1. enw3503v410.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (enw3503v410.zip)

PCMCIA Ethernet/Fax/Modem

        Installation for Microsoft Windows 2000

  Contents
  ÄÄÄÄÄÄÄÄ
       Introduction
       Getting Started
       Modem Diagnostics
       Add LAN protocols
       Troubleshooting

  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
       Windows 2000 provides a complete "Plug n' Play" System that will
       automatically recognize and configure most PC Cards.

       Before inserting your LanModem PC Card, the system's PCMCIA chipset
       must be enabled and functioning. The PCMCIA chipset is responsible
       for controlling the systems interface for PC Cards. Please consult
       the system's manual or manufacture for use with Windows 2000.

       Multifunction PC Card put a heavy demand on a system's resources.
       Please resolve all system conflicts, errors, and Windows 2000
       issues before installing the LanModem.

       Please have the installation media for the Windows 2000 ready for
       any request for files.

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       With the system off, remove all PC Cards

       Start/Boot Windows 2000

       Insert the LanModem into one of the system's PCMCIA Slots

       A "Found New Hardware Wizard" dialog box should appear, see
        troubleshooting if the dialog box doesn't appear.

       Click Next icon and Windows 2000 will show "Locate Driver Files" box.

       Select "Floppy disk drivers" and Click Next icon and Windows 2000
        will begin searching for LanModem inf files.

       After finding the matching inf files, Click Next icon and Windows 2000
        will copy driver for LanModem.

       Click OK and "Files Needed" box will display.

       Click Browse and Locate driver in A: and Click OK.

       Click Finish and Windows 2000 will begin to install Lan and Modem
        devices.

       Reboot the computer.

  Modem Diagnostics
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
      Open the MY COMPUTER

      Run the CONTROL PANEL

      Run the MODEMS

      Select LanModem Card and Click Properties icon

      Click Diagnostics tab and Click Refresh icon


  Add LAN protocols
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
      Open the MY COMPUTER

      Run Network Connections

      Click Local Area Connection and Select File/Properties

  Troubleshooting
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
      When using modem application tools, type AT command and get no respones,
       Select "Direct to COM2(COM3, COM4), instead of LanModem Card.



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.