[IntstallOptions] Install_PACE = "YES" Install_3NIC_Diag = "YES" Install_Shortcuts = "YES" Install_Installer = "YES" [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA MCA "Jazz-Internal Bus" [Options] ELNK3ISA509 ELNK3EISA ELNK3MCA [DriverFilenameConstantsNDIS3] NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\ELNK3ND3.sys" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ELNK3ND3.sys" ProductSoftwareUpgradePath = "\SystemRoot\System32\drivers\ELNK3ND3.sys" [DriverFilenameConstantsNDIS4] NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\ELNK3ND4.sys" ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\ELNK3ND4.sys" ProductSoftwareUpgradePath = "\SystemRoot\\System32\drivers\ELNK3ND4.sys" [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" MS_Manufacturer = "Microsoft" Manufacturer = "3Com" ProductMajorVersion = "3" ProductMinorVersion = "51" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "Elnk3" NetRuleSoftwareType = "elnk3Sys ndisDriver elnk3Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """Elnk3Sys"" yes no container" NetRuleSoftwareClass = {"elnk3Driver basic"} NetRuleSoftwareBindable = {"elnk3Driver elnk3Adapter non exclusive 100"} ProductHardwareName = "elnk3" NetRuleHardwareType = "elnk3 elnk3Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"elnk3Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" MS_ProductKeyName = $(!NTN_SoftwareBase)"\"$(MS_Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ServiceKeyName = $(!NTN_ServiceBase) GROUP_NAME = "3Com EtherLink III 3C5x9 Adapters" ELNK3EISA_COMPRESSID = 5270864 ELNK3EISA_1BYTE = 2421189968 ELNK3EISA_MASK = 4043309055 ELNK3MCA_1BYTE = { 124, 125, 219, 246, 247 } ELNK3MCA_2BYTE = { 98, 98, 97, 98, 98 } NETCARD_ID = { 25212, 25213, 25051, 25334, 25335 } TrayIconExe = TCASUTI InstallerExe = TCAUDIAG [GeneralConstants] !G:DebugOutputControl = 1 from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers INF_PROCESSER = "I386" DIAGCARDTYPE = "TCAUM509" NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" NT400VersionConstant = "(4.0)" IDPORTVALUE = "272" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 3, 1) Return $(Status) $(Identifier) $(Media) [DiagRegistry] OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY ifstr $(COMKEY) == "" CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY endif OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) TCAUDIAGKEY ifstr $(TCAUDIAGKEY) == "" CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUDIAGKEY endif OpenRegKey $(TCAUDIAGKEY) "" "TCAUM509" $(!REG_KEY_WRITE) TCAUM509KEY ifstr $(TCAUM509KEY) == "" CreateRegKey $(TCAUDIAGKEY) {"TCAUM509", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUM509KEY endif SetRegValue $(TCAUM509KEY) {"DriverNames", 0, $(!REG_VT_SZ), "ELNK3ODI.COM;ELNK3ND2.DOS;SYSTEM\ELNK3ND3.SYS;SYSTEM\ELNK3ND4.SYS"} OpenRegKey $(TCAUM509KEY) "" "Extentions" $(!REG_KEY_WRITE) ExtentionsKEY ifstr $(ExtentionsKEY) == "" CreateRegKey $(TCAUM509KEY) {"Extentions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtentionsKEY endif OpenRegKey $(ExtentionsKEY) "" "Pace" $(!REG_KEY_WRITE) PaceKEY ifstr $(PaceKEY) == "" CreateRegKey $(ExtentionsKEY) {"Pace", 0, GenericClass} "" $(!REG_KEY_WRITE) "" PaceKEY endif SetRegValue $(PaceKEY) {"CPLName", 0, $(!REG_VT_SZ), "PACECFG.CPL"} CloseRegKey $(SOFTKEY) CloseRegKey $(COMKEY) CloseRegKey $(TCAUDIAGKEY) CloseRegKey $(TCAUM509KEY) CloseRegKey $(ExtentionsKEY) CloseRegKey $(PaceKEY) return [PaceRegistry] read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE) read-syms FileDependentDlg$(!STF_LANGUAGE) Debug-Output "Start paceentries." OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {PACENAME,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTPACEKEY OpenRegKey $(SOFTPACEKEY) "" "3Com" $(!REG_KEY_WRITE) COMPACEKEY ifstr $(COMPACEKEY) == "" CreateRegKey $(SOFTPACEKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMPACEKEY endif OpenRegKey $(COMPACEKEY) "" "PACECards" $(!REG_KEY_WRITE) CARDPACEKEY ifstr $(CARDPACEKEY) == "" CreateRegKey $(COMPACEKEY) {"PACECards", 0, GenericClass} "" $(!REG_KEY_WRITE) "" CARDPACEKEY endif OpenRegKey $(CARDPACEKEY) "" "ELNK3" $(!REG_KEY_WRITE) ELNK3PACEKEY ifstr $(ELNK3PACEKEY) == "" CreateRegKey $(CARDPACEKEY) {"ELNK3", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ELNK3PACEKEY endif SetRegValue $(ELNK3PACEKEY) {"Description", 0, $(!REG_VT_SZ), $(GROUP_NAME)} OpenRegKey $(CARDPACEKEY) "" "Applications" $(!REG_KEY_WRITE) APPPACEKEY ifstr $(APPPACEKEY) == "" CreateRegKey $(CARDPACEKEY) {"Applications", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPPACEKEY endif OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"87C7"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"87C8"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"0453"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"0455"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "InSoft Communique!" