****** U.S. Robotics Courier V.Everything V.92 update ******
Below are the added V.92 commands and a list of possible values. Use the i92 command to display
the current and stored values.
+p Command format
+Pcc=nn Assign value
+Pcc=? Display allowed values
+Pcc? Display current value
+pBI=n n=0 Biased upstream
n=1 Balanced
n=2 Biased downstream
+pCR=n n=0 Request fast reconnect to server
n=1 Disconnect from server
n=2 Request to accept call
n=3 Flash hook and reconnect
n=4 Flash hook and disconnect
n=8 Switch to telephone
n=9 Switch back to data
+pCW=n n=0 Process call waiting
n=1 Disconnect on call waiting
n=2 Ignore call waiting
+pIG=n n=0 Enable PCM upstream
n=1 Disable PCM upstream
+pMH=n n=0 Enable Modem on Hold
n=1 Disable Modem on Hold
+pMHR Request Modem on Hold
+pMHT? Display Modem on Hold timeout
+pQC=n n=0 Enable phase 1 and phase 2 of QC
n=1 Disable phase 1 and enable phase 2
n=2 Enable phase 1 and disable phase 2
n=3 Disable phase 1 and phase 2 of QC
+pSS=n n=0 Modem decides on short sequences
n=1 Short sequence as per +pQC
n=2 Force full startup procedure
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.