This document describes procedures for the installation and updating of CAC Bullet and Bullet33 device driver. The procedures described herein assume that the Bullet hardware is already installed in your system. This document includes the following sections: A. Installing the Device Driver - for "First Time" installation. B. Updating the Device Driver - for upgrades FROM prior software releases. ================================ A. Installing the Device Driver ================================ If this is the first time the Bullet software has been installed in your system, and board is installed in the computer, Windows will have opened a "Found New Hardware Wizard" dialog box when you first logged on. If you have already canceled the Hardware Update Wizard window, open the device manager and scan for hardware changes, see steps 1 - 4 and 8 - 10 under "Updating the Device Driver" If you are updating the Bullet software from a prior version, please read section B, "Updating the Device Driver". 1. Select the "Install from a list or specific location (Advanced)" radio button and click on the "Next" button of the "Found New Hardware Wizard". 2. Select the "Don't search. I will choose the driver to install" radio button and click on the "Next" button. 3. Click on the "Have Disk..." button. 4. Click on the "Browse..." button and search for win/win2k under the directory where the CAC software was installed, (the default directory is c:\cacdsp\win\win2k) and click the "OK" button. 5. Select the CACDSP SIGNAL PROCESSOR and click the "Next" button. ============================== B. Updating the Device Driver ============================== If you are updating the Bullet software from a previous release. 1. Open the Control Panel from the Windows "Start" button, select "Settings" then "Control Panel". 2. From the "Control Panel" window select and run the "System" control panel. This will open a window titled, "System Properties". 3. In the "System Properties" window, choose the tab at the top labeled "Hardware". 4. Click on the "Device Manager" button. This will open the "Device Manger" window. 5. In the list of device types displayed there should be an entry named "CACDSP". Expand the list by clicking the "+" to the left of "CACDSP". This should reveal one or more devices named, "CACDSP" or "BULLETDsp". 6. For each "CACDSP" or "BULLETDsp" device listed in step 5, right click on the device and select "Uninstall" from the menu that appears. Click "OK" in the "Confirm Device Removal" window. 7. Repeat step 6 for all of the "CACDSP" entries in the "Device Manager" window. When the last of these is removed if there are no other devices under "CACDSP", then the "CACDSP" device type will also be removed. 8. In the upper left-hand corner of the "Device Manager" window click on "Action" and in the menu that appears and select "Scan for hardware changes". 9. The computer will scan for new hardware and should detect the bullet devices. The devices should then reappear in the list of devices under the "CACDSP" device type. 10. The Found New Hardware Wizard should be displayed. Follow the steps under "Installing the Device Driver".Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.