CARDTEST Ethernet PCMCIA Adapter Test Program
CARDTEST.EXE is a complete test program that verifies
if the PCMCIA adapter is working properly at the hardware
level. It provides the following functions:
. IRQ verification
. IO base verification
. RAM test
. Adapter Node ID test
. Internal Loopback test
. External Loopback test
Usage: cardtest [/Q:x] [/I:yyy]
x : The IRQ number of adapter. Default value 5
yyy : The I/O base address of adapter. Default value 300 (hexadecimal)
Before you use CARDTEST.EXE, use CARDOPEN.EXE to enable the
Ethernet PCMCIA Adapter as follows:
CARDOPEN
or
CARDOPEN /INT=x /PORT=yyy
Where the values of x and yyy must match those specified for
CARDTEST.EXE.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.