1. 568603.zip Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (568603.zip)

*******************   U.S. Robotics Readem Sections   ********************
There are three (3) sections to this readme, please take the time to read them.

1. U.S. Robotics Modem Firmware Update
2. U.S. Robotics Modem Driver Update
3. U.S. Robotics Internet Call Notification Update


****************   U.S. Robotics Modem Firmware Update    ****************

The modem flash upgrade process will automatically begin upon the completion of
the current download process.


****************   U.S. Robotics Modem Driver Update    ****************

Please exit out of ControlCenter.

****************
Windows 95 Users
****************

- To upgrade the modem driver, right click the "My Computer" icon on your
  desktop and click "Properties".
- Click the "Device Manager" tab and double-click "Modems".
- Double-click the modem that you just upgraded and select the "Driver" tab.
- Click "Update Driver".
- Click "Next".
- Click "Other Locations".
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and
  click "OK".
- Click "Finish" to complete the installation procedure.

****************
Windows 98 Users
****************

- To upgrade the modem driver, right click the "My Computer" icon on your
  desktop and click "Properties".
- Click the "Device Manager" tab and double-click "Modems".
- Double-click the modem that you just upgraded and select the "Driver" tab.
- Click "Update Driver".
- Click "Next".
- Make sure that "Search for a better driver..." is selected and click "Next".
- Click "Specify a location".
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and
  click "OK".
- Click "Next".
- Click "Next".
- Click "Finish" to complete the installation procedure.

****************
Windows Me Users
****************

- To upgrade the modem driver, right-click the "My Computer" icon on your
  desktop and select "Properties".
- Click the "Device Manager" tab and double-click "Modems".
- Double-click the modem that you just upgraded and select the "Driver" tab.
- Click "Update Driver".
- Choose "Specify the location of the driver".
- Click "Next".
- Choose "Specify a location".
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and
  click "OK".
- Click "Next".
- Click "Next".
- Click "Finish" to complete the installation procedure.

****************
Windows 2000 Users
****************

- To upgrade the modem driver, right click the "My Computer" icon on your
  desktop and click "Properties".
- Click the "Hardware" tab, click "Device Manager" and then 
  double-click "Modems".
- Double-click the modem that you just upgraded and select the "Driver" tab.
- Click "Update Driver".
- Click "Next".
- Make sure that "Search for a suitable driver" is selected and click "Next".
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and
  click "OK".
- Click "Next".
- A "Digital Signature Not Found" warning may appear.
  If it does, click "Yes" to proceed with the installation.
- Click "Finish" to complete the installation procedure.

****************
Windows XP Users
****************

- To upgrade the modem driver, Click "Start" right click "My Computer" and
  click "Properties".
- Click the "Hardware" tab, click "Device Manager" and then
  double-click "Modems".
- Double-click the modem that you just upgraded and select the "Driver" tab.
- Click "Update Driver".
- Choose "Install from a specific location" and click "Next".
- Click "Have Disk".
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and
  click "OK".
- Click "Next".
- A "Digital Signature Not Found" warning may appear.
  If it does, click "Continue Anyway" to proceed with the installation.
- Click "Finish" to complete the installation procedure.


****************
Windows NT Users
****************

- Log in with administrator rights to upgrade the modems driver.
- Click Windows "Start", select "Settings" and then "Control Panel".
- Double-click the "Modems" icon.
- Select the modem that you just upgraded and click "Remove".
- Click "Yes".
- Click "Add".
- Select "Don't detect my modem" and click "Next".
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and click "OK".
- Select the modem that you just upgraded and click "Next".
- Select the "COM port" for the modem to use and click "Next".
- Click "Finish" to complete the installation procedure.

**********   U.S. Robotics Internet Call Notification Update   ***********

The latest Firmware for your modem will also require an update to the latest
Internet Call Notification (ICN).  

The modem's default for the incoming call waiting tone is +PCW=2.  This has
been changed so that the connection between your Dial-Up Networking (DUN) and
your Internet Service Provider (ISP) does not compromise ICN and
Modem on Hold (MoH).  If ICN is not running, the modem is not capable of
providing MoH.   

If for any reason you have the original Buzzme version of ICN and do not wish
to uninstall it,  follow the steps below to add +PCW=0.  

- Select "Start," "Settings," "Control Panel."
- Double-click "Modems."
- Select "U.S. Robotics 56K FAX EXT PnP."
- Click "Properties."
- Select  the "Connection" tab.
- Click "Advanced."
- In the "Extra Settings" section, add "+PCW=0" without the quotes.
- Click "OK."
- Click "OK."
- Click "Close."

If you had the original release of ICN from Buzzme,  follow the steps below to
upgrade to the latest version.

****************
Uninstall ICN (Buzzme version)
****************

- Select "Start," "Program Files," "U.S. Robotics," "Internet Call Notification."
- Select "Uninstall Internet Call Notification."
- After uninstall is complete restart  the computer.
After the computer is restarted:
- Browse to "C:\Program Files\U.S. Robotics\ControlCenter\xx56860x" and 
- Double-click on "ICN_2.01.17.exe."

****************
Uninstall ICN (U.S. Robotics version)
****************

- Go to "Start," "Settings," "Control Panel."
- Double-click on "Add/Remove Programs."
- Select "U.S. Robotics Internet Call Notification."
- Click on "Add/Remove."
- After the uninstall is complete, restart the computer.
After the computer is restarted:
- Browse to "http://www.usr.com/v92/v-icn.asp?patch=5686" and
- Download and run "ICNSetup_3_0_0_4.exe".