1. 3c509b.zip Driver
2. LANTASTK.TXT File Contents

LANTASTK.TXT Driver File Contents (3c509b.zip)

                        3Com (R) Corporation
                     EtherDisk (R) Diskette for
                    The EtherLink III NIC Family
               Artisoft LANtastic Installation Notes


Artisoft LANtastic Version 6.0
------------------------------
This procedure describes how to install Artisoft LANtastic 6.0 using the
3Com NDIS 2.01 driver ELNK3.DOS.  To install LANtastic from the DOS prompt
or from Windows, follow these steps:


Installing from the DOS Prompt
------------------------------
1.  Insert Artisoft's LANtastic Install Disk 1 of 4 in the floppy drive.

2.  Type:

    INSTALL

    This launches Windows and starts the installation of LANtastic.

3.  Go to step 4 under the "Installing from Windows" procedure and
    continue with the remaining steps.


Installing from Windows
-----------------------
1.  Launch Windows, if it is not already opened.

2.  Select Run from the Windows File menu.

3.  Type:

    A:\INSTALL

    If you are using a different drive, use the letter for that drive.

4.  Follow the instructions and answer the questions that appear.

5.  Select NDIS Support for Network Adapters in the Select Network Adapter
    window.

6.  When prompted, remove the LANtastic diskette, insert the EtherDisk #2
    diskette provided with the 3Com EtherLink III NIC, and press [Enter].

    The NDIS driver is copied to your hard drive.

7.  When prompted, reinsert the LANtastic Install Disk 1 in the drive.

8.  Answer the questions concerning your PC name and drives based on your
    configuration.


Changes and Additions to PC Startup Files
-----------------------------------------
The following lines are added or changed in these PC startup files:


AUTOEXEC.BAT File
-----------------
call C:\LANTASTI\STARTNET.BAT


CONFIG.SYS File
---------------
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
DEVICE=C:\LANTASTI\ELNK3.DOS


PROTOCOL.INI File
-----------------
[PROTMAN]
  DRIVERNAME = PROTMAN$
  DYNAMIC = YES

[ELNK3_NIF]
  DRIVERNAME = ELNK3$


STARTNET.BAT File
-----------------
C:
cd C:\LANTASTI

SET LAN_CFG=C:\LANTASTI

rem If LANtastic is disabled, skip everything.
IF EXIST DISABLED GOTO :STARTNET_DONE

@echo ===== Begin LANtastic configuration =====

PATH C:\LANTASTI;C:\LANTASTI\NW;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
SET NWDBPATH=C:\LANTASTI\NW

LOADHIGH AI-NDIS BIND_TO=ELNK3_NIF

AILANBIO @STARTNET.CFG

REDIR ACME1111CT @STARTNET.CF ======> Just an example !!!

IF EXIST NOSHARE GOTO :NOSHARE
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\ACME1111CT ======> Just an example !!!
GOTO :CONTINUE

:NOSHARE
@echo LANtastic server was installed but turned off.

:CONTINUE

rem If CONNECT.BAT exists, run it to set up connections.
IF EXIST CONNECT.BAT GOTO :CONNECT

rem Otherwise set up connections specified
rem  during install.

NET LOGIN/wait \\ABC        ======> Just an example !!!
NET USE D: \\ABC\C-DRIVE    ======> Just an example !!!
NET LPT TIMEOUT 10
GOTO :CONNECT_DONE

:CONNECT
@echo Setting up LANtastic connections from CONNECT.BAT
rem Build CONNECT.BAT like this:
rem        "NET SHOW/BATCH > C:\LANTASTI\CONNECT.BAT"
rem   (or run the batch file SETNET.BAT)
call CONNECT.BAT

:CONNECT_DONE
NET POSTBOX

@echo ===== End LANtastic configuration =====

:STARTNET_DONE
cd \


SYSTEM.INI File (Windows)
-------------------------
[boot]
shell=progman.exe
network.drv=C:\LANTASTI\LANTNET.DRV

