README2.TXT Driver File Contents (r10632en.exe)

README SUPPLEMENT FOR PS DRIVERS
Last Modified: 2005/09/01

1. Note for HP LJ8100 users.
The older Hewlett Packard LaserJet 8100 PCL 6 driver may interfere with 
the PostScript driver.  To avoid this problem use LaserJet 8100 PCL6 driver 
V4.3.2.38 or later.

2. Collation
When printing multiple copies, turn off collation in the application and 
turn "Collate" on, on the "DeviceOption" tab.  With some applications, 
collation may significantly slow down your computer.  And, some functions 
may not work correctly.

3. Collation
(Windows 2000/XP)
Though "Collated" check box becomes available after setting multiple 
numbers of copies by "Copy Count:" in "Advanced Options" dialog, 
be sure to set "Collated" check box OFF in performing printing.
Collate function must be set by "Document Options" - "Printer Features"-
"Collate" in "Advanced Options" dialog. 

4. Store file without HDD.
(Windows NT4.0/2000/XP, Macintosh)
When the HDD is not installed, the printer do not support Store file, 
and these are automatically disabled.  The printer will 
print the job as Normal Print.
Even though the HDD is not installed, "Store file" can be selected 
in the driver.

5. Printing from NetScape4.7
(Macintosh)
In Printing with NetScape 4.7, it may cause gridlock and the termination 
of the application in use.
If you use NetScape, be sure to use NetScape 6 or later. 

6. MS Word98 document with mixed orientation.
(Macintosh)
Printing of Macintosh MS Word98 document with mixed paper orientation may 
produce unexpected result if multiple copies, staple, or duplex is selected.

7. Printing from PageMaker
(Macintosh)
When printing a document from Macintosh PageMaker, the printer may show 
"Load Letter" on the operation panel and wait for letter paper.  
In order to avoid this wait, set letter paper in one of the input tray, or 
turn off Macintosh "Background Print".  
(Note you have to turn off "Background Print" from the Finder.)

8. Watermark and QuarkXpress 4.1
(Windows 95/98/Me, Macintosh)
QuarkXpress 4.1 document may not be printed as expected if Watermark 
is selected. 

9. Custom Size Setup
(Windows NT4.0/2000/XP)
Warning dialog may be displayed even though entering the values within 
maximum and minimum available values for custom size specified in custom 
size setup dialog. In this case, please reduce the values to be less than 
the entered values even if they are within the available range.

10. Printing Custom Size Document from MS-Word
(Windows NT4.0/2000/XP)
When printing MS Word document using Custom Size, the document may not as 
expected.

11. Printing Custom Size Document from Acrobat
(Windows 95/98/Me)
Neither Acrobat 5 nor Acrobat Reader 5 can not use "Other Custom Paper". 
Use other custom size selection.

12. Data Format
(Windows 95/98/Me/NT4.0/2000/XP)
Be sure to select "ASCII" to perform "Data format"(Windows 9x) or 
"Output Protocol"(Windows NT4/2000/XP).
If set to "TBCP" or "Binary" to perform above operation, please set the
same to machine.
Otherwise, it may cause PS error or incorrect setting of numbers of copies.

13. Separator Page
(Windows 95/98/Me/NT4.0/2000/XP)
If a Separator Page is selected, some document may not print as expected.

14. Custom Size setting
(MacOSX Classic Mode)
If click "OK"button without naming Custom Size newly created on MacOSX 
Classic Mode, application may be terminated.
When set Custom Size on MacOSX Classic Mode, be sure to enter the newly 
created Custom Size name before click "OK" button. 

15. Printing from PageMaker
(Macintosh)
If print with "Store file" or "User Code" with the application except 
PageMaker and print with PageMaker after that, the previous setting 
of  "Store file" or "User Code" is succeeded to the next printing 
with PageMaker.

16.Form To Tray Assignment
(Windows NT4.0/2000/XP)
Do not select "Form To Tray Assignment" item in "Device setting" tab.

17. Page Layout (N-up) function
(Windows NT4.0)
Page Layout (N-up) function does not work with MS-Word2002.

18. Page Layout (Booklet) function
(Macintosh)
Booklet printing does not operate properly in printing under Macintosh 
Acrobat.

19. Disorder when pressing "Stop"button in using MacOSX Classic Mode 
(Macintosh)
If stop printing with "Stop" button in using the printer with MacOSX 
Classic Mode, sometimes printer freezes with "Waiting..." status.

20. Printing the document with the plural Simplified Chinese fonts.
(Windows XP)
The document with the plural Simplified Chinese fonts might not be printed 
as expected.

21. Printing from PageMaker
If you use PageMaker in the Simplified Chinese environment, please use 
the English-language version of PPD file.
When PageMaker is used for the Simplified Chinese-language version's PPD 
file, the items of "Destination" may not be displayed.

22. Printing from Visio2002 with resolution of 1200dpi
Printing from Visio2002 with resolution of 1200dpi may not be performed
properly. In such case, set the resolution lower than 600 dpi.

23. Print From Microsoft Word enabling Slip Sheet
If print from Microsoft Word enabling Slip Sheet, Slip Sheet feeding may
not be conducted properly.In this case, perform printing after selecting
"Default Tray" in "Page Setup" -> "Paper Source".

24. Output Protocol
(Windows 95/98/Me/NT4.0/2000/XP)
When output destination of installed driver is network port, output protocol
will be set to binary. If redirect the output to LPT1 or USB port remaining
the above setting, PS Error may occur. If redirect the output destination from
network port to LPT1 or USB port, please set the output protocol to ASCII.

25. Printing from CorelDraw with "Different paper for first page" setting
(Windows 95/98/Me)
When printing from CorelDraw, "Different paper for first page" function is 
unavailable.All the pages will be fed from the Paper Source Tray that the
first page is fed from.

26. Displaied file names on the peration panel.
If print a data whose file name includes Chinese, Korean, etc.(languages 
other than Latin1), the file name will not be displayed correctly on the 
operation panel. 

27. Separate into CMYK
Printed result on "Separate into CMYK" may be incorrect, it depends on
application.

28. Printing from Microsoft OfficeXP
(Windows 98/Me/NT4.0/2000/XP)
When printing with AutoShape, if selecting texture pattern, the printed 
result may not be as expected.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.61