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"InSoft Communique!", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1025, 1500"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1050, 1525"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"4050"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4082"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"06a4"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"06d6"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Precept FlashWare" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Precept FlashWare", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Progressive Networks RealAudio" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Progressive Networks RealAudio", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"6970"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7170"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Starlight Networks StarCast" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Starlight Networks StarCast", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1911"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1911"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "VCON Cruiser 100" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"VCON Cruiser 100", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "VXtreme Web Theater" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"VXtreme Web Theater", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"7000"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7020"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) OpenRegKey $(APPPACEKEY) "" "Xing Technology Streamworks" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Xing Technology Streamworks", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1558"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1558"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif OpenRegKey $(APPPACEKEY) "" "Vosaic Software Server" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Vosaic Software Server", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"TCP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"04D3"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"04D3"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif OpenRegKey $(APPPACEKEY) "" "Vosaic Software Client" $(!REG_KEY_WRITE) APPSPECPACEKEY ifstr $(APPSPECPACEKEY) == "" CreateRegKey $(APPPACEKEY) {"Vosaic Software Client", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY endif set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+ {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, + {RangeStart,$(NoTitle),$(!REG_VT_SZ),"F169"}, + {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"F17D"}} Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(APPSPECPACEKEY) CloseRegKey $(ELNK3PACEKEY) CloseRegKey $(APPPACEKEY) CloseRegKey $(CARDPACEKEY) CloseRegKey $(COMPACEKEY) CloseRegKey $(SOFTPACEKEY) return [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set CurrLang = $($0) set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms IntstallOptions read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) set NDIS_VER = NDIS4 else set NDIS_VER = NDIS3 endif read-syms DriverFilenameConstants$(NDIS_VER) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE ifstr(i) $(Option) != ELNK3ISA509 set StartLabel = ELNK3EISA&MCAconfigureadapter else set StartLabel = ELNK3ISA509configureadapter endif Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the EtherLink III driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set ActivateDetection = TRUE ifstr(i) $(Option) != ELNK3ISA509 set StartLabel = ELNK3EISA&MCAinstalladapter else set StartLabel = ELNK3ISA509installadapter endif set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif Debug-Output "oemsetup.inf: ==================================================" Debug-Output "oemsetup.inf: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "oemsetup.inf: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "oemsetup.inf: Option is: "$(Option) Debug-Output "oemsetup.inf: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "oemsetup.inf: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "oemsetup.inf: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "oemsetup.inf: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "oemsetup.inf: ==================================================" Set DetectedCard = FALSE Ifstr(i) $(ActivateDetection) != TRUE Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) Endif Ifstr(i) $(Option) != ELNK3ISA509 Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) Endif ifstr(i) $(!NTN_InstallMode) != configure goto SkipBuildTypeList endif Set TypeList = {{IOADDR, IOADDR_Addr_List, IOBaseAddrValue}} Debug-Output "oemsetup.inf: Calling Param_BuildTypeLists" Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList) Set Status = $($R0) ifstr(i) $(Status) != STATUS_SUCCESSFUL Goto fataldetect Endif Debug-Output "oemsetup.inf: Calling Param_SetDefaults" Shell $(ParamInf) Param_SetDefaults {{IOADDR,768}} Shell $(ParamInf) HexListFromDecList $(IOADDR_Addr_List) Set IOADDR_Hex_List = $($R0) Ifstr(i) $(!STF_NCDETECT) == YES Ifstr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE Debug-Output "oemsetup.inf: Setting DetectedCard to TRUE" Endif Endif Shell "" DebugConfiguration "After parameter querying" SkipBuildTypeList = + Set from = $(fatal) Set to = $(fatal) Debug-Output "$(InfFile) $(Option): Jumping to $(StartLabel)" Goto $(StartLabel) ELNK3ISA509installadapter = + Debug-Output "$(InfFile) $(Option): Installadapter" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) $(!NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif Set CurrParamSettings = {} Ifstr(i) $(DetectedCard) != TRUE Goto ELNK3ISA509adaptersetup2 Endif StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto ELNK3ISA509adaptersetup2 Endif Set DetectedParams = $($R1) Debug-Output "oemsetup.inf: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto ELNK3ISA509adaptersetup2 ELNK3ISA509configureadapter = + Debug-Output "$(InfFile) $(Option): Configureadapter" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrValue = $(ValueData) else-ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNumber = $(ValueData) endif EndForListDo Shell $(ParamInf) Param_SaveValues Set CurrParamSettings = $($R0) Debug-Output "CurrParamSettings: $(CurrParamSettings)" ELNK3ISA509adaptersetup = + Debug-Output "$(InfFile) $(Option): AdapterSetup" Shell "" DebugConfiguration "before displaying dialog" Set from = ELNK3ISA509adapteroptions Set IOADDR_Hex_Value = *($(IOADDR_Hex_List), ~($(IOADDR_Addr_List),$(IOBaseAddrValue))) Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "oemsetup.inf: parameter confidence too low to bypass configuration" Goto ELNK3ISA509adapteroptions Endif ELNK3ISA509adaptersetup2 = + Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto ELNK3ISA509adapterverify Endif Endif ELNK3ISA509adapteroptions = + Debug-Output "$(InfFile) $(Option): AdapterOptions" ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto ELNK3ISA509adapterverify endif Ifstr(i) $(!NTN_InstallMode) != configure goto getbustype Endif read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set IOADDR_Hex_Value = $(Combo1Out) Set IOBaseAddrValue = *($(IOADDR_Addr_List), ~($(IOADDR_Hex_List),$(IOADDR_Hex_Value))) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else Debug-Output "Action: unknown. Bye." ui pop 1 goto end endif getbustype = + ifstr(i) $(!STF_NCDETINFO) == {} tryagaingetbustype = + Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) ifint $(BusInterfaceType) == 1 goto ELNK3ISA509adapterverify else-ifint $(BusInterfaceType) == 2 goto ELNK3ISA509adapterverify else set Error = "The Bus Type of 3Com EtherLink III (3c509) Adapter must be either ISA or EISA." set from = end set to = tryagaingetbustype goto warning endif else set BusInterfaceType = *($(!STF_NCDETINFO),5) set BusNumber = *($(!STF_NCDETINFO),6) endif ELNK3ISA509adapterverify = + Debug-Output "$(InfFile) $(Option): Adapterverify" Shell "" DebugConfiguration "after running dialog" Ifstr(i) $(DetectedCard) != TRUE Shell $(ParamInf) Param_SaveValues Set NewParamSettings = $($R0) Debug-Output "NewParamSettings: $(NewParamSettings)" Ifstr(i) $(CurrParamSettings) == {} Set DiffParamSettings = $(NewParamSettings) Else Shell $(ParamInf) Param_DiffValues $(CurrParamSettings) Set DiffParamSettings = $($R0) Endif Debug-Output "oemsetup.inf: Calling Param_VerifyResources" Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "oemsetup.inf: Param_VerifyResources succeeded" Goto ELNK3ISA509skipoptions Endif Else Set CardVerifyIndex = $(!STF_NCDETCARD) Debug-Output "oemsetup.inf: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "oemsetup.inf: