readme.txt Driver File Contents (s3c2410bsp_ce410_v102.zip)

S3C2410X USB downloader Installation Guide Release 0.1
                                           APR.01.2002

1. Release History
r0 :MAR/24/02: -First release
r1 :APR/01/02: -Second release
		dnw.exe is upgraded to version 0.46.
		u241mon.bin is upgraded to fix some small bug.

2. Files
dnw.exe: PC USB/Serial downloader program
	 (dnw.exe isn't included. Please download the latest dnw.exe from www.samsungsemi.com.)
secbulk.inf,secbulk.sys: PC USB driver
u241mon.bin: S3C2410X USB downloader firmware


3. Installation.
1) Program the u241mon.bin into the flash memory of SMDK2410X board. 
2) Configure the J35,J36 to 1-2.
3) Turn on the board. The LED will flash. If doesn't, go to step 1) and check the board.
4) If you had installed the device driver for SMDK2400X/SMDK2410X,
   overwrite the new secbulk.sys at C:\WINDOWS\SYSTEM32\DRIVERS.
   In this case, the step 6) will be skipped.
   The old secbulk.sys is optimized for SMDK2400. So, the maximum speed will be 490KB/S
   But, the new secbulk.sys is optimized for SMDK2410. So, the maximum speed will be about 770KB/S
5) connect the SMDK2410X board and PC
6) When the USB device driver installation window apper,
   install the USB device driver(secbulk.inf).
   secbulk.inf and secbulk.sys should be in the same directory. 
7) run dnw.exe.
8) Turn off and on the board.
9) If you can see the message([USB:OK]) in the window title bar, the installation succeeds.


4. download a .bin file.
1) Configure the serial port in the Configuration/Options menu.
2) Configure the download address,normally 0x30000000, in the menu.
3) Select the SerialPort/Connect menu to open COM port if you need.
4) Turn off and turn on(or Reset) SMDK2410X board to get USB device address from PC.
5) You can see the U241MON banner as follows;

+---------------------------------------------+
| S3C2410X USB Downloader ver 0.11 04/01/2002 |
+---------------------------------------------+
FCLK=180MHz,DMA mode
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
NOTE: Power off/on or press the reset button for more than 1 sec
      in order to get a valid USB device address.

#### Select Menu ####
[0]Download & Run  [1]Download Only  [2]Memory Test

Download&Run is selected.

PC is connected. I'm ready for download.


6) Select the USBPort/Transmit to transmit a .bin/.nb0 file.
  
  
6. Contact Point
If you have any questions, send us e-mail.
e-mail address : purnnamu@sec.samsung.com,purnnamu@hitel.net


7. Important Notice.
We have done best to remove bugs in these programs. But, there may be some bugs.
If you want to use the USB downloader commercially, we can't guarantee these programs.
		  
  
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.67