[boot.description]
network.drv=LANtastic for Windows Version 6.00

[386Enh]
network=*vnetbios,C:\LANTASTI\LANTASTI.386

[network drivers]
netcard=ELNK3.DOS

[LANtastic]
Comment=Add 1 Network_IRQ per NIC, specify correct Irq values.
Network_IRQ=15


WIN.INI  File (Windows)
-----------------------
[windows]
spooler=no
load=NWPOPUP.EXE C:\LANTASTI\WNET.EXE
run=C:\LANTASTI\MKWGROUP.EXE



Artisoft LANtastic Version 7.0
------------------------------

This procedure describes how to install Artisoft LANtastic 7.0 under Microsoft
Windows using the 3Com EtherLink III NDIS 2 driver. To install LANtastic 7.0
follow the steps below:


LANtastic 7.0, Windows 3.1x Installation Procedure
--------------------------------------------------

1. Insert the LANtastic 7.0 CD-ROM or diskettes into the appropriate drive.
In Windows 3.1x select File - Run... from the Program Manager menu and type
A:\SETUP. In Windows '95 click Start on the Taskbar, select Run... and type
A:\SETUP. (A denotes the letter of the drive you are installing LANtastic
from).

2. Follow the instructions on the screen and complete all registration
information, serial number and verification key, and other information that
will identify your computer on your network when prompted.

3. LANtastic 7.0 gives you the option to configure your PC as a Server as
well as a Client to the rest of your network. This option is selected as
follows during the installation.

Under the window entitled LANtastic 7.0 Setup you will find the option
"Share this computer's drives & printers (run server)". Check the box next
to this option if you wish to configure your PC as a server as well as a
client. If you chose not to select this option your PC will be configured as
a client only.

Note that during the installation, LANtastic 7.0 gives you other options as
well, such as, "Allow connections to Windows for Workgroups or Windows '95
networks", "Allow connections to existing Novell Servers", "Enable HP
JetDirect printer support", Modem sharing options, TCP/IP support, and
Internet Gateway Service on your PC. Check the box next to each option that
you wish to install during LANtastic 7.0 Setup.

4. After you have selected the appropriate options that you want LANtastic
to install you will need to setup and configure your 3Com EtherLink III NIC.
LANtastic 7.0 Setup will display the following options for your Ethernet NIC.

        Artisoft NodeRunner Pro Adapter
        Artisoft NodeRunner Adapter
        Common Adapters
        NDIS Support for Artisoft Adapters
        Use NDIS Driver for Non-Artisoft Adapter

Note that the setup option "Allow connections to existing Novell servers"
from step 3 works only with Artisoft NodeRunner Adapters. If you have
selected this option you will not be able to choose any other type of
adapter to install. You must go back and un-select this option in order to
install the driver for the 3Com EtherLink III NIC.

5. Select the last option for the type of NIC driver that you want to
install i.e. "Use NDIS Driver for Non-Artisoft Adapter". Type the letter of
your floppy drive and insert the 3Com EtherLink III driver diskette. Then
click on Search. The program will display the name of your 3Com EtherLink
III NIC at the top of the LANtastic 7.0 Setup window. Click OK to confirm
this selection and then click INSTALL to copy the LANtastic files from the
CD-ROM or diskettes to your hard disk.

6. At the end of the installation select Restart the computer. This will
close Windows and reboot your PC. LANtastic should be installed and
configured when you start Windows. For additional information on setting up
shares and using LANtastic refer to your Artisoft LANtastic User's Manual.


LANtastic 7.0, Windows '95 Installation Procedure
-------------------------------------------------

Under Windows '95 the installation of LANtastic 7.0 is slightly different
than that for Windows 3.1x. The reason is that Windows '95 installs and
configures your 3Com EtherLink III NIC automatically. Thus, LANtastic
retrieves the NIC driver information from Windows without the need for user
intervention.

To install and configure LANtastic 7.0 under Windows '95, follow steps 1, 2,
 3, and 6 from the list above.  Your NIC configuration will be incorporated
into LANtastic automatically from your Windows '95 setup.


              (%VER LANTASTK.TXT - Artisoft LANtastic v6.0a)