Param_VerifyCard succeeded" Goto ELNK3ISA509skipoptions Endif Endif Set from = ELNK3ISA509adapteroptions Set to = ELNK3ISA509skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning ELNK3ISA509skipoptions =+ Debug-Output "$(InfFile) $(Option): SkipOptions" ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto ELNK3ISA509writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)} endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} endif CloseRegKey $(KeyEventLog) Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif endif ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) install "Install-Uninstaller" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + KeyNt set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(!REG_KEY_ALL_ACCESS) KeyNt set LoopList = {1,2,3,4,5,6,7,8} set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} set IDPortList = {IDPORT,$(NoTitle),$(!REG_VT_DWORD),$(IDPORTVALUE)} ForListDo $(LoopList) OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey ifstr $(TestKey) != $(KeyNull) SetRegValue $(TestKey) $(WinNTList) SetRegValue $(TestKey) $(IDPortList) endif CloseRegKey $(TestKey) EndForListDo CloseRegKey $(KeyNt) ifstr $(Install_PACE) == "YES" Debug-Output "$(InfFile) $(Option): (Install_PACE) == "YES"" install "Install-PACE" Shell "", PaceRegistry endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) install "Install-Tray" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {$(TrayIconExe)EXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) ifstr $(Install_3NIC_Diag) == "YES" Debug-Output "$(InfFile) $(Option): (Install_3NIC_Diag) == "YES"" install "Install-3nicdiag" Shell "", DiagRegistry ifstr $(Install_Installer) == "YES" RunProgram ExitCode "Windows Directory" "" $(InstallerExe).EXE "cardtype=TCAUM509" endif Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang),+ "TCAITDI" ,$(SrcDir), YES, YES, YES, NO ifstr(i) $(Install_Shortcuts) == "YES" Debug-Output "$(InfFile) $(Option): (Install_Shortcuts) == "YES"" RunProgram ExitCode "Windows Directory" "" $(TrayIconExe).EXE "-setup" Debug-Output "$(InfFile) $(Option): Enabling Tray Icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {$(TrayIconExe)EXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -try"} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) endif endif endif endif goto ELNK3ISA509writeparameters ELNK3ISA509writeparameters = + Debug-Output "$(InfFile) $(Option): Write" Ifstr(i) $(!NTN_InstallMode) != configure Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}} Else Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}} Endif Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf), AddDefaultNetCardParameters, $(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful ELNK3EISA&MCAinstalladapter = + Debug-Output "$(InfFile) $(Option): Installadapter" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) $(!NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif goto ELNK3EISA&MCAnextstep ELNK3EISA&MCAconfigureadapter = + Debug-Output "$(InfFile) $(Option): configadapter" Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo ELNK3EISA&MCAnextstep = + Debug-Output "$(InfFile) $(Option): nextstep" StartWait ifstr(i) $(Option) == ELNK3EISA set cardlist = {} Shell $(UtilityInf), EISAFindBus, $(ELNK3EISA_1BYTE), $(ELNK3EISA_MASK) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif set cardlist = $($R1) else set cardlist = {} Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),1), *($(ELNK3MCA_2BYTE),1) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != {} set cardlist = $($R1) endif Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),2), *($(ELNK3MCA_2BYTE),2) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != {} ifstr(i) $(cardlist) != {} set cardlist = >($(cardlist),$($R1)) else set cardlist = $($R1) endif endif Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),3), *($(ELNK3MCA_2BYTE),3) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != {} ifstr(i) $(cardlist) != {} set cardlist = >($(cardlist),$($R1)) else set cardlist = $($R1) endif endif Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),4), *($(ELNK3MCA_2BYTE),4) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != {} ifstr(i) $(cardlist) != {} set cardlist = >($(cardlist),$($R1)) else set cardlist = $($R1) endif endif Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),5), *($(ELNK3MCA_2BYTE),5) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != {} ifstr(i) $(cardlist) != {} set cardlist = >($(cardlist),$($R1)) else set cardlist = $($R1) endif endif endif ifstr(i) $(cardlist) == {} ifstr(i) $(Option) == ELNK3EISA set Error = "Cannot find any 3Com Etherlink III (3c579) EISA Adapters." else set Error = "Cannot find any 3Com Etherlink III (3c529) MCA Adapters." endif set CommonStatus = STATUS_USERCANCEL set from = "end" goto nonfatal endif set AdapterList = $(cardlist) ifint $(OldVersionExisted) == $(FALSE) install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)} endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} endif CloseRegKey $(KeyEventLog) Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ForListDo $(AdapterList) set BusNum = *($($),1) set SlotNum = *($($),2) Ifstr(i) $(Option) == ELNK3MCA set McaPosId = *($($),3) endif Debug-Output $(BusNum) Debug-Output $(SlotNum) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(SlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Ifstr(i) $(Option) == ELNK3EISA set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),2},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {EisaCompressedId,$(NoTitle),$(!REG_VT_DWORD),$(ELNK3EISA_COMPRESSID)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}} else set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),3},+ {McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(McaPosId)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),2},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}} endif Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) CloseRegKey $(HardParameterKey) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif EndForListDo ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif endif ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) install "Install-Uninstaller" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + KeyNt set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(!REG_KEY_ALL_ACCESS) KeyNt set LoopList = {1,2,3,4,5,6,7,8} set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} ForListDo $(LoopList) OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey ifstr $(TestKey) != $(KeyNull) SetRegValue $(TestKey) $(WinNTList) endif CloseRegKey $(TestKey) EndForListDo CloseRegKey $(KeyNt) ifstr $(Install_PACE) == "YES" Debug-Output "$(InfFile) $(Option): (Install_PACE) == "YES"" install "Install-PACE" Shell "", PaceRegistry endif endif goto ELNK3EISA&MCAwriteparameters ELNK3EISA&MCAwriteparameters = + EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif Ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER) RunProgram ExitCode "Windows Directory" "" UN3c509a.EXE "-inf" endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\TCAITDI" $(!REG_KEY_READ) KeyTCATDI ifstr $(KeyTCATDI) != "" Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang),"TCAITDI" ,$(SrcDir), YES, YES, YES, -inf CloseRegKey $(KeyTCATDI) endif goto end UpgradeSoftware = + Debug-Output "Looking at Key: "$(ProductKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Debug-Output "Looking at Key: "$(MS_ProductKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(MS_ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct endif Ifstr $(KeyProduct) != $(KeyNull) install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(!REG_KEY_ALL_ACCESS) KeyNt set LoopList = {1,2,3,4,5,6,7,8} set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} set IDPortList = {IDPORT,$(NoTitle),$(!REG_VT_DWORD),$(IDPORTVALUE)} ForListDo $(LoopList) OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey ifstr $(TestKey) != $(KeyNull) SetRegValue $(TestKey) $(WinNTList) SetRegValue $(TestKey) $(IDPortList) endif CloseRegKey $(TestKey) EndForListDo CloseRegKey $(KeyNt) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-INF" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif Debug-Output "Changing Reg Version Nubmers!" SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)} else goto fatalregistry endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} else goto fatalregistry endif CloseRegKey $(KeyEventLog) ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) install "Install-Uninstaller" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + KeyNt set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) ifstr $(Install_PACE) == "YES" Debug-Output "$(InfFile) $(Option): (Install_PACE) == "YES"" install "Install-PACE" Shell "", PaceRegistry endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) install "Install-Tray" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {$(TrayIconExe)EXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) ifstr $(Install_3NIC_Diag) == "YES" Debug-Output "$(InfFile) $(Option): (Install_3NIC_Diag) == "YES"" install "Install-3nicdiag" Shell "", DiagRegistry set InstallMode_Save = $(!NTN_InstallMode) set !NTN_InstallMode = install set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) set !STF_SRCDIR_OVERRIDE = $(SrcDir) Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang), + "TCAITDI" ,$(SrcDir), YES, YES, YES, NO set !NTN_InstallMode = $(InstallMode_Save) set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) Debug-Output "$(InfFile) $(Option): (Install_Shortcuts) == $(Install_Shortcuts)" ifstr(i) $(Install_Shortcuts) == "YES" Debug-Output "$(InfFile) $(Option): (Install_Shortcuts) == "YES"" RunProgram ExitCode "Windows Directory" "" $(TrayIconExe).EXE "-setup" Debug-Output "$(InfFile) $(Option): Enabling Tray Icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {$(TrayIconExe)EXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -try"} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) endif endif endif endif else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "Oemsetup.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue) return [Install-Option] set STF_OVERWRITE = "VERIFYSOURCEOLDER" set STF_VITAL = "" Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)" AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)WIN32\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-3nicdiag] set STF_OVERWRITE = "VERIFYSOURCEOLDER" set STF_VITAL = "" AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-TCAITDI $(SrcDir)winnt $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-Tray] set STF_OVERWRITE = "VERIFYSOURCEOLDER" set STF_VITAL = "" AddSectionFilesToCopyList Files-Tray $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-INF] set STF_OVERWRITE = "VERIFYSOURCEOLDER" set STF_VITAL = "" AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-PACE] set STF_OVERWRITE = "VERIFYSOURCEOLDER" set STF_VITAL = "" AddSectionFilesToCopyList Files-PACE $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-Uninstaller] set STF_OVERWRITE = "VERIFYSOURCEOLDER" set STF_VITAL = "" AddSectionFilesToCopyList Files-Uninstaller $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Source Media Descriptions] 1 = "Windows NT Setup Disk #1" , TAGFILE = disk1 2 = "Windows NT Setup CD-ROM Disk" , TAGFILE = disk2 3 = "3Com Etherdisk for Etherlink III", TAGFILE = oemsetup.inf [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 3, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-3nicdiag] 3,TCAUDIAG.EXE, SIZE=165504 3,TCAUDIAG.URL, SIZE=15 3,TCAUDIAG.HLP, SIZE=20877 3,TCAUPROT.HLP, SIZE=20877 3,TCAUM509.HLP, SIZE=20877 3,TCAUDCUS.TXT, SIZE=113 3,TCAUDEXP.TXT, SIZE=113 3,TCAUDVAR.TXT, SIZE=113 3,TCAUPROT.DLL, SIZE=12345 3,TCAUM509.DLL, SIZE=12345 [Files-HwDll] 3,TCAMHWAC.DLL, SIZE=20198 3,TCAICCHG.SYS, SIZE=5000 [Files-TCAITDI] 3,TCAITDI.INF, SIZE=15000 [Files-Tray] 3,TCASUTI.EXE, SIZE=8957 [Files-PACE] 3,pacecfg.cpl, SIZE=108384 3,pacecfg.hlp, SIZE=18072 [Files-Uninstaller] 3,UN3C509A.EXE, SIZE=6617 [Files-NDIS4] 3,ELNK3ND4.SYS , SIZE=42496 [Files-NDIS3] 3,ELNK3ND3.SYS , SIZE=42496 [LanguagesSupported] ENG [OptionsTextENG] ELNK3ISA509 = "3Com Etherlink III (3c509) ISA Adapter" ELNK3EISA = "3Com Etherlink III (3c579) EISA Adapter" ELNK3MCA = "3Com Etherlink III (3c529) MCA Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "3Com Etherlink III Adapter Card Setup" ProductSoftwareDescription = "3Com Etherlink III Adapter Driver" ProductSoftwareTitle = "3Com Etherlink III Adapter Driver" ProductHardwareELNK3ISA509Title = "3Com Etherlink III (3c509) ISA Adapter" ProductHardwareELNK3ISA509Description = "3Com Etherlink III (3c509) ISA Adapter" ProductHardwareELNK3EISATitle = "3Com Etherlink III (3c579) EISA Adapter" ProductHardwareELNK3EISADescription = "3Com Etherlink III (3c579) EISA Adapter" ProductHardwareELNK3MCATitle = "3Com Etherlink III (3c529) MCA Adapter" ProductHardwareELNK3MCADescription = "3Com Etherlink III (3c529) MCA Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." TransceiverList = {"10 Base T", "Thick Net (AUI/DIX)", "Thin Net (BNC/COAX)"} TransceiverDisplayList = {"10 Base T", "Thick Net (AUI/DIX)", "Thin Net (BNC/COAX)"} [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Label1 = "I/O &Port Address:" DlgType = "MultiCombo" DlgTemplate = "SINGLE_COMBO" Caption = $(FunctionTitle) Combo1List = $(IOADDR_Hex_List) Combo1Out = $(IOADDR_Hex_Value) ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} NotifyFields = {NO, NO, NO} HelpContext = $(!IDH_DB_OEMNADE3_INS)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.