Ndi\params\MLTPT\enum,"0",,"Yes"
;;HKR,Ndi\params\MLTPT\enum,"1",,"No"
[DonauOBOE_AddReg]
;
; This section describes additions to the Windows registry.
; See the Windows 95 Resource kit and be sure of what you're
; doing before making changes. You can use the regedit.exe tool that
; comes with Windows 95/NT to browse the registry.
;
; Interfaces
HKR, Ndi, Service, 0, "OBOE"
HKR, Ndi, RequiredAll,0, "MS_IrDA"
HKR,NDI\Interfaces,DefUpper,0,%UpperInterface%
HKR,NDI\Interfaces,UpperRange,0,%UpperInterface%
HKR,Ndi\Interfaces, DefLower, 0,%LowerInterface%
HKR,Ndi\Interfaces, LowerRange, 0,%LowerInterface%
;
; These entries allow the user to select the value of Tx_WINDOW_SIZE,
; Rx_WINDOW_SIZE and TURNAROUNDTIME that the OBOE driver uses from
; network properties dialog box AFTER INSTALLATION (under the 'Advanced' options).
; The user's selection is recorded in the registry and then read out
; by the irmini.sys driver at boot time.
;
HKR,NDI\params\Tx_WINDOW_SIZE,ParamDesc,,"Tx Window Size"
HKR,NDI\params\Tx_WINDOW_SIZE,flag,1,20,00,00,00
HKR,NDI\params\Tx_WINDOW_SIZE,default,,"7"
HKR,,Tx_WINDOW_SIZE,,"7"
HKR,NDI\params\Tx_WINDOW_SIZE,type,,enum
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"1",,"1"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"2",,"2"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"3",,"3"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"4",,"4"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"5",,"5"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"6",,"6"
HKR,NDI\params\Tx_WINDOW_SIZE\enum,"7",,"7"
HKR,NDI\params\Rx_WINDOW_SIZE,ParamDesc,,"Rx Window Size"
HKR,NDI\params\Rx_WINDOW_SIZE,flag,1,20,00,00,00
HKR,NDI\params\Rx_WINDOW_SIZE,default,,7
HKR,,Rx_WINDOW_SIZE,,"7"
HKR,NDI\params\Rx_WINDOW_SIZE,type,,enum
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"1",,"1"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"2",,"2"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"3",,"3"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"4",,"4"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"5",,"5"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"6",,"6"
HKR,NDI\params\Rx_WINDOW_SIZE\enum,"7",,"7"
HKR,NDI\params\TURNAROUNDTIME,ParamDesc,,"TurnAroundTime(usec)"
HKR,NDI\params\TURNAROUNDTIME,flag,1,20,00,00,00
HKR,NDI\params\TURNAROUNDTIME,default,,1000
HKR,,TURNAROUNDTIME,,"1000"
HKR,NDI\params\TURNAROUNDTIME,type,,enum
HKR,NDI\params\TURNAROUNDTIME\enum,"0",,"0"
HKR,NDI\params\TURNAROUNDTIME\enum,"10",,"10"
HKR,NDI\params\TURNAROUNDTIME\enum,"50",,"50"
HKR,NDI\params\TURNAROUNDTIME\enum,"100",,"100"
HKR,NDI\params\TURNAROUNDTIME\enum,"500",,"500"
HKR,NDI\params\TURNAROUNDTIME\enum,"1000",,"1000"
HKR,NDI\params\TURNAROUNDTIME\enum,"5000",,"5000"
HKR,NDI\params\TURNAROUNDTIME\enum,"10000",,"10000"
;HKR,Ndi\params\FRONT_OR_BACK,ParamDesc,,"Front or BACK?"
;HKR,Ndi\params\FRONT_OR_BACK,flag,1,20,00,00,00
;HKR,Ndi\params\FRONT_OR_BACK,default,,Back port
;HKR,Ndi\params\FRONT_OR_BACK,type,,enum
;HKR,Ndi\params\FRONT_OR_BACK\enum,"0",,"Back port"
;HKR,Ndi\params\FRONT_OR_BACK\enum,"1",,"Front port"
HKR,,FRONT_OR_BACK,,"Back port"
;HKR,Ndi\params\PULSE_WIDTH,ParamDesc,,"Pulse Width"
;HKR,Ndi\params\PULSE_WIDTH,flag,1,20,00,00,00
;HKR,Ndi\params\PULSE_WIDTH,default,,163
;HKR,Ndi\params\PULSE_WIDTH,type,,enum
;HKR,Ndi\params\PULSE_WIDTH\enum,"163",,"163"
;HKR,Ndi\params\PULSE_WIDTH\enum,"3/16",,"3/16"
HKR,,PULSE_WIDTH,,"163"
[OBOE_DelReg]
HKR,,EnumPropPages32
[Help_Addreg]
HKR,NDI,HelpText,0,%OBOE_HELP%
[OBOE.AddService]
DisplayName = %Oboe.DevDesc%
ServiceType = 1 ; %SERVICE_KERNEL_DRIVER%
StartType = 3 ; %SERVICE_DEMAND_START%
ErrorControl = 1 ; %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\tos4mo.sys ;12=drivers directory
LoadOrderGroup = NDIS
[DonauOBOE.AddService]
DisplayName = %DonauOboe.DevDesc%
ServiceType = 1 ; %SERVICE_KERNEL_DRIVER%
StartType = 3 ; %SERVICE_DEMAND_START%
ErrorControl = 1 ; %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\tos4mo.sys ;12=drivers directory
LoadOrderGroup = NDIS
[common.EventLog]
AddReg = common.AddEventLog.reg
[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
[Strings]
;
; This section defines symbolic string constants for use in the rest
; of the .inf script. You should create and use symbols for all
; translatable strings in order to make localization easier.
; Also, spaces within strings elsewhere in the script confuse infedit.exe;
; so use symbolic constants for any multi-word strings.
;
TOSHIBA="TOSHIBA"
UpperInterface="ndisirda"
LowerInterface="nolower"
Oboe.DevDesc="Toshiba FIR Port Type-O"
DonauOboe.DevDesc="Toshiba FIR Port Type-DO"
OBOE_HELP="The IrDA1.1 infrared port. It can be used to establish wireless and network links to other computers at 4Mbps."
;V_CLASSNAME="Infrared adapters"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.