1. 250nt40.zip Driver
2. S250VP.INF File Contents

S250VP.INF Driver File Contents (250nt40.zip)

;
; Windows NT 4.00 driver version 1.03.02
;

[Version]
Signature="$CHICAGO$"
Provider=%Leadtek%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display

[DestinationDirs]
DefaultDestDir  = 11
S3Inc.Miniport  = 12  ; drivers
S3Inc.Display   = 11  ; system32
S3Inc.ConfigFile= 12  ; config files to the drivers directory
S3Inc.Inf       = 17  ; inf

;
; Driver information
;

[Manufacturer]
%Leadtek%   = S3.Mfg

;
; This section should be modified to reflect the chip strings the
; user will see in the Displays applet when the new driver is being
; installed from the driver diskette.
;
[S3.Mfg]
;%S3% 86C911/86C924/86C928/86C928PCI  = S3Inc
;%S3% 86C801/86C805/86C805i           = S3Inc
;%S3% Vision864/964/866/868/968       = S3Inc
;%S3% Trio32/Trio64/Trio64V+/Trio64V2 = S3Inc
%Leadtek% WinFast S250V Plus = S3Inc


;
; General installation section
;

[S3Inc]
CopyFiles=S3Inc.Miniport, S3Inc.Display, S3Inc.ConfigFile, S3Inc.Inf

;
; File sections
;

[S3Inc.Miniport]
s3mini.sys      ; miniport driver

[S3Inc.Display]
s3disp.dll      ; display driver

[S3Inc.Inf]
s250VP.inf

;
; To install a mode/refresh configuration file with the drivers:
;
; 1) Remove the leading ";" in the "%S3ConfigFile%" line in the
;    [S3Inc.ConfigFile] section below.  This will allow the configuration
;    file to be copied from the driver diskette to the target system.
; 2) Set S3ConfigFile to the mode/refresh filename in the [Strings] section.
;
[S3Inc.Configfile]
%S3ConfigFile%

;
; Service Installation
;

[S3Inc.Services]
AddService = S3Inc, 0x00000002, S3Inc_Service_Inst, S3Inc_EventLog_Inst

[S3Inc_Service_Inst]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 1                  ; SERVICE_SYSTEM_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary  = %12%\s3mini.sys

[S3Inc_EventLog_Inst]
AddReg = S3Inc_EventLog_AddReg

[S3Inc_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\s3mini.sys"
HKR,,TypesSupported,0x00010001,7


;
; Software Installation
;

[S3Inc.SoftwareSettings]
AddReg = S3Inc_SoftwareDeviceSettings
AddReg = S3Inc_Configuration   ; mode/refresh config file section

;
; This section is used to place the mode/refresh configuration filename
; in the Registry.  DO NOT modify this section!
;
[S3Inc_Configuration]
HKR, , ModeCfgFile, %REG_EXPAND%, \SystemRoot\system32\drivers\%S3ConfigFile%


[S3Inc_SoftwareDeviceSettings]
HKR,, InstalledDisplayDrivers,     %REG_MULTI_SZ%, s3disp
HKR,, VgaCompatible,               %REG_DWORD%,    0


;
; Source file information
;

[SourceDisksNames]
1 = %DiskId%,,,""

[SourceDisksFiles]
s3mini.sys      = 1     ; all files on Disk 1
s3disp.dll      = 1
s250VP.inf      = 1
%S3ConfigFile%  = 1


[Strings]
REG_SZ        = 0x00000000
REG_MULTI_SZ  = 0x00010000
REG_EXPAND_SZ = 0x00020000
REG_BINARY    = 0x00000001
REG_DWORD     = 0x00010001
SERVICEROOT   = System\CurrentControlSet\Services
autodetect    = "Autodetect driver"
vgacompat     = "VGA compatible display adapter"
GraphAdap     = "Graphics Adapter"
CompatAdap    = "Compatible Graphics Adapter"
;
; Localizable Strings
;

DiskId      = "WinFast S250V Plus Windows NT 4.0 Driver Diskette"
Leadtek     = "Leadtek"

;
; Add the name of the mode/refresh configuration file here (also see the
; [S3Inc.Configuration] section above.
;
; If no mode/refresh configuration file is included, set S3ConfigFile = ""
;
S3ConfigFile = "S250VP.CFG"