Windows 95 Turbo Display Driver Installation Instructions
=========================================================
1. Insert the "Windows 95 Display Driver Diskette" into drive A
2. Press the right button of mouse in the Windows 95 wallpaper area
3. Select "Properties"
4. Choose the "Settings" Tab in the "Display Properties" window
5. Select "Change Display Type"
6. Select "Change" in the "Adapter Type" section
7. Select "Have Disk"
8. In the "Install from Disk" window change the
"Copy manufacture's files from A:" to
"Copy manufacture's files from A:\WIN95"
9. Select "OK" in the "Install from Disk" window
10. Select "OK" in the "Select Device" window
11. After all drivers are copied, select "Close" in the "Change Display Type"
window
12. Select "Apply" or "Close" in the "Display" window
13. Restart Windows 95
Trouble Shooting:
=================
Q: Use the Refresh Rate Control in the Display Property Sheet to switch
the display card to the high frequency (e.g.120Hz), and there is no
video in the monitor (Cause of the monitor does not support this
high frequency mode). After the PC is power off and then power on.
But the Windows 95 always set to the high frequency mode.
How can I change the display card back to the low frequency mode ?
A: Solution 1: Change the Windows 95 to the "Safe mode" and Re-Setup
the Windows settings as the following steps:
Step 1: Power on the PC
Step 2: Press F5 to enter the "safe mode" or
press F8 to enter the booting selection menu ans then
select the "safe mode"
Step 3: Run the "settings" in the Display Property
Step 4: Select the mode your wanted
Step 5: Select the "Apply" button
Step 6: Restart the Windows 95
Solution 2: Change the Windows 95 to the "Safe mode" and Re-Install
the Windows 95 Display Driver as the following steps:
Step 1: Power on the PC
Step 2: Press F5 to enter the "safe mode" or
press F8 to enter the booting selection menu ans then
select the "safe mode"
Step 3: Re-Install the Windows 95 Driver
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.