;******************************************************************** ; Megahertz PCMCIA NetCard Install ; Author: Darrell Goff ; ; Copyright (c) 1995-1997, Megahertz Corporation ;******************************************************************** [Version] LayoutFile=layout.inf Signature="$CHICAGO$" Provider=%MS% Class=Net [Manufacturer] %MHZ% = MHZ [MHZ] %MHZ8%=MHZ8.ndi,MF\MHZ_DEV8 ;******************************************************************** ; ;******************************************************************** [MHZ8.ndi] AddReg=ADDREG.ndi.reg,MHZ8.ndi.reg,ADDREG_MHZ.ndi.reg [ADDREG.ndi.reg] ; key,subkey,valuname,type,value HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,mhzc9x.sys HKR,,EnumPropPages,,"netdi.dll,EnumPropPages" ; NDIS Info HKR,NDIS,LogDriverName,,"mhzc9x" HKR,NDIS,MajorNdisVersion,HEX,04 HKR,NDIS,MinorNdisVersion,HEX,00 ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"ndis3" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"ndis3" HKR,Ndi\Interfaces,LowerRange,,"ethernet" HKR,Ndi,CardType,,"PCMCIA" ; Parameters HKR,,IOBase,1,02,00,00,00 HKR,,Interrupt,1,04,00,00,00 HKR,,MemoryBaseAddress,1,01,00,00,00 ; NetworkAddress HKR,NDI\params\NetworkAddress,ParamDesc,,"Network Address" HKR,NDI\params\NetworkAddress,type,,edit HKR,NDI\params\NetworkAddress,LimitText,,18 HKR,NDI\params\NetworkAddress,UpperCase,,1 HKR,Ndi\params\NetworkAddress,default,,"" HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00 HKR,Ndi\params\NetworkAddress,optional,,1 ; Squelch Bit HKR,Ndi\params\SquelchBit,ParamDesc,,"Squelch Bit" HKR,Ndi\params\SquelchBit,default,,"1" HKR,Ndi\params\SquelchBit,type,,enum HKR,Ndi\params\SquelchBit\enum,"0",,"Squelch Bit OFF" HKR,Ndi\params\SquelchBit\enum,"1",,"Squelch Bit ON" HKR,Ndi\params\SquelchBit,flag,1,20,00,00,00 ; CardIsCombo setting for multifunction card LANONLY = 0, COMBO = 1 ;HKR,Ndi\params\CardIsCombo,ParamDesc,,"MultiFunction Card" HKR,Ndi\params\CardIsCombo,default,,1 ;HKR,Ndi\params\CardIsCombo,type,,enum ;HKR,Ndi\params\CardIsCombo\enum,"10BaseT",,"Twisted Pair (10BASE-T)" ;HKR,Ndi\params\CardIsCombo\enum,"10Base2",,"Thin Coax (10BASE2)" HKR,Ndi\params\CardIsCombo,flag,1,20,00,00,00 ; AdapterType HKR,Ndi\params\MediaType,ParamDesc,,"Connector Type" HKR,Ndi\params\MediaType,default,,0 HKR,Ndi\params\MediaType,type,,enum HKR,Ndi\params\MediaType\enum,0,,"Twisted Pair (10BASE-T)" HKR,Ndi\params\MediaType\enum,1,,"Thin Coax (10BASE2)" HKR,Ndi\params\MediaType,flag,1,20,00,00,00 [ADDREG_1.ndi.reg] ; key,subkey,valuname,type,value HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,mhzc9x.sys HKR,,EnumPropPages,,"netdi.dll,EnumPropPages" ; NDIS Info HKR,NDIS,LogDriverName,,"mhzc9x" HKR,NDIS,MajorNdisVersion,HEX,04 HKR,NDIS,MinorNdisVersion,HEX,00 ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"ndis3" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"ndis3" HKR,Ndi\Interfaces,LowerRange,,"ethernet" HKR,Ndi,CardType,,"PCMCIA" ; Parameters HKR,,IOBase,1,02,00,00,00 HKR,,Interrupt,1,04,00,00,00 HKR,,MemoryBaseAddress,1,01,00,00,00 ; NetworkAddress HKR,NDI\params\NetworkAddress,ParamDesc,,"Network Address" HKR,NDI\params\NetworkAddress,type,,edit HKR,NDI\params\NetworkAddress,LimitText,,18 HKR,NDI\params\NetworkAddress,UpperCase,,1 HKR,Ndi\params\NetworkAddress,default,,"" HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00 HKR,Ndi\params\NetworkAddress,optional,,1 [MHZ8.ndi.reg] HKR,Ndi,DeviceID,,"MF\MHZ_DEV8" HKR,Ndi\Install,ndis3,,"mhzc9x.ndis3" [ADDREG_MHZ.ndi.reg] HKR,,AdapterType,,3 HKR,,MemoryBaseAddress,1,01,00,00,00 ;**************************************************************************** ; Add these keys to the registry for MHZ adapters ;**************************************************************************** [override2.ndi.reg] ; OVERRIDE FOR 16K RAM WINDOW HKR,Override,0000,1,\ ; 00,04,00,00, \ ; CONFIGMG_VERSION 00,00,00,00, \ ; PRIORITY ; ; I/O Resource Descriptor ; 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; ;IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; E0,FF, \ ; IOR_Align; // Mask for base alignment 20,00, \ ; IOR_nPorts; // Number of ports 00,01, \ ; IOR_Min; // Min port address FF,03, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 64,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number FF,FF, \ ; IRQD_Req_Mask; // Mask of possible IRQs 00,00, \ ; IRQD_Reserved; 20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts ; ; Memory Resource Descriptor 0 ; 34,00,00,00, \ ; Total length of Memory Resource Descriptor 01,00,00,00, \ ; ResType_Mem = 0x00000001 01,00, \ ; MD_Count; 14,00, \ ; MD_Type; // MType_Range = 0x0014 00,00,00,00, \ ; MD_Alloc_Base; 00,00,00,00, \ ; MD_Alloc_End; 00,00, \ ; MD_Flags; 00,00, \ ; MD_Reserved; 00,F0,FF,FF, \ ; MR_Align; // Mask for base alignment 00,10,00,00, \ ; MR_nBytes; // Count of bytes (4K) 00,00,00,00, \ ; MR_Min; // Min Address FF,FF,FF,FF, \ ; MR_Max; // Max Address 00,00, \ ; MR_Flags; // Flags 00,00, \ ; MR_Reserved; 02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or ; 0x08 = 16-bit common mem 00,00,00,00, \ ; Memory card address ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ; Socket; 02,00, \ ; Attributes; 32, \ ; Vcc; 32, \ ; Vpp1; 32, \ ; Vpp2; 02, \ ; IntType; 00,03,00,00, \ ; ConfigBase; 00, \ ; Status; 00, \ ; Pin; 00, \ ; Copy; 01, \ ; ConfigIndex; 01, \ ; Present; ; 00,00,00,00 ; TERMINATOR [override3.ndi.reg] ; OVERRIDE FOR 16K RAM WINDOW HKR,Override,0000,1,\ ; 00,04,00,00, \ ; CONFIGMG_VERSION 00,00,00,00, \ ; PRIORITY ; ; I/O Resource Descriptor ; 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; ;IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; E0,FF, \ ; IOR_Align; // Mask for base alignment 10,00, \ ; IOR_nPorts; // Number of ports 00,01, \ ; IOR_Min; // Min port address 7F,03, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 45,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number FF,FF, \ ; IRQD_Req_Mask; // Mask of possible IRQs 00,00, \ ; IRQD_Reserved; 70,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts ; ; Memory Resource Descriptor 0 ; 34,00,00,00, \ ; Total length of Memory Resource Descriptor 01,00,00,00, \ ; ResType_Mem = 0x00000001 01,00, \ ; MD_Count; 14,00, \ ; MD_Type; // MType_Range = 0x0014 00,00,00,00, \ ; MD_Alloc_Base; 00,00,00,00, \ ; MD_Alloc_End; 00,00, \ ; MD_Flags; 00,00, \ ; MD_Reserved; 00,F0,FF,FF, \ ; MR_Align; // Mask for base alignment 00,10,00,00, \ ; MR_nBytes; // Count of bytes (4K) 00,00,00,00, \ ; MR_Min; // Min Address FF,FF,FF,FF, \ ; MR_Max; // Max Address 00,00, \ ; MR_Flags; // Flags 00,00, \ ; MR_Reserved; 02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or ; 0x08 = 16-bit common mem 00,00,00,00, \ ; Memory card address ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ; Socket; 02,00, \ ; Attributes; 32, \ ; Vcc; 32, \ ; Vpp1; 32, \ ; Vpp2; 02, \ ; IntType; 00,03,00,00, \ ; ConfigBase; 00, \ ; Status; 00, \ ; Pin; 00, \ ; Copy; 01, \ ; ConfigIndex; 01, \ ; Present; ; 00,00,00,00 ; TERMINATOR ;******************************************************************** ; Stuff for copying files ;******************************************************************** [mhz.ndis3] CopyFiles=mhz.ndis3.CopyFiles [mhz.ndis3.CopyFiles] mhzc9x.sys [DestinationDirs] DefaultDestDir = 11 mhz.ndis3.CopyFiles = 11 [Strings] MS="Microsoft" MHZ="Megahertz" MHZ8 = "Megahertz CCXJEM3336 Multi-function (Network Interface)"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.