README.TXT Driver File Contents (5620_win9x.zip)

README.TXT for the installation and uninstall for modem part number
6000758.

If you have had a modem previously installed please follow the 
uninstall steps below before installing the new modem. If this 
is a first time installation or if you are installing after 
formatting and reloading, skip to the modem install for the correct
operating system.

Windows 95/98 Uninstall

1.   Go to Device Manager. Highlight U.S.
     Robotics 56K Voice Win and click
     Properties. 

2.   Go to Port Settings tab and click on the
     Uninstall button. 

3.   The wizard warns that the device is about to
     be removed. Click OK to continue. 

4.   For the uninstall to complete properly, click
     OK to finish and close the Device Manager.
 

Windows 95 Installation

1.   When the system is started, the modem is
     detected. The wizard will search out drivers to
     load. Click Next to continue. 

2.   The wizard has found the correct driver. Click
     Next to continue with the installation. 

3.   A window displays asking for the diskette.
     Make sure that the correct path to where the
     driver was downloaded to is listed and click OK. 

4.   Another window may display saying it cannot
     find a file needed to load the drivers for the
     modem. Make sure the path is correct and then
     click OK. 

5.   The files are copied to the hard drive. The next
     part of the installation is to install the wave
     device drivers for the modem. Click Next to
     continue with the installation. 

6.   The appropriate drivers have been found. Click
     Finish to copy the files and to finish the
     installation of the modem. 

Windows 98 installation

1.   When the system starts, the modem is
     detected. The wizard will search out drivers to
     load. Click Next to continue. 

2.   The wizard will automatically search the hard
     drive for the drivers but will give you the
     option to choose what other devices to check.
     Choose browse and go to the directory in which the 
     driver was downloaded to.
     Click Next to continue. 

3.   The wizard searches for the driver. 
 
4.   The wizard has located the device driver. Click
     Next to continue with the installation. 

5.   The files are copied. 

6.   Windows has finished installing the software
     for the modem. Click Finish to continue. 

7.   The wizard goes back out and searches for
     the wave device drivers. Click Next to
     continue. 

8.   The wizard prompts you for what to do.
     Make sure to select Search for the best
     driver for your device (Recommended)
     and click Next. 

9.   The wizard will automatically search the hard
     drive for the drivers but gives you the
     option to choose what other devices to check.
     Choose browse and go to the directory in which the 
     driver was downloaded to.
     Click Next to continue. 

10.  The wizard locates the appropriate driver.
     Click Next to continue. 

11.  The wave driver installation has completed.
     Click Finish to continue. 

                 


